IntelXeon Vs Intel Itanium
Hi All,
How can I port 32 Bit driver to 64 Bit Intel Xeon ?
Will Intel Itanium (IA64) driver work on Intel Xeon ?
Which DDK should i use for Intel Xeon ?
Please let me know.
Thanks in Advance
Mangesh Tag: x64 with German MUI available by atelco Tag: 10325
CAPICOM for x64
Hello,
a question concerning CAPICOM.
The CAPICOM COM client provides services that enable application developers
to add security based on cryptography to applications. CryptoAPI includes
functionality for authentication using digital signatures, for enveloping
messages, and for encrypting and decrypting data.
We need this funktionality on Win PE for x64. But i can't find a CAPICOM.dll
for x64.
Neither on an intalled x64-System nor on the WIN PE 2005.
Is there any chance that Microsoft allocates a 64-Bit capicom.dll in the
near future?
Many thanks,
best regards,
Joachim Tag: x64 with German MUI available by atelco Tag: 10320
" Longhorn" to christened" Windows Vista"
Is this new version of Windows 64bit?
www.microsoft-watch.com
--
Jesus is Lord Tag: x64 with German MUI available by atelco Tag: 10304
ATI Control Panel
I have installed the ATI Catalyst drivers (5.7) and Control Panel. But the
control panel doesn't seem to start. Has anyone encountered this problem and
does anyone know of a solution? Tag: x64 with German MUI available by atelco Tag: 10294
Large SATA hard drive (250 gig) - XP64
Hey all,
I have a new problem - After I installed XP 32-bit and then went back to XP
64-bit, all of a sudden my hard drive is limited to the old 130 gig thing.
The XP-64 install only sees the 130 gig. How do I get my 250 gig hard drive
to show up properly again?
It is a Hitachi DeathStar SATA 250 gig drive
Here's what I have tried:
1) boot up with an ME floppy, run fdisk, delete the unknown partition, and
run the XP64 setup
no luck
2) set in the bios from Auto to Large, on disk access
no luck
3) enable/disable raid support in BIOS
4) look for the bigdrive (or whatever) registry entry, but it does not
exits - and I think it is not supposed to in XP64, but I could be wrong.
I could swear (but am starting to feel dillusional) that when I installed XP
64 fresh on the drive when it was brand new, that it saw all 250 gigs. I
just don't know anymore. