I/O device error

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Update keeps installing...not sure where to start "Security update for xml core services 4.0" keeps updating on my computer. But my Windows Live OneCare is warning me that I need to install Windows updates (again). I'm not sure where I should start to try and fix the problem. I already downloaded the malicious software tool and nothing was found. Any suggestions out there?????? Thank you in advance. Tag: I/O device error Tag: 227218
  - 2
    - Folders in "Windows Temp" I keep getting a "Cookies" "History" Temporary Internet Files" folders in my Windows /Temp folder upon restart. I can't delete them it says "being used by another program or file". I went to "Processexplor" (procexp) and it is being used but the same processes as the ones in the Documents and Settings/User/Local Settings/. I killed the "svchost" associated with it and was able to delete them. Why are these folders returning to my Windows/Temp folder every time I restart? Tag: I/O device error Tag: 227210
  - 3
    - Denied access Hello, I have been experimenting with items from the article: http://www.microsoft.com/windowsxp/using/setup/expert/northrup_restoreperf.mspx When I try to disable startup items with the System configuration utility I receive an access denied alert even though I am logged in as an admin. How does one log in as an admin user if one is already logged in as the admin user? Thanks for any assistance Tag: I/O device error Tag: 227202
  - 4
    - Daylight Savings Time Error I am running Windows XP SP2 on a duel processor AMD Motherboard (I recently upgraded to this board). My daylight savings time is off eventhough I have downloaded and ran the fix (kb933360). I try to re-run it and I get an error that the program or a newer program is already installed. To spite all of this, my computer will not shift to DST. Yes, I have checked the box to automatically switch to Daylight Savings Time. If I advance the date from March to April, then Daylight Savings time kicks in. It is off my a month. I can not find any other hotfixes or downloads to correct this problem. My system worked fine last yeat. HELP PLEASE, I'M GOING NUTS!!!! -- Greg Tag: I/O device error Tag: 227201
  - 5
    - Have Service Inherit Environment Variables from Command Prompt Window Hello everyone. I am attempting start a service and have it respect environment variable changes that I have made in the current Command Prompt window's environment. Basically, I want to do this... C:\> set FOO=BAR C:\> net start MYSERVICE ...and have MYSERVICE see FOO=BAR in its environment variables. I used Process Explorer to examine the Properties of the MYSERVICE service and found that its environment variables did not include my (modified) FOO environment variable. How might this be accomplished? Tag: I/O device error Tag: 227200
  - 6
    - Unable to delete read-only folder - access denied Hi, I've been trying to remove quite a few (>10) read-only folders & their subfolders by following the workaround instructions found at http://support.microsoft.com/kb/256614, but I'm still unable to remove the folders. I created a new registry key UseSystemForSystemFolders and modified the new value to Type 1 in Registry Editor. Then I tried to use the attrib command prompt to change the read-only attribute by using attrib -r +s C:\V\Vids. But it says Access denied. What else can I do to get rid of these folders? Someone please help me out, thanks very much in advance! Sincerely, Regine Tag: I/O device error Tag: 227193
  - 7
    - Defrag. not running I noticed my defrag not running and tried to manually begin, after it analyzed c: drive an error message appeared that said " Defragmentation of (C:) has been aborted due to inconsitancies that were detected in the file system. Run CHKDSK or SCANDISK on (C:) to repair these inconsistancies then run defrag. again. I did run Check Disk but when I ran defrag again I recieved the same message. I tried to locate SCNDSK but couldn't find it, if needed where can I download the program, or what are my options. Tag: I/O device error Tag: 227191
  - 8
    - NO_MORE_IRP_STACK_LOCATIONS ??? i have two Xseries 226 servers loaded w/ win3k sp1 with oracle RAC the customer had Mcafee Ent v8.0 and was working fine; he then installed v8.5 and the game started... NO_MORE_IRP_STACK_LOCATIONS on blue screen after i logon a KB stated hat this is a microsoft error and it is solved by applyin the latest service pack and replacing a mup.sys file. all that was done... but still i get the sme error (bsod).i can only use windows in safe mode; but still i can't uninstall Mcafee and can't stop/disable the services running to it. my nest step is windows repair. please reply on this.. thanks Tag: I/O device error Tag: 227183
  - 9
