Sysvol location

Tutorials Win: Microsoft Windows Forum

- Previous
 - 1
 - Telephone section not visible via SEARCH, FOR PEOPLE I am using Window XP, on START, SEARCH, FOR PEOPLE, it only show some of the Active Directory information. Are there anyway to show the TELEPHONE section of Active Directory and allow me to update the 'mobile phone' information ? I am expecting the telephone information will flow onto Exchange which when I pull up the GAL, mobile phone information will be there eventually. Any comment and advice most appreciated. KL Tag: Sysvol location Tag: 176213
 - 2
 - Error in LDAP Service. Help! Two messages are reported in the Event Viewer when I reboot my W2K Server: 1. The server failed to start due to an initialization error. Verify the configuration. Error description is: GetLastError()=997 : CreateAccount for Anonymous users. 2. Site Server LDAP Service cannot initialize the following object: GetLastError()=997 : Init LdapExtension. Then, the NetLogong service does not start automaticaly. Anyone can help? Thanks much, Leonardo Tag: Sysvol location Tag: 176209
 - 3
 - Security Group not giving users access Here is my basic setup... I have a folder created for all departments in my organization. These folders are not shared. I have created a security group named after the folder. (ex. sales folder access) I then give full rights to this security group. I then place users in the group. For some reason this does not give them access to the folder. I have to give each user rights to the folder before it will work. Any ideas? Tag: Sysvol location Tag: 176202
 - 4
 - Default Access Permissions to Active Directory All, what is the default permission to active directory or where can I look to find? Right now, any and all people in our IT Department can access Access Directory after installing the Admin Pak. Your help is appreciated. Tag: Sysvol location Tag: 176201
 - 5
 - DC Restore I had a problem about 2 weeks ago. I had 2 of 4 hard drives fail on my RAID 5 volume. I also did not have any spares for replacement so I had to wait a few days. The server is a second DC in this building, but one of 5 in my enviroment. I had decent backups of the server. When I recieved the drives I installed them, installed Windows 2000 Server and then did a restore from tape. This was at least 5 days after the failure. Now that the server is restored I have issues with clients connecting to shares regarding authentication. I have loads of errors in the event log regardign directory communication. I have tried doing a dcpromo and the authentication fails there as well. Is there something that I can do to resolve this issue? Tag: Sysvol location Tag: 176200
 - 6
 - Pls help!! Problem of Rebuilding indices of Active Didectory Hi all I have a problem after installed SP2 for Windows server 2003, it always prompt "The Active directory is rebuilding indices" too long time when server starting up and show "SAM failed start the to TCP/IP or SPX/IPX litening thread" in system log. And I cannot ping this server from other PC and can ping other PC on this server, Anyone can tell me why and how to fixed it? thx very much for helping. Rgds Alan Tag: Sysvol location Tag: 176190
 - 7
 - Search Distribution list owner Hi, We have a situation where one of the users have left the organisation and he used to be the manager for quite a number of Distribution lists. These distribution lists are part of different OUs, and we do not have a master list of the DLs he owned. Now, we would need to find out the diffferent DLs that he was the owner of and get that changed to a different owner. The challenge here is, there are close to 10000 DLs across the company and to make things worse, this employees account has now been deleted from AD. Thanks, Jai -- cooljai ------------------------------------------------------------------------ cooljai's Profile: http://forums.techarena.in/member.php?userid=36607 View this thread: http://forums.techarena.in/showthread.php?t=865411 http://forums.techarena.in Tag: Sysvol location Tag: 176189
 - 8
 - Add New Computer Object With VBS Hey All! When creating a new computer object, we change the 'users/group can join this computer to a domain' option from 'Domain Admins' to 'Authenticated Users'. I'm trying to accomplish it with a script as shown below. If I leave out the defaultgroup line, the object gets created. When run with the defaultgroup I get an error - a constraint violation occurred. Am I using the correct attribute ('defaultGroup') to accomplish this and if so how do I fix it? If not, which attribute do I use? Thanks GHG Set objComputer = objContainer.Create("Computer", "cn=" & strComputer) objComputer.Put "sAMAccountName", strComputer & "$" objComputer.Put "Description", strDescription >> objComputer.Put "defaultGroup", "Authenticated Users" << objComputer.Put "userAccountControl", 4096 objComputer.SetInfo Tag: Sysvol location Tag: 176183
 - 9
 - Possible breach Is there a way to see if someone added a user account to our active directory that dows not show in ADUC? Tag: Sysvol location Tag: 176178
 - 10
 - User cannot change password - Resets itself. Hi, When I tick the user cannot change password attribute for different accounts in AD the option seems to reset itself after about 5 minutes. Does anyone have any ideas how I can fix this? Thanks, Tag: Sysvol location Tag: 176176
 - 11
 - LED slim light box boost up your Christmas Day Advertisement Edlite Slim Light Boxes are the latest technology in lighting. To enable the light box to be so slim-line we use LED lamp & pencil thin fluorescent tubes. We have much confidence in our product. For CCFL series,they are our mature product,the crystal ED-P & ED-DP are the most salable ones.The transparence is the most selling point. For EEFL series,they are the growing product.In past,some EEFL slim light box have met a problem,the pressure is not so steady,now,we have deal with the problem.Now,the steady pressure ,and the big size ,the low current are the selling point of our EEFL slim light box. And the most salable series is the LED slim light box,the supper slim,only 11~20 mm thickness.The supper slim outlook & the Maintenance- free are the selling point. More detail,please mail:jenny@edlite.hk. Tag: Sysvol location Tag: 176165
 - 12
 - LED slim light box boost up your Christmas Day Advertisement Edlite Slim Light Boxes are the latest technology in lighting. To enable the light box to be so slim-line we use LED lamp & pencil thin fluorescent tubes. We have much confidence in our product. For CCFL series,they are our mature product,the crystal ED-P & ED-DP are the most salable ones.The transparence is the most selling point. For EEFL series,they are the growing product.In past,some EEFL slim light box have met a problem,the pressure is not so steady,now,we have deal with the problem.Now,the steady pressure ,and the big size ,the low current are the selling point of our EEFL slim light box. And the most salable series is the LED slim light box,the supper slim,only 11~20 mm thickness.The supper slim outlook & the Maintenance- free are the selling point. More detail,please mail:jenny@edlite.hk. Tag: Sysvol location Tag: 176164
 - 13
 - Compare Users in AD and Novell I have a Win2000 Server running Active DIrectory and another system running Netware 5.1. I have a problem of identifying users that are deleted as the system admin for novell might delete a user but did not inform the Active Directory side that the user has been deleted. Have read about the MSDSS but was wondering if there is any way i can just do a "report" that says user a , b , c was found in AD but not in Novell? In this case, i can re-verify that the the user a,b,c can be safely deleted in AD. Please advice. Cheers! Darence Tag: Sysvol location Tag: 176154
 - 14
 - Unable to local DC ......... URGENT Hi, Urgently need solutions for the following error. Originally I have 2 DCs. Due to the fact that one of them have problem, so it was reformatted and promote as a 2nd DC again. I log in to windows as Adminsitrator user. Now I have many errors: (1.) On the new 2nd DC, i have error in system log every 2 min, Evend ID 16650 from source SAM stating "The account-identifier allocator failed to initialize properly. The record data contains the NT error code that caused the failure. Windows 2000 will retry the initialization until it succeeds; until that time, account creation will be denied on this Domain Controller. Please look for other SAM event logs that may indicate the exact reason for the failure." (2.) On both DCs, I have Event ID 3096 The Primary Domain COntroller for this domain could not be located. (3.) On both DCs, I'm also unable to open/access Domain Controller Security Policy or Domain Security Policy, error message Failed to open the Group Policy Object. You may not have appropriate rights. The specified domain either does not exist or could not be contacted. (4.) I execute DCdiag /v on the old DC, get the following Domain Controller Diagnosis Performing initial setup: * Verifying that the local machine NODE2, is a DC. * Connecting to directory service on server NODE2. * Collecting site info. * Identifying all servers. * Found 2 DC(s). Testing 1 of them. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\NODE2 Starting test: Connectivity * Active Directory LDAP Services Check * Active Directory RPC Services Check ......................... NODE2 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\NODE2 Starting test: Replications * Replications Check ......................... NODE2 passed test Replications Test omitted by user request: Topology Test omitted by user request: CutoffServers Starting test: NCSecDesc * Security Permissions Check for CN=Schema,CN=Configuration,DC=TEST,DC=com * Security Permissions Check for CN=Configuration,DC=TEST,DC=com * Security Permissions Check for DC=TEST,DC=com ......................... NODE2 passed test NCSecDesc Starting test: NetLogons * Network Logons Privileges Check ......................... NODE2 passed test NetLogons Starting test: Advertising The DC NODE2 is advertising itself as a DC and having a DS. The DC NODE2 is advertising as an LDAP server The DC NODE2 is advertising as having a writeable directory The DC NODE2 is advertising as a Key Distribution Center Warning: NODE2 is not advertising as a time server. The DS NODE2 is advertising as a GC. ......................... NODE2 failed test Advertising Starting test: KnowsOfRoleHolders Role Schema Owner = CN="NTDS Settings DEL:4fc70a1f-be5d-436a-aaef-95e986d9b6f7",CN=NODE1,CN=Servers,CN=Default-Fir st-Site-Name,CN=Sites,CN=Configuration,DC=TEST,DC=com Warning: CN="NTDS Settings DEL:4fc70a1f-be5d-436a-aaef-95e986d9b6f7",CN=NODE1,CN=Servers,CN=Default-Fir st-Site-Name,CN=Sites,CN=Configuration,DC=TEST,DC=com is the Schema Owner, but is deleted. Role Domain Owner = CN="NTDS Settings DEL:4fc70a1f-be5d-436a-aaef-95e986d9b6f7",CN=NODE1,CN=Servers,CN=Default-Fir st-Site-Name,CN=Sites,CN=Configuration,DC=TEST,DC=com Warning: CN="NTDS Settings DEL:4fc70a1f-be5d-436a-aaef-95e986d9b6f7",CN=NODE1,CN=Servers,CN=Default-Fir st-Site-Name,CN=Sites,CN=Configuration,DC=TEST,DC=com is the Domain Owner, but is deleted. Role PDC Owner = CN="NTDS Settings DEL:4fc70a1f-be5d-436a-aaef-95e986d9b6f7",CN=NODE1,CN=Servers,CN=Default-Fir st-Site-Name,CN=Sites,CN=Configuration,DC=TEST,DC=com Warning: CN="NTDS Settings DEL:4fc70a1f-be5d-436a-aaef-95e986d9b6f7",CN=NODE1,CN=Servers,CN=Default-Fir st-Site-Name,CN=Sites,CN=Configuration,DC=TEST,DC=com is the PDC Owner, but is deleted. Role Rid Owner = CN="NTDS Settings DEL:4fc70a1f-be5d-436a-aaef-95e986d9b6f7",CN=NODE1,CN=Servers,CN=Default-Fir st-Site-Name,CN=Sites,CN=Configuration,DC=TEST,DC=com Warning: CN="NTDS Settings DEL:4fc70a1f-be5d-436a-aaef-95e986d9b6f7",CN=NODE1,CN=Servers,CN=Default-Fir st-Site-Name,CN=Sites,CN=Configuration,DC=TEST,DC=com is the Rid Owner, but is deleted. Role Infrastructure Update Owner = CN="NTDS Settings DEL:4fc70a1f-be5d-436a-aaef-95e986d9b6f7",CN=NODE1,CN=Servers,CN=Default-Fir st-Site-Name,CN=Sites,CN=Configuration,DC=TEST,DC=com Warning: CN="NTDS Settings DEL:4fc70a1f-be5d-436a-aaef-95e986d9b6f7",CN=NODE1,CN=Servers,CN=Default-Fir st-Site-Name,CN=Sites,CN=Configuration,DC=TEST,DC=com is the Infrastructure Up date Owner, but is deleted. ......................... NODE2 failed test KnowsOfRoleHolders Starting test: RidManager * Available RID Pool for the Domain is 2111 to 1073741823 Warning: FSMO Role Owner is deleted. * NODE1.TEST.COM is the RID Master * DsBind with RID Master was successful * rIDAllocationPool is 1611 to 2110 * rIDNextRID: 1618 * rIDPreviousAllocationPool is 1611 to 2110 ......................... NODE2 passed test RidManager Starting test: MachineAccount * SPN found :LDAP/NODE2.TEST.COM/TEST.com * SPN found :LDAP/NODE2.TEST.COM * SPN found :LDAP/NODE2 * SPN found :LDAP/NODE2.TEST.COM/TEST * SPN found :LDAP/32158106-7989-4cff-8da4-8ff93c0e1831._msdcs.TEST.co m * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/32158106-7989-4cff-8d a4-8ff93c0e1831/TEST.com * SPN found :HOST/NODE2.TEST.COM/TEST.com * SPN found :HOST/NODE2.TEST.COM * SPN found :HOST/NODE2 * SPN found :HOST/NODE2.TEST.COM/TEST * SPN found :GC/NODE2.TEST.COM/TEST.com ......................... NODE2 passed test MachineAccount Starting test: Services * Checking Service: Dnscache * Checking Service: NtFrs * Checking Service: IsmServ * Checking Service: kdc * Checking Service: SamSs * Checking Service: LanmanServer * Checking Service: LanmanWorkstation * Checking Service: RpcSs * Checking Service: RPCLOCATOR * Checking Service: w32time w32time Service is stopped on [NODE2] * Checking Service: TrkWks * Checking Service: TrkSvr * Checking Service: NETLOGON * Checking Service: Dnscache * Checking Service: NtFrs SMTPSVC Service is stopped on [NODE2] ......................... NODE2 failed test Services Test omitted by user request: OutboundSecureChannels Starting test: ObjectsReplicated NODE2 is in domain DC=TEST,DC=com Checking for CN=NODE2,OU=Domain Controllers,DC=TEST,DC=com in dom ain DC=TEST,DC=com on 1 servers Object is up-to-date on all servers. Checking for CN=NTDS Settings,CN=NODE2,CN=Servers,CN=Default-First- Site-Name,CN=Sites,CN=Configuration,DC=TEST,DC=com in domain CN=Configuration, DC=TEST,DC=com on 1 servers Object is up-to-date on all servers. ......................... NODE2 passed test ObjectsReplicated Starting test: frssysvol * The File Replication Service Event log test The SYSVOL has been shared, and the AD is no longer prevented from starting by the File Replication Service. ......................... NODE2 passed test frssysvol Starting test: kccevent * The KCC Event log test Found no KCC errors in Directory Service Event log in the last 15 minut es. ......................... NODE2 passed test kccevent Starting test: systemlog * The System Event log test Found no errors in System Event log in the last 60 minutes. ......................... NODE2 passed test systemlog Running enterprise tests on : TEST.com Starting test: Intersite Skipping site Default-First-Site-Name, this site is outside the scope provided by the command line arguments provided. ......................... TEST.com passed test Intersite Starting test: FsmoCheck GC Name: \\NODE2.TEST.COM Locator Flags: 0xe00001bc Warning: DcGetDcName(PDC_REQUIRED) call failed, error 1355 A Primary Domain Controller could not be located. The server holding the PDC role is down. Warning: DcGetDcName(TIME_SERVER) call failed, error 1355 A Time Server could not be located. The server holding the PDC role is down. Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error 1355 A Good Time Server could not be located. KDC Name: \\NODE2.TEST.COM Locator Flags: 0xe00001bc ......................... TEST.com failed test FsmoCheck Thanks & Regards Jolyn Tag: Sysvol location Tag: 176151
 - 15
 - can't promote to domain controllers I am having trouble promoting a computer to domain controller in a network that already has 2 DCs. The Active Directory Installation Wizard says, "The version of the Active Directory schema of the source forest is not compatible with the version of Active Direcotyr on this computer." and it suggests that I use ADPREP. When I run ADPREP on the PDC in any of the 3 configurations, it says, "Forest-wide information has already been updated." or "Domain-wide information has already been updated." My only idea is that the existing DCs are Windows Server 2003 and I am promoting Windows Server 2003 R2. Could the R2 vs R1 be the issue or is there something else? Tag: Sysvol location Tag: 176149
 - 16
 - Problems to Add users to group Hello, We have and environment with Windows 2000 servers where some user's have special permissions on groups to add and remove members. ADUC is published under Citrix for that users, currently one of those users is having trouble when trying to add or remove group members, the following error message appears: Picker cannot open because it cannot determine whether weleudc2.we.interbrew.net is joined to a domain" weleudc2 is the domain controller If user closes the error message and then click on add button again, the message does not appear and he can continue working normally. I have tried the same operation with my account and the problem does not happens, have also forced AD to user another domain controller. I have noticed that the following error appears on DC security log: Eventid: 565 Source: Directory Service Access Type: Failure Description: Object Open: Object Server: DS Object Type: %{00000000-0000-0000-0000-000000000000} Object Name: OU=File Shares,OU=User Managed Groups,OU=User Groups,OU=Groups,OU=WE1 Region,DC=we,DC=interbrew,DC=net New Handle ID: - Operation ID: {0,899513655} Process ID: 316 Primary User Name: WELEUDC2$ Primary Domain: WEINTERBREW Primary Logon ID: (0x0,0x3E7) Client User Name: TAP Client Domain: WEINTERBREW Client Logon ID: (0x0,0x3599C3D4) Accesses Create Child Already took a look at: http://support.microsoft.com/kb/816818 but this does not help Any comments will be appreciated. Thanks. Douglas Tag: Sysvol location Tag: 176146
 - 17
 - Disaster recovery and NTDSUTIL This is a multi-part message in MIME format. ------=_NextPart_000_0048_01C82DC8.FD5563C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I''m tryin' to find a solution for the flw scenario: 1st W2K server : ( file server) - logged as directory services restore mode - ntdsutil recovery failed couse the DBinitializate Jet failed error - 5= 30 - eseutil failed - no backup of sytem state - now machine out of domain and in a work group - accounts can reach it running his ip adress 2nd W2K server ( exchange server) operational - accounts logging on to this machine - machine in domain as 2nd PDC Thanks for the help DINO ------=_NextPart_000_0048_01C82DC8.FD5563C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; charset=3Diso-8859= -1"> <META content=3D"MSHTML 6.00.6000.16544" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY>  I''m tryin' to find a solu= tion for the flw scenario: 1st W2K server : ( file server) - logged as dire= ctory services restore mode - ntdsutil recovery failed couse the DBinitiali= zate Jet failed error - 530 - eseutil failed - no backup of sytem state = - now machine out of domain and in a work group - accounts can reach it run= ning his ip adress 2nd W2K server ( exchange server) operational - acco= unts logging on to this machine - machine in domain as 2nd PDC Than= ks for the help DINO </BODY></HTML> ------=_NextPart_000_0048_01C82DC8.FD5563C0-- Tag: Sysvol location Tag: 176143
 - 18
 - change domain for a dc hello on my site i have 2 domains ocap.loc and icap.loc i want to migrate a server from one domain to the other he is a dc for icap.loc can you confirm that i should not have problem if i do tis : 1) demote the server from icap.loc 2) remote the server as a Dc for ocap.loc thanks -- nt Tag: Sysvol location Tag: 176137
 - 19
 - how to remove network error Hello Friends, I am Sachin lad from mumbai. I have one query regarding the emulator. While i am running the emulator i have got one error that general network error.check your network documentation. Can u tell me the answer of this qoestion. Tag: Sysvol location Tag: 176133
 - 20
 - DCPROMO Error Hi all, I have 6 Domain controller in Windows 2000 Advanced Server. All of them I sets as Global Catalog. One of them get failure in the hardware and I didn't have full backup. I try to fresh install the windows but I get error when running DCPromo "The replication operations encountered a database error" In the event viewer I see error in NTDS General with Event ID 1168. Could you help me to fix this problem? Best regards, Cahya Tag: Sysvol location Tag: 176131
 - 21
 - Tools to Monitor AD account lock/unlock information As far as I remember, there's a AD tools to monitor AD account in mutiple servers, so we are able to know that my account was locked by which DC. but now I dont know the tools name and which to download it? thanks in advance. Bruce Tag: Sysvol location Tag: 176116
 - 22
 - Slow AD logon if username longer than 8 chars Hi all. I have a problem with some (not all) remote sites clients that take a veeeery long long time to login, and I'm talking about 30+ minutes, if they ever manage to logon. This happens only on some clients and only with some users. At first I pinpointed the problem to the "home directory" setting, that pointed to w: -> \\myserver\users$\%username% By coincidence I discovered that removing the home directory mapping from the user profile (in the AD management console), the logon was almost instantaneous. I simply started to map the home directory within the login script, with a line like this: net use W: \\myserver\users$\%username% If I use instead this other line I get the slow logon again net use w: /HOME NOW, the problem has returned...logon sloooow again. Only way I managed to find was to shorten the username to something equal or shorter than 8 chars... My AD DC are all Win2000 , I have primary and secondary DNS and WINS located on the first two servers, which are in the central site. The "slow logon" pcs are in peripheric sites, connected with slower lines. The problem is very curious because in these very same "slow" sites I have lots of "fast logon" pcs. Some things I tried are: - recreate the user profile from scratch - check DNS settings, including suffixes - gpupdate (or "secedit /refreshpolicy user_policy /enforce" and secedit /refreshpolicy machine_policy /enforce on win2000 clients) - disable slow link detection All machines (servers and clients) are patched with WSUS. Please help me! Thank you in advance Michele Tag: Sysvol location Tag: 176112
 - 23
 - Adding 2003 server Backup Domain Controller to 2000 Domain I am trying to add a 2003 server with active directory to serve as a backup domain controller to a 2000 Domain. When trying to add AD on the 2003 server, I get an error that the forest is not prepared and to use the Adprep command-line tool to prepare both the forest and the domain. Taking into consideration that on the current 2000 server PDC has Exchange server 2000 installed, what are the proper steps in order to successfully complete this task? Tag: Sysvol location Tag: 176076
 - 24
 - Reverse Lookup zone Hello, Even though my Active Directory DNS is set to Scavenge Record after 7 days, but a lot of information in "Reverse Lookup zone" is very old. These records also should have up to date (7days) right? Why it doesn't refresh? when I nslookup IP, gives different information that when I ping COMPUTER NAME MC Tag: Sysvol location Tag: 176074
 - 25
 - Move tree error I am trying to move a user opbject from one domain to another domain. The domains reside in the same forest. I am trying to use the movetree command. movetree /start /check /s engwdc01.eng.network.local /D opswdc01.ops.network.local /sdn ou=moveme,ou=users,ou=r&d,dc=eng,dc=network,dc=local /ddn ou=moveme,ou=users,ou=exec,dc=ops,dc=network,dc=local /u eng\admin /p (admin password) /Verbose I get an error that says â??dâ?? not recognized and I cannot figure out what is causing the error. I was wondering if anyone could help me. Thanks. Tag: Sysvol location Tag: 176067
- Next
 - 1
 - Tracking User who delted files???? I have a Win2000 Server running Active DIrectory. I have a situation where I KNOW that some files were deleted. I cannot prove if they were deleted by accident or maliciously, but I have my suspiciions. I CAN narrow the possibilities because the files were in a Security Restricted area. So..... Is there any logs, etc, that can tell me explicitly which AD User deleted a specific file? Thanks in advance. Tag: Sysvol location Tag: 176065
 - 2
 - what computer? How can I find what computer an user is log onto? (and vice versa) Tag: Sysvol location Tag: 176064
 - 3
 - Transitive Trusts I have two domains on the same MAN separated by a router. I can see Domain A from B and vice versa. I have trusts setup on each domain so Domain A trust B and Domain B trust A. However, in windows Active Directory Domains and Trusts they are showing up as Transitive - no. How can I set them as yes? Tag: Sysvol location Tag: 176057
 - 4
 - Cross Forest Trust Hello I'm trying to setup a cross forest trust in W2K. I have name resolution working both ways. The distant domainB has AD integrated DNS enabled forwarding to our unix name servers. It appears that this one was able to contact Domain A to create the trust. But when I try to complete the trust relationship on Domain A adding Domain B it fails saying the domain cannot be contacted. Domain A is not using AD integrated DNS only UNIX DNS. Do I need to have AD integrated DNS setup on both sides? I've tested accessing all the required ports using the portping util and everything's successful. Any Ideas why I can't establish the trust on the Domain A side to trust Domain B? -- Thanks! Crisoft Tag: Sysvol location Tag: 176051
 - 5
