MarkH
Fri Feb 29 06:11:00 PST 2008
I went to AD Sites and Services, setup a new site (which is my location 2),
setup the subnet with the router's static IP address and subnet mask, moved
the server that is located at location 2 to the new site and associated it
with the IP address of that location.
The server in location 2 is a DNS server. There is also a DNS server in
location 1.
Still unable to replicate.
Please bare with me, this is my 1st time doing this and my Windows 2000
Server book doesn't tell me much.
--
Mark Hughes
"Meinolf Weber" wrote:
> Hello MarkH,
>
> Since windows 2000 there is no longer a PDC/BDC concept. All DC's are the
> same except of the FSMO roles, one of them is the PDCEmulator role, but theoretical
> any DC can get this role.
>
> So, if you have 2 locations, i assume you have 2 different subnets running,
> connected via a router. What you have to configure is Active Directory Sites
> and services and add the subnet from location 2 and also move the DC to this.
>
> If you have clients there, make it DNS server, reconfigure the clients there
> to that DNS server as preferred and it should also be a Global catalog server.
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and confers
> no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!!
http://www.blakjak.demon.co.uk/mul_crss.htm
>
> > We have 3 Win2000 SP4 Domain Controllers. Two of these, the PDC & 1
> > BDC at location 1 and 1 BDC at location 2.
> >
> > "Meinolf Weber" wrote:
> >
> >> Hello MarkH,
> >>
> >> You talk about PDC/BDC, do you use NT4?
> >>
> >> Best regards
> >>
> >> Meinolf Weber
> >> Disclaimer: This posting is provided "AS IS" with no warranties, and
> >> confers
> >> no rights.
> >> ** Please do NOT email, only reply to Newsgroups
> >> ** HELP us help YOU!!!
http://www.blakjak.demon.co.uk/mul_crss.htm
> >>> We just built a new building in location 2.
> >>>
> >>> I moved 1 of the BDC's from location 1 to this building in location
> >>> 2. How do I get the BDC in location 2 to talk to to the PDC in
> >>> location 1?
> >>>
> >>> By the way, all of our ports except the ones that we need on the
> >>> router's firewall are blocked. I'm not sure if there is a special
> >>> port that this comm is suppose to talk over.
> >>>
>
>
>