    - After using Add/Remove, now system won't boot properly Someone I know who has a Windows XP Pro desktop computer has AOL running on it with McAfee Firewall (which is apparently tied in with the AOL). Recently, because of some access problem, the McAfee Firewall had been set to "Allow All". (There are three settings, "Allow All" programs to access the internet, "Filter" (selectively allow some but not others), and "Allow None"). Later, it was decided that "Allow All" would be too hazardous and that it should be set instead to "Filter". After this was done, it was discovered that no internet access at all was occurring. When the McAfee Firewall icon was launched, a pop-up window would say something like "Would you like to turn on the McAfee firewall service? Yes/No". When "Yes" was clicked, the box would vanish but reappear about three seconds later. When "Yes" was clicked again, the box would again vanish only to reappear about three seconds later. So there was apparently some infinite loop, and the only way to dismiss the box was to click on "No". But of course, this meant still no internet access. (The DSL internet line, by the way, was OK. If we plugged it into an alternate computer, we were able to access the internet just fine). Then we had the idea of uninstalling the McAfee Firewall. We went into the Control Panel Add/Remove Programs and specifed uninstall of the McAfee Firewall as well as a few Windows Live programs. When we restarted the computer, the bootup process got to the point of displaying the blank desktop with its textured background and was about to place the program icons on it but didn't actually get to that point. It instead just displayed the blank desktop and that was it. (There was no taskbar at the bottom of the screen and therefore no Start Menu button). There was a mouse arrow which would move if the mouse was moved (but there was nothing on the desktop to click on). If we did Ctrl+Alt+Del, a Task Manager would eventually appear after some long delay, but when we clicked on "Shut Down", a box came up saying "Ending EXPLORER" but it didn't complete and we had to click on "End Task", which left us still on the blank desktop. We were able to shut off the computer only by pressing the power button and holding it in for about 10 seconds. We then tried booting up in Safe Mode with Networking. Similar to before, the black desktop was displayed with nothing on it except the "Safe Mode" captions along the edges of the desktop, but no program icons on it and no taskbar at the bottom of the screen. As before, the only way to turn off the computer was to press and hold the power button for about 10 seconds. I'd normally think of running System Restore, but how would I do that under these circumstances? If I knew the .exe name and path of System Restore, I could try to run it from the Task Manager's "New Task (Run)". Does anyone know the .exe name and path of System Restore? Does anyone know what else could be done? ... Tag: I/O device error Tag: 227181
  - 10
    - XP Backup - All Network Devices/Files Greyed Out I have been running XP Backup for several years. It has been backing up My Documents from several XP and Vista boxes on my network. I did a Full backup and then Incremental backups each night. Every few months I redo the Full backup and restart the process. This week I added a new box to the network, went to XP backup to change folders that were being backed up. Well, much to my surprise backup could not longer see any of the devices on the network. All network computers are greyed out and you cannot even open them to see the drives, folders, etc. All of the folders to be backed up are shared and can be seen for the system running backup. I have not been able to find any solutions to this problem. Help. Tag: I/O device error Tag: 227179
  - 11
    - Windows XP frozen and safe mode freezes also-have unsaved files! H Hello! I have Windows XP 2005 Media version and I use AVG for virus protection. My computer is approx 18 months old and under warranty but I am not getting any help over the phone and that is all they are offering at this point. I have files saved on my computer that I had not backed up and do need to recover if I at all can. I have a flash drive ready to do that! Trust me when I say I have learned my lesson and I don't plan to save anything directly on my computer. I will use CDs and Flash Drives to maintain my files for when I need them. My computer was working fine until approx 1 week ago. When I turned on my computer, it froze (locked) up. I was able at one point during the day to get the computer to let me open up in safe mode. I performed Check Disk and it told me that the volume in C was dirty. It proceeded on to check the rest of the disk. However, when it completes and goes to the log in page and I clik on my icon, the system freezes up. Now I cannot even open up in safe mode as it freezes (locks) up in safe mode as well. Today,I called Dell as my computer is still under warranty, and was told she could help me to do a system retore and I would lose all of my files, etc. She advised that first I contact a local repair person to get them to help me to back up my files and then call her back to complete the system restore. I couln't get any other info or help and ended the phone call more confused and stressed. I have many files that I have not backed up on any other source and I know I should have done so all along. I have been able to do the F12 and all the tests pass. If I do F8 and go to prev safe configuration it will bring up the sign in page, but freezes up when I click on the icon and try to input my password. What is causing this? Is my drive corrupted? How can I fix this without losing all my files? I need my computer desparately and need your help even more. I opened the computer and cleaned it out. It still freezes up. I am at a loss and desperately need help! I am not very computer illiterate when it comes to the this type of technical part of a computer. I follow directions well and am eager for some help to get my computer fixed soon! I hope I have given enough info for someone to be able to help me fix my computer if at all possible! MsGiraffe Louisville, KY Tag: I/O device error Tag: 227169
  - 12
    - The young golfer from Wales believes "Discipline is definitely The young golfer from Wales believes "Discipline is definitely learned and gets better with practice." Doctors and scientists said that breaking the four-minute mile was impossible, that one would die in the attempt. Thus, when I got up from the track after collapsing at the finish line, I figured I was dead. http://shenrilaa.googlepages.com/ Tag: I/O device error Tag: 227158
  - 13
    - disk cleanup - how do I restore the changes made? Help! While doing a disk cleanup, I checked only the files that disk cleanup suggested were safe to do. Once I started it it however the following exact message appeared: "Files that are required by Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your now." Assuming they meant the Windows XP disk that came with my HP laptop (an upgrade disk) I inserted that. I was told that the cd I inserted was the wrong cd. That was the only cd HP shipped with my computer almost a year ago! Can someone PLEASE tell me how to restore the files that Disk Cleanup cleaned without using that disk? Tag: I/O device error Tag: 227157
  - 14
    - Is that normal... Hi My PC (2GHz, 256MB RAM) took 62 minutes to copy a 25GB backup file from a network shared drive to a local hard disk. Is it the normal speed of XP? I have 2 Servers, 1 DC and 2 file server, Trend Micro Office Scan server, SQL Server and Exchange. SF Tag: I/O device error Tag: 227156
  - 15
    - logs There is no log files folder in C:\WINDOWS\SYSTEM32\ What sort(s) of logs should there be? I'm hoping to generate & retrieve WMI trace logs. OS=XP Home+SP2, pre-installed on Acer Notebook with malfunctioning esettings.exe Tag: I/O device error Tag: 227154
  - 16
    - Task Manager Is there a way to "turn off" some or all of the items in "Processes". Not just End Process, but turn them off for good. Also, my taskbar is getting full of items I do not need to have "on" when I start my computer. Some of the items do not have property menu to trun them off or remove remove them. Thanks Tag: I/O device error Tag: 227149
  - 17
    - disk cleanup disk cleanup shows debug dump files 260,688 K for the first time ever. What is this and is it safe to delete these files? -- viv Tag: I/O device error Tag: 227144
  - 18
    - BCMWLTRY.EXE - Ordinal Not Found Error box pops up when booted and will not go away. It says "The Ordinal 968 could not be locatedi n the dynamic link library LIBEAY32.dll. Is there a solution for this? So far it has not interferred with the performance of the pc. Tag: I/O device error Tag: 227142
  - 19
    - cannot restore problem xp home sp2 and up to date. windows defender, spybot, spyware blaster, spysweeper for msn, avg anti-virus, pest patrol, zone alarm and i bet some others i am forgetting. ive been having problems with programs that are slow to start. my desktop has also been slow to boot occasionally but mainly it has been my image editing program that ive never had a problem with before, has been freezing up when starting and forcing me to manually shut down windows and reinstall the program over and over. i decided to try to do a system restore to see if that could solve this problem since ive only been having this problem for a few weeks. system restore would only allow me to go back to dec 07. i dont know why but i set it for that date and proceeded. windows rebooted and my desktop appeared and restore said it did not/could not restore to that date. i tried another date and the same thing happened. ive scanned my computer for malware with every program i have but i have found nothing. any suggestions? thanx in advance. Tag: I/O device error Tag: 227141
  - 20
    - BSOD I'm recieving an error message that seems without solution. I have a Toshiba Tecra A4 notebook, my OS is winxp professional SP2. I'm recieving stop error messages suddenly. The first stop error : code 1000007e, P1 c0000005,P2 806ed134, P3 f7ba9c28, P4 f7bd9924 The second error: code 1000008e,P1 c0000005, P2 a88e4739, P3 a8e5fb70, P4 00000000 Can anyone help since there is nothin written on the microsoft site concerning this error?? Tag: I/O device error Tag: 227138
  - 21
    - bsod Hi, I have just recently started getting blue screen errors on my laptop. It seems to happen randomly. First time I recall it happening was while trying to defrag the HD. I know it also happened while Scandisk and WMPlayer were working. This is the error I get. IRQL_NOT_LESS_OR_EQUAL ***STOP: 0X0000000A (0X96B266CC, 0X00000002, 0X00000000, 0X804DA6DB) Thanks for any helpful advice. DC Tag: I/O device error Tag: 227131
  - 22
    - Page File with 20,000+ fragments Windows XP Sp2 with patches. I just ran disk defragmenter. Afterwards, I analyzed again. It reports that my PageFile has more than 20,000 pieces. I'd really like PageFile to be in one contiguous section. How can I do that? Lady Dungeness Crabby, but Great Legs! ~~~~~~~~~~~~~~~~~~~~~~~ Tag: I/O device error Tag: 227129