 - Andy Warhol Posters . Andy directory - web directory - dusiness directory - shopping directoru Webdirectory is human edited web directory with various categories and subcategories. Submission and. Approval is fast (usually 24 hours or less). The directory project has a clear strategic validity, both in terms of free positioning on search engines, and ease of use, by allowing to it's visitors to make the best use of the information for free. www.globelinks.info www.totheworld.info www.totheplanet.info www.totheglobe.info Our directory may be a good solution for website owners when they seek to improve their link popularity and increase their traffic. By submitting your website you get a direct link from one of our inner pages, chossen by you. Your listing consists in your website's title, URL and description. After a few closer looks we decide to include or not your website in our web directory. Web directories are popularly used by webmasters, users, and anyone in Internet business. directories allow Internet businesses to collect relevant links to their websites. This is one of the top strategies used to promote businesses. You should submit your site to as many directories as you can. The submission process is the easiest ever: just browse untill you found the best category for your website, then you'll see the "Suggest Link" button. Please be aware that our system rejects automatically submissions stuffed with keywords or submissions without proper punctuations. Useful resourse: there are loads of specialized directories. So it would be advisable to look up into directiory business directory - web directory - directory - web directory f you have to look up anything related to business, or hit upon a shopping directory to check out the free deals available. You can also check out Directory. directiory business directory - web directory - directory - web directory It is important to put in the proper keywords in order to come across the exact information you are looking for. With the amount of popularity these directories have achieved, they are surely going to revolutionize the information looking scenario especially on the online world. http://www.globelinks.info http://www.totheworld.info http://www.totheplanet.info http://www.totheglobe.info http://www.interester.com CKwJyJGh3jKrm7on2JSN5EueShvWLngU2ARlipVaT7 Tag: Sysvol location Tag: 176049
 - 6
 - LSASS.EXE Error Hi, Domain controller and Workstations in a child domain of mine are getting restarted all of a sudden. The error that I see is "The system process lsass.exe terminated unexpectedly with status code -1073741819. The system will now shut down and restart. ". Could anybody help me to sort out this problem. Thanks Chandimal Tag: Sysvol location Tag: 176032
 - 7
 - actual exam preparation questions and answers braindumps hi, beitcertified is providing latest practice questions and answers brain dumps for almost all certifications. visit http://www.beitcertified.biz and download free preparation and training material. Tag: Sysvol location Tag: 176021
 - 8
 - Server 200 Domain and Server 2003 Domain We currently have two separate domains call them Domain1 and Domain2. They are separate tress and do not even know either one exisits. We have them both on different subnets and route traffic between them via a router. My question is this. We now have a need to have users in Domain2 (Server2003 domain) connect to resources in Domain1 (Server 2000 domain). We can do this as it stands without the trusts...kind of....but it prompts for credentials. Is there a way to set up a TRUST between these two domains so a logon prompt will not popup every time a user attempts to connect to resuorces on domain1 from domain2? In some cases users are even getting the access denied message when attempting to access resuorces from Domain2 to Domain1. If more information is necessary please let me know. I thank you all in advance for your time assisting me with this. Rick Tag: Sysvol location Tag: 176020
 - 9
 - inetorgpersonprevt.ldf on windows 2000 domain for windows 2003 upg I am preparing a windows 2k domain with Exchange 2k for a windows 2003 sever upgrade. The plan is to keep exchange at 2000 for now and upgrade the domain servers to 2003. In the process I am following MS article 325379 rev 21.3 . In the section relating to Exch 2k in Win 2K forests(pages 5 and 6) it states to run the inetorgpersonprevent.ldf script to prevent mangled attribs later (basically remove the dashes in the name) for objects: ms-Exch-assistant-name, ms-exch-labeleduri, and ms-exch-house-identifier. I ran the script and it ran successfully! However, when I use AdSIedit to view the objects the have not changed at all. Am I looking at the right objects? Do I need to use a different tool/location to view the changes? I appreciate your help and info. Thank you. Tag: Sysvol location Tag: 176018
 - 10
 - Question about GUIDs in Interforest migration I have a scenario whereby I am trying to do an an interforest migration between a Windows 2000 source domain and a Windows 2000 target domain, using the ADMT. My understanding is that there is a limitation in ADMT when dealing with Windows 2000 source domains in that the GUIDs are not preserved. What would be the impact of missing GUIDs after the migration? Source: Domain Migration Cookbook, Chapter 4: Restructuring Tools, Disadvantages of Interforest Migration - http://technet.microsoft.com/en-us/library/Bb727128.aspx Thanks, Ben Tag: Sysvol location Tag: 176009
 - 11
 - Explorer unresponsive when port 445 is blocked from client I originally posted this in Winodws Vista administration; I'm posting here to encourage a response. I experience unresponsiveness (also could be seen as slowdown) after joining my Vista machines to the active directory. I experience it particularly when I take an AD-joined laptop and carry it to another location, such as a friend's house or coffee shop. When I do this, and the provider (e.g. Comcast or T-Mobile, because I know the problems occur there) blocks port 445 outgoing, the symptoms will arise. In particular, any function that requires interaction with Explorer (.exe) will take 30-90 seconds to complete. This includes, for example, saving a downloaded file using Firefox. Because Firefox integrates with Explorer to save files (I think to render the icons), when I try to save a file using firefox in this environment, the download will block for 30-90 seconds before proceeding. It seems to be that Explorer is blocking to perform some sort of Active Directory action which requires port 445 (microsoft-ds) on which to communicate. Explorer resolves a name for the AD action but must wait for the TCP timeout to occur before returning control to the calling application. I don't use isolated DNS, so my Active Directory DNS is visible