  - 23
    - Putting computer on Standby I am repeatedly getting the following message when I attempt to put the computer screen on standby. "Power Management Windows cannot go on Standby because Internet Explorer has experienced an error that requires your attention. You must complete all dialog boxes related to the error before you can put the computer on standby." I don't know what action to take or where and do not know what dialog boxes are being referred to. Please advise a solution to this problem. Many thanks. My computer is a 4100 Dimension Desktop with Windows XP - Home Edition - Service Pack 2 operating system, Pentium 111 processor at 930 MHZ, 20 GB Hard Drive and 256 MB of RAM. The system is FAT 32. The Internet Explorer version is #7 and my antivirus protection is Norton AntiVirus 2008. Stewart Fluney -- Stewart Fluney Tag: I/O device error Tag: 227123
  - 24
    - Putting computer on Standby -- Stewart Fluney Tag: I/O device error Tag: 227122
  - 25
    - System repair/restore a couple of weeks ago i had my computer repaired, which was great but i had my safty net "goback" (norton) removed, a couple of days later i had a problem after loading some music software of the internet. eg music started play from a radio station through my speaker.. Anyway i did a system restore & i am in real mess, looks like i have lost all my Itunes music, internet access/Email, although there if i reset up every time i use the PC. The main problem appear to be that although i have manage to restore back to the day/time i restored. i appear to have lost alot of data & unable to keep my setting i have set....any help weclome -- Regards Tony Tag: I/O device error Tag: 227121
- Next
  - 1
    - Opening Local Drives Hello Please can you help with the following: When I try to open the local drives I get the "Open With" box which wants me to select which problem to openthe local drive with. This only occures with the local hard disks. The network, optical and removal drive works fine. Tag: I/O device error Tag: 227114
  - 2
    - Slow and Jerky Video My computer has slow and jerky video when download youtube videos and other streaming videos. I am not seeming to have problems with surfing or other internet operations. I have an Inspiron 6000. Max. out on memory Tag: I/O device error Tag: 227113
  - 3
    - Internet Explorer 7 Since I renewed my subscription to Norton AntiVirus, I've had difficulty loading up Microsoft's Internelt Explorer 7. I downloaded Norton AntiVirus 2008 on Feb. 27 and am wondering if it is possibly incompatible in some way or my system needs upgading to meet its requirements. I have a Dell Dimension 4100 Desktop computer with Windows XP - Home Edition, Service Pack 2 operating system, Pentium 111 processor at 930 MHZ, 20 GB Hard Drive and 256 MB of RAM. The file system is FAT 32. Could you advise me how to correct this situation? Many thanks for your response and advice. Stewart Fluney -- Stewart Fluney Tag: I/O device error Tag: 227108
  - 4
    - http://sensico.wordpress.com/ http://sensico.wordpress.com/ Tag: I/O device error Tag: 227106
  - 5
    - dvdr reading I have a computer which dual boots vista and xp. On vista I access any dvd-r I burn, but on xp I cannot access any. Either comes up with message cannot recognise file system or explorer show blank file list I have check upper and lower filters If I use a commercial DVD that is recognised Tag: I/O device error Tag: 227090
  - 6
    - remote app launch from server share hi, i need a script that would ask for a computer name, then upon entering this, launch a app from a server on a remote users computer. I think you can do this by a batch file but i am not sure. How do i do this? psexec and other exe's i cannot use for security reasons. thanks Tag: I/O device error Tag: 227088
  - 7
    - right-clicking desktop icon causes crash hi can someone please help. everything works except when i right click on a desktop icon (except my own made folders) my system crashs. it then comes up the usual message it has to shut down and the dr debug has to shut down. has anyone got any ideas please. ps cant detect any virus and mouse is ok. thanks -- judguy Tag: I/O device error Tag: 227083
  - 8
    - Drive sharing/mapping Hi All, This is driving me nuts. I got a new machine, call it B. I want to get a bunch of files off of the old machine, call it A. A only has a C: drive. I set both machines up with the same user ID and password. Both are members of WORKGROUP. Both of these machines are at home and are connected to the same router. A used to be on a domain but I removed it. I shared the C: drive on A as net share cdrive=c:\. That succeeds. I can use the share from B as net use g: \\A\cdrive. That also succeeds. Now, on B, I can dir g:\ and see all of the foldeers on A - but strangely, no files. If I try a dir g:\afolder, I get access denied. I've been doing this sort of stuff for years and can't figure our what's wrong here. Thanks for any help, - Arnie Tag: I/O device error Tag: 227077
  - 9
    - XP performance deteriorating I've been (or rather my main development workstation has been) suffering from a constantly degrading performance for about a year now. It's as if performace decreases with 5 to 10% each month. I primarily use Visual Studio 2005 on this machine. I have an additional "backup" VS2005 setup in a VMWare virtual PC on an external (USB) harddisk as well, where I keep copies of my sources in case something goes wrong with the "real" machine. Both setups are XP SP2, both current with updates, etc.. Now the funny thing is, you would expect that on the same hardware, the "real" instance of Visual Studio would run (at least) slightly better than the one in the virtual machine. Exactly the opposite is true here on my system: VStudio runs almost THREE TIMES faster in the virtual machine than it does directly on the host. Starting Visual Studio on the host takes 65 seconds (worst case, it's much faster when it has already been run and all files are still boing cached). Starting it in the virtual machine takes 20 to 25 seconds, under the same conditions (actually, the time of 25 seconds was measured immediately after a "cold boot" of the VM, and of course the VM's virtual harddisk wasn't being cached in RAM by the real OS because it hadn't been run yet). The host has a single core 3.2 GHz processor with hyperthreading and 2GB of RAM, and nothing else is running when VS is started there that isn't also running when VS is started in the VM. The virtual machine is configured with 512M of RAM, and runs on the same hardware for the rest (except it's physically on an external USB disk, versus internal SATA in the other case). Tag: I/O device error Tag: 227061
  - 10
    - Problem after undoing restoration I did a system restore, but it didn't solve the prblem, so I undid the restoration. Now I can't use any restore points at all, even points created after the restore/undo operation. I've read a few threads that this can possibly be fixed by turning the service off and restarting it, but I really want to get back to an earlier date. Is there any other fix that will preserve existing restore points? Thanks. Tag: I/O device error Tag: 227060
  - 11
    - XP bad Windows XP barely runs after installing SP2 and the 72 windows updates that went along with it. I have been attempting to install SP2 for the last 2 years with the same results. I always assumed it was because of a lack of RAM (I had 1GB) and lack of disk space (my C drive is at 50% capacity). When I run a system restore, my computer still lags a little bit, but is fully functional. After installing SP2 it is mostly unusable. I am running and/or have installed the following since the SP2 install with no apparent difference in performance: WinXP Home v.2002 Pentium 4 2.8GHz 2GB Ram (I just added 1GB)(when I go to system properties, it does not always show this information. It reads: Computer: [Blank space]. C drive shows at least 50% free space Zone Alarm Pro w/up to date definitions IE7 firewall enabled Updated BIOS Updated DivX controls HD Tune showed no major problems Ad Aware full scan in both normal and Safe Mode showed no problems As recommended by DataDoctors: SpywareGuard and SpywareBlaster System Mechanic showed no major issues that were left unresolved Running a Seagate 750GB USB ext. HD (I have run the above without it with no apparent change in performance). Processor Explorer does not show me anything obvious (although I probably wouldnâ??t know if it did) Task Manager: Peak Memory of top 6: 108552 99820 87106 77116 62200 55948 Virtual Memory of top 6: 77444 69344 37444 35852 35176 23028 Commit Charge: 665812 Limit:4037452 Peak: 1666456 The CPU usage seems to spike a lot, but even when it is barely in use, the computer hangs or freezes for no apparent reason. It seems there are a lot of add-ons in my IE7 so I disabled 3 of the 4 toolbars I had loaded. Performed diskcleanup in both normal and safe modes. Ran Defrag in both â?? â?? Here is a snapshot of the analysis prior to defrag: Volume (C:) Volume size = 112 GB Cluster size = 4 KB Used space = 55.14 GB Free space = 56.59 GB Percent free space = 50 % Volume fragmentation Total fragmentation = 13 % File fragmentation = 26 % Free space fragmentation = 1 % File fragmentation Total files = 152,829 Average file size = 512 KB Total fragmented files = 20,625 Total excess fragments = 209,737 Average fragments per file = 2.37 Pagefile fragmentation Pagefile size = 2.00 GB Total fragments = 15 Folder fragmentation Total folders = 15,345 Fragmented folders = 116 Excess folder fragments = 1,951 Master File Table (MFT) fragmentation Total MFT size = 169 MB MFT record count = 169,921 Percent MFT in use = 98 % Total MFT fragments = 3 -------------------------------------------------------------------------------- Fragments File Size Most fragmented files 12,934 1.52 GB \Documents and Settings\Geoffrey Moler\Local Settings\Application Data\Google\Google Desktop Search\rpm.cf1 1,540 96 MB \Documents and Settings\Geoffrey Moler\My Documents\My Pictures\SCANS\2005-03-07\Color.BMP 486 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1656\snapshot\_REGISTRY_MACHINE_SOFTWARE 486 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1655\snapshot\_REGISTRY_MACHINE_SOFTWARE 486 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1657\snapshot\_REGISTRY_MACHINE_SOFTWARE 486 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1651\snapshot\_REGISTRY_MACHINE_SOFTWARE 486 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1660\snapshot\_REGISTRY_MACHINE_SOFTWARE 486 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1654\snapshot\_REGISTRY_MACHINE_SOFTWARE 