from any host on the Internet. I can see in other deployments why this symptom would not arise -- because if the DNS were isolated, the host would not have an AD server to attempt a connection, and thus would not have to wait for the TCP timeout. I would not be feasible for me to put an AD server at every location, because I have about 2 PCs per location, so it's also difficult for me to isolate the DNS. This problem occurs with or without roaming profiles. It occurs on brand new Vista machines recently joined to the domain. This problem also exhibited itself to a lesser degree in Windows XP. One work-around that often works is to establish a VPN connection to one of the domain controllers. In this way, microsoft-ds traffic can pass unobstructed, and the problem goes away immediately. Unfortunately, it's cumbersome to instruct other users to establish a VPN connection to keep their machine from becoming non-responsive. This to me is clearly a design flaw or design oversight, or possibly just an unsupported configuration. I've applied all Windows Updates as well as kb941649, but the behavior remains the same. I would very much appreciate any suggestions for alleviating this problem. I'm also happy to provide additional details if a Microsoft rep takes interest in reproducing the problem. Sincerely, Jason R. Coombs Tag: Sysvol location Tag: 176004
 - 12
 - Separating trusted domains Hi, I've got a question about removing a trust relationship between two domains that I was hoping that some kind person could help me with. We have two domains that I'm pretty sure are two different forests that are joined together in a two-way transitive trust. One of the domains might be a tree in the forest of the other, but I'm pretty sure that it isn't because it's namespace is different, i.e. Domain1 is named company.com and Domain 2 is called homedomain.com. Is this an incorrect assumption? We would like to gracefully remove the relationship between these two domains (company.com and homedomain.com), and I'm pretty sure that I know how to do it, but after Googling for a few hours, I can only find documentation on how to remove orphaned domains, or what to do if the domains were disconnected un-gracefully. I was hoping that I could list out the steps the basic progression that I'm going to follow and perhaps somebody would be kind enough to tell me if I'm going to screw things up. I removed the trust relationship between the two domains in AD Domains and Trusts, but when I went to AD Sites and Services to delete the homedomain.com site and cease replication, I got a message saying that it couldn't delete the site. I'm guessing that removing the trust first was the wrong order, so I'm going to go back and re-establish the trust. After doing that, here is what I think I should do: 1. Remove the site replication 2. Remove the trust relationship. 3. Remove the zones in DNS? Is this the correct way to do it? I haven't been able to find any documentation on utilities that will remove this relationship gracefully. Can someone please give me some advice about the right way to do this? Thank you so much for any help that you can give... Regards, greyseal96 Tag: Sysvol location Tag: 176003
 - 13
 - DC issue I have a multi-server network with 2 DC's. The "master" DC (PDC,RID,OM) is on one server and the other is just a 2003 DC (DC2). Because of infrastructure changes, the 2 server will not be able to "talk" for about 5 days. I have clients who connect also will not be able to talk to the master DC, but can see the other DC. I have tested this in the past and I have issues with users not being able to log in who can only see DC2. Sometimes their login is slow or Windows will not allow them to log in. Is there something that i need to do to prepare for this? I have thought about getting a virtualized image of DC1 and loading it up @ the DC2 site and allowing users to log in that way. Is this an option? What could happen once DC1 becomes visible again? Thanks in advance. Tag: Sysvol location Tag: 175999
 - 14
 - Internal breech I am trying to catch what I beleive is an internal breach. User accounts are being changed in Active Directory. I am trying to find out who is making the change. Does anyone know how to view the user that changed the account and maybe the IP address of the computer that made the change. The other problem I am rectifing is that all administrators currently use one account which is why I would like to be able to fnid the IP address that made the change. Thanks Ace Tag: Sysvol location Tag: 175998
 - 15
 - KDC error with event Id 11 Hello Seeking suggestions from expertise... We are having AD environment and in one of the ADC we are getting KDC errors with event id 11. There are multiple accounts with name @domain.COM of type DS_USER_PRINCIPAL_NAME. Any suggestions will help me to solve this problem. Thanks in Advance. Santosh K. Tag: Sysvol location Tag: 175997
 - 16
 - Find People Site Found this site. Conduct A People Search. Sign up for free. Pretty cool site <a href=http://find-people-5.blogspot.com/>Find People</a> Bill Tag: Sysvol location Tag: 175979
 - 17
 - Looking for Windows 2008 Co-Authors Guys- First of all, I am sorry for cross posting, but I thought that I should post message in this newsgroup also. I posted similar message in the other news group. Please accept my appologies for cross posting. I am working on several Windows 2008 projects with different publishers, and I need co-authors in my team. If you are interested then please send me your: 1. Resume 2. Prior Writing experience 3. Links to any published articles All I need is good writing skills, and comittment. If you don't have prior writing experience then it is acceptable as long as you are enthusiastic. Thanks, Tariq Azad tariq.azad@rogers.com Tag: Sysvol location Tag: 175978
 - 18