486 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1653\snapshot\_REGISTRY_MACHINE_SOFTWARE 486 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1652\snapshot\_REGISTRY_MACHINE_SOFTWARE 486 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1659\snapshot\_REGISTRY_MACHINE_SOFTWARE 486 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1658\snapshot\_REGISTRY_MACHINE_SOFTWARE 485 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1649\snapshot\_REGISTRY_MACHINE_SOFTWARE 485 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1650\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1644\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1641\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1634\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1633\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1638\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1643\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1642\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1636\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1640\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1623\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1624\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1631\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1637\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1639\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1617\snapshot\_REGISTRY_MACHINE_SOFTWARE 480 30 MB \System Volume Information\_restore{11B4CBB0-31B0-483C-A4FE-D6E9E8C1A928}\RP1601\snapshot\_REGISTRY_MACHINE_SOFTWARE I see that most solutions tend to point to malware, but in my case that just does not seem to make sense since I can restore to pre-SP2 and everything is relatively OK. Computer works fine in Safe Mode. I am a little unclear about when I should change my system restore settings and how I can delete old ones without wiping all of them out. Thank you for any help! Tag: I/O device error Tag: 227046
  - 12
    - Looking for Windows backup prog with a catch I am looking for a backup program for Windows XP that can back up mapped network drives to a physically attached tape library. There are some catches: - it must be able to perform incremental backups - the built-in backup program can, but it doesn't seem to consider date/time stamp, thus incremental backups really become fulls - no special service, agent, or other software to be installed on the hosts to be mounted and backed up - the backup program must be self- contained, as is the built-in Win XP backup program. Thanks for any leads. Tag: I/O device error Tag: 227045
  - 13
    - Win XP requests Activation with no hardware change....Help Win XP Pro SP2. Retail package. A week ago I had a motherboard fail and eventually got it all working again with all new bits. It asked naturally for activation and I did this in a few seconds over the internet. The last week has been spent getting everthing sorted and a few hours ago I disconected my Lan card in the Bios to check something. On re boot, XP requested activation although the computer case was not opened. Now what do I do.......I don't want to activate online and use up my numbers in case they are needed in the future. David ******************************* Tag: I/O device error Tag: 227042
  - 14
    - missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SOFTWARE As the subject says, this was the error message I was being shown when my computer failed to load. I went and brought a new hard drive to help solve the problem. I installed XP on the new hard drive and updated it and so on, I then connected the old hard drive as a slave to see if I could retrieve my files. The problem I'm having is that I cant open my old user folder, its says access denied. I think its because I had a password and made my folders private. Is there any way around this? I really need to retrieve all my old files and documents. I had a look on here and searched for "hive file missing" and made it to this page: http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3B307545 I followed what it said so that I could use Guided Help on another computer (my old hard drive). To try and get it up and running again so I could gain access to my files. I saved everything to a flash drive so that I could use it in the recovery console. Basically, I've made it as far as running the "batch regcopy1.txt" file and then restarted the computer. It said to log on as the administrator and run the Guided Help.exe file. The problem is I cant log on as the admin, its created a new user called Owner and I cant run anything. Can anyone help me out with this? Is it possible to remove the Owner account so that I can log in with my original one? Or is it possible to gain access to my old user folder whilst using the hard drive as a slave? Thank you! Tag: I/O device error Tag: 226982
  - 15
    - How to make registry edits for environmen vars w/out requiring log Is there a way, a command line method, to force edits to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment to be recognized? I have a created a .reg file after installing and configuring a WinXP app to a NAS filer that essentially setups up two environment variables. My intention is to enable end users to configure their PCs to make use of that application, with minimal intervention and to do so by allowing them to setup their environment variables via the .reg file, after a minor copy of shortcuts to the start menu programs area. The additional entries within the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment are not immediately recognized and seem to require the end user to either logout or open system properties > advanced tab > Environment Variables Button> <OK> for the environment to be setup and those variables recognized. Tag: I/O device error Tag: 226972
  - 16
    - System froze up - Windows XP need help, please!! Hello! My computer was working fine until yesterday morning. When I turned on my computer, it froze (locked) up. I was able at one point during the day to get the computer to let me open up in safe mode. I performed Check Disk and it told me that the volume in C was dirty. It proceeded on to check the rest of the disk. However, when it completes and goes to the log in page and I clik on my icon, the system freezes up. Now I cannot even open up in safe mode as it freezes (locks) up in safe mode as well. Today,I called Dell as my computer is still under warranty, and was told she could help me to do a system retore and I would lose all of my files, etc. She advised that first I contact a local repair person to get them to help me to back up my files and then call her back to complete the system restore. I couln't get any other info or help and ended the phone call more confused and stressed. I have many files that I have not backed up on any other source and I know I should have done so all along. Is this a virus or what? How can I fix this without losing all my files? I need my computer desparately and need your help even more. I saw a post from Gerry in January and am wondering if this is how to fix my computer. If so, how do I get the computer to stay open long enough to get started. Do I need to open the computer and see if it needs to be cleaned out? Is it ppossible that is any part of the problem? I am not computer illiterate totally but I am when it comes to the technical part of a computer. I follow directions well and am eager for some help to get my computer fixed soon! MsGiraffe Louisville, KY Tag: I/O device error Tag: 226969
  - 17
    - Repairing XP Media Center Edition with an XP home SP2 disc? Safe? I have a notebook that came pre-loaded with MCE and that is now starting to cause me problems (blue screen, various errors, etc.) I had these problems a few months back and was able to simply do a system restore to solve the problem, this time however, I cannot restore (all of my system restore points prior to the middle of last month have disappeared). My dvd-r drive will not recognize cd or dvd-r media properly (I have avi's saved that it won't pick up at all), my user accounts except for the administrator account have disappeared and when I try to remove them they aren't listed. When I try to re-create them, MCE tells me they already exist. Unfortunately I don't have the installation disc for this system. I do have a XP home disc that came with my desktop pc. Can I use this disc to perform a repair for MCE without any problems for my system? Also, I was thinking of partitioning my drive and just installing XP Home because I cannot use MCE with my pro-audio applications. If I do this how do I select which OS to use and is this safe as well? Tag: I/O device error Tag: 226967
  - 18
    - System Restore and itunes problems I have had trouble downloading new version of itunes. I keep getting a message that I am unable to remove old version of quicktime. I have completely removed itunes to see if that works, and now I can't get itunes at all. I have tried to do a system restore but my system restore now doesn't work either. Can anyone help? Tag: I/O device error Tag: 226965
  - 19
    - Windows XP MCE 2005 System Locked Up-Help Please! Hello! My computer was working fine until yesterday morning. When I turned on my computer, it froze (locked) up. I was able at one point during the day to get the computer to let me open up in safe mode. I performed Check Disk and it told me that the volume in C was dirty. It proceeded on to check the rest of the disk. However, when it completes and goes to the log in page and I clik on my icon, the system freezes up. Now I cannot even open up in safe mode as it freezes (locks) up in safe mode as well. Today,I called Dell as my computer is still under warranty, and was told she could help me to do a system retore and I would lose all of my files, etc. She advised that first I contact a local repair person to get them to help me to back up my files and then call her back to complete the system restore. I couln't get any other info or help and ended the phone call more confused and stressed. I have many files that I have not backed up on any other source and I know I should have done so all along. Is this a virus or what? How can I fix this without losing all my files? I need my computer desparately and need your help even more. I saw a post from Gerry in January and am wondering if this is how to fix my computer. If so, how do I get the computer to stay open long enough to get started. Do I need to open the computer and see if it needs to be cleaned out? Is it ppossible that is any part of the problem? I am not computer illiterate totally but I am when it comes to the technical part of a computer. I follow directions well and am eager for some help to get my computer fixed soon! MsGiraffe Louisville, KY Tag: I/O device error Tag: 226953