 - Active Directory Replication Problem Hi I have 2 DC in different network segment/vpn and they just have let replicate. ServerA is the master domain controller where is has DNS (primary) service and Exchange installed. ServerB has DNS service and as secondary that is the DNS from ServerA. I can ping the ip address of ServerA at ServerB but I can't ping by it's name. When I do \\ServerA\sysvol or \\ServerA\netlogon it gives me the following message: This event log message will appear once per connection, After the problem is fixed you will see another event log message indicating that the connection has been established. But when I write ">repadmin /showreps" at command line in ServerA it tells me that is replicating with ServerB but when I do the opposite it tells that ServerB isn't replicating with ServerA since xxx date. ========= At the event viewer it appears the following messages: 1) The DNS server list of restricted interfaces contains IP addresses that are not configured for use at the server computer. Use the DNS manager server properties, interfaces dialog, to verify and reset the IP addresses the DNS server should listen on. For more information, see "To restrict a DNS server to listen only on selected addresses" in the online Help. 2) The File Replication Service is having trouble enabling replication from ServerA to ServerB for c:\winnt\sysvol\domain using the DNS name ServerA.domain.com. FRS will keep retrying. Following are some of the reasons you would see this warning. [1] FRS can not correctly resolve the DNS name ServerA.domain.com from this computer. [2] FRS is not running on ServerA.domain.com. [3] The topology information in the Active Directory for this replica has not yet replicated to all the Domain Controllers. ========== When I try to force replication from command line at ServerB the following message appears: Command: C:\>repadmin /replicate ServerA ServerB /force repadmin running command /replicate against server ServerA.domain.com DsBindWithCred to ServerA.domain.com failed with status 1722 (0x6ba): Can't retrieve message string 1722 (0x6ba), error 1815. Hopping for help... Thanks in advance Ricky Tag: Sysvol location Tag: 175969
 - 19
 - SYSVOL GPO's re:copying I have a former FSMO with an FRS problem. I don't care to fix the FRS problem becasue the server is being replaced by one of the same name but without the DC role. Apparently becasue of the FRS problem, my GPO folders (c:\winnt\sysvol\<my domain name>\polices\) did not replicate to my new FSMO when I transferred the roles. They still get applied when users logon to the domain but I can not longer manage them--I get an error, "the sytem cannot find the path specified", and as I stated, the folders are not in the same folder on my PDC. Can I simply copy the folders to my FSMO server? Tag: Sysvol location Tag: 175964
 - 20
 - Joining computer to my domain Whenever I have new computers or computers that need to be re-imaged when I'm setting up an old employee's machine for a new one I have to use a corporate ISO image. This image joins us to the corporate domain. The first thing I have to do when I'm done with the image is join the computer to our domain. I've been doing this for years without any problems, suddenly this is the 4th machine I've had difficulty with. When I go into my computer|properties|computername and change the domain name, I then get prompted for a username/password of a user with permissions to be able to join the computer to the domain. I put in the DomainName\administrator username/password, and there's a long pause. Then an error comes back saying that "The specified server cannot perform the requested operation." Oddly enough when I leave the username/password blank and hit enter it successfully joins the machine to the domain. This concerns me because something has changed and I fear it might be a security issue. I'm not sure where to even start down this path, but like I said I've been doing this for years and now suddenly I don't need to authenticate to join my domain and that's very disturbing. Can someone help me figure out how to troubleshoot something like this? I'm not sure I'm even going to the right forum as it could be several different things. The machine in question is a P4 windows XP SP2 machine. Tag: Sysvol location Tag: 175963
 - 21
 - What to expect? Removing Active Directory. I have Active Directory running on my tiny network at home. I'm considering removing it, since I'm not (I don't think) using any feature of it (*), and Home Server doesn't get along with it. I know the mechanics of it (running dcpromo.exe), but I'm worried about the affect. (*) Now the only feature that I am using that is tied to AD are domain account. In fact, as far as I know, "Administrator" is the local account on any of the PCs. Most of my documents and settings are under a domain account on one machine, and I'd hate to lose access to them (the documents I think I can deal with, but the idea of re- installing dozens of applications just to regain registry entries sound like a nightmare.) What happens to these domain accounts? Also, I'm using the DNS, WINS, DHCP and Routing services. What happens to these once AD is removed? Tag: Sysvol location Tag: 175962
 - 22
 - Account Operators No longer able to edit accounts All of a sudden our account operators group is no longer able to change passwords or unlock accounts. This started maybe 2 days ago. We are running a 2000 mixed mode domain with only two DCs both local. We have not made any changes within AD. Any thoughts would be appreciated. Tag: Sysvol location Tag: 175960
 - 23
 - Domain policy vs local policy Hello, We have Win 2000 domain, setup by someone who is not working here anymore. Problem is with domain policy; It's denying login locally to everybody, but domain admins. We need to be able to login locally as local administrator. Can not find settings in Group Policies how to enable it. On local mashine i can enable login locally, but effective policy is grayed out and login is denied. How to fix it? Thanks -- Ilya Tag: Sysvol location Tag: 175952
 - 24
 - NTDS.DIT database is inconsistent Hoping to get a help for this problem: - Starting in the windows recovery-directory service consol ( W2K) and analizing the ntis.dit by ntdsutil - sem - d - go f, I obtained the "inconsistency of the database" - I have no sytem back up - I have another pdc in the newtwork ( W2K) - How can I restore the first pdc? - It' possible to use the secind pdc ntdis.it file for the first one? Thaks in advance Dino A. Tag: Sysvol location Tag: 175949
 - 25
 - Active Directory User I create a user with the following: MembershipCreateStatus status; MembershipProvider mp = Membership.Providers["MyAdMembershipProvider"]; mp.CreateUser("Test2user@domain", "pa344ss123word!*&", "me@here", null, null, true, null, out status); This works fine. The only thing now is the Pre Windows 2000 login name is set to garbage as far as I can tell. e.g.: domain\$SS60H8-PPK4IRVSFIK1 We do have a couple of legacy NT based systems (about 2 I think) but I would like to keep existing compatibility. How can I control the Pre Windows 2000 login name? -- Mick Walker Software Engineer http://www.mick-walker.co.uk Tag: Sysvol location Tag: 175947