  - 20
    - system restore will not open let alone restore Hi When I click on stsyem restore nothing happens. I've scanned, cleanned and even been on other microsoft pages but non of the 5 help steps have helpped. I'm using XP media centre and my windows automatic updates are all up to date. I did read here? to turn off system restor on all the drives and just delet past restors, but how would i do that? Thanks Tag: I/O device error Tag: 226948
  - 21
    - XP Freezes after connecting to the internet Here's my problem, hoping someone can assist. I have a Dell 4600 w/ 1.5 gigs of ram, 120 Gig HD, running XP home SP2. I'm forced to connect to the internet via dialup. Lately, whenever I connect, my computer will stop responding to any request to start a new program, ie Firefox or Outlook. The computer doesn't even respond to a Ctrl Alt Del. If a program is already up and running it will continue to operate but nothing new can be opened or started. I've recently installed regcure and kasperky anti virus. I had avast on there before but wasn't happy with it. I've run the regcure and it seems like everytime I run it, things get picked up. I'm at my whit's end and am afraid the only solutioin will be a HD format. I have also run adaware and it will ocasioinally find something but I haven't run it recently. This problem has been going on since before I switched anti virus so I don't believe it to be any conflict with that. Any help is greatly appreciated. Tag: I/O device error Tag: 226946
  - 22
    - Can't defrag or run chkdsk or install updates My computer won't let me defrag because it says a scandsk is scheduled to run and to "run chkdsk /f." I can't scan disk. Also, MS security updates will download but won't install. I have Windows Live OneCare. Is there something I can do? Also, I tried to review other posts, but for some reason I can't access their answers. Tag: I/O device error Tag: 226945
  - 23
    - Startup troubleshooting info MS Technet provides rather detailed info on the XP startup process in the Resource Kit material at http://technet.microsoft.com/en-us/library/bb457123.aspx but it does not link that detailed info to the several screens that a user sees during bootup. I went all the way through the Windows Help Startup and Shutdown Troubleshooter without solving the problem, so then I just wanted good source info to at least give me solid clues as to where the boot process was failing. (Hence the Resource Kit material.) To be specific, startup gets to the Windows splash screen and then to a black screen where it stops responding and hangs. I have the additional clues that I can start in Safe Mode or Safe Mode with Networking, and that in Safe Mode I can generate a boot log, but when trying to start in Normal Mode I cannot generate a boot log. I also cannot start in Diagnostic Mode (the most restricted mode provided by MSCONFIG). CHKDSK with surface scan is clean. Can anyone correlate these details to the startup phase where it's failing? A related question: When a computer will start in Safe Mode with Networking, but will not start with all devices disabled that offer the option and with Diagnostic Mode selected -- that should leave a limited number of issues to look at. If so, anyone know what they are? I've never used Debugging Mode (requires some sort of a special setup with another computer) -- would it provide fuller detail about a startup failure? John Hupp PRP Company Tag: I/O device error Tag: 226943
  - 24
    - help with crashes Hi. Can anyone help please? My pc keeps crashing. I can't do a virus scan as it crashes halfway through. I've been told that I can do a virus scan some other way but don't know how to. My son reckons the PC overheats. Is this possibly the cause? Sometimes I can leave it switched on all day & it's OK just doing a bit of surfing,but as soon as we try to download music, disc clean up, watch videos, virus scan & larger jobs like these, it crashes. We seem to have plenty of space left. I hope someone can help me. Thanks. Tag: I/O device error Tag: 226939
  - 25
    - Slow Computer I am trying to speed up my computer because as of right now, it takes atleast 1-2 minutes for programs to load, especially the internet. I have deleted unnecessary programs (some of which I can delete for who knows why), I have defragmented my computer, etc. First off, what do I need to do to make my computer the speed it should be? And lastly, how do I delete programs that won't let me delete them? Tag: I/O device error Tag: 226932

My drive will play audio and data cd's, but when i place a dvd movie says
'unable to perform function due to an I/O device error", anyone has a
solution to this problem, I have a toshiba qosmio!

Top

Re: I/O device error by Leonard

Leonard
Fri Mar 14 06:27:17 PDT 2008

http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

---
Leonard Grey
Errare humanum est

Freddy wrote:
> My drive will play audio and data cd's, but when i place a dvd movie says
> 'unable to perform function due to an I/O device error", anyone has a
> solution to this problem, I have a toshiba qosmio!

Top