I have a Windows 2003 domain. When I do a dfsutil /pktinfo the list of
domain controllers for the sysvol referral do not have the same site DCs
listed first. Should they be?

Top

Re: Sysvol location by Meinolf

Meinolf
Mon Dec 10 09:43:04 PST 2007

Hello Chris,

If i understand this command correct it takes the DC, where you are authenticated
to. So if it is from another site, have you configured ADSS for your environment?

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.dts-l.org/goodpost.htm

> I have a Windows 2003 domain. When I do a dfsutil /pktinfo the list of
> domain controllers for the sysvol referral do not have the same site
> DCs listed first. Should they be?
>

Top

Re: Sysvol location by Chris

Chris
Mon Dec 10 10:02:42 PST 2007

My authenticating DC is always in the same site as I would expect. It's
just the DFS referral to the Sysvol that seems incorrect. What is ADSS?
Thanks.

Meinolf Weber wrote:
> Hello Chris,
>
> If i understand this command correct it takes the DC, where you are
> authenticated to. So if it is from another site, have you configured
> ADSS for your environment?
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.dts-l.org/goodpost.htm
>
>> I have a Windows 2003 domain. When I do a dfsutil /pktinfo the list of
>> domain controllers for the sysvol referral do not have the same site
>> DCs listed first. Should they be?
>>
>
>

Top

Re: Sysvol location by Jorge

Jorge
Sun Dec 23 16:30:25 PST 2007

you might wanna look at:
http://blogs.dirteam.com/blogs/jorge/archive/2007/06/30/dc-locator-process-in-w2k-w2k3-r2-and-w2k8-part-1.aspx
http://blogs.dirteam.com/blogs/jorge/archive/2007/07/02/dc-locator-process-in-w2k-w2k3-r2-and-w2k8-part-2.aspx
http://blogs.dirteam.com/blogs/jorge/archive/2007/07/02/dc-locator-process-in-w2k-w2k3-r2-and-w2k8-part-3.aspx

"Chris W" <cwagner@mail.net> wrote in message
news:OVIzpz0OIHA.6060@TK2MSFTNGP05.phx.gbl...
>I have a Windows 2003 domain. When I do a dfsutil /pktinfo the list of
>domain controllers for the sysvol referral do not have the same site DCs
>listed first. Should they be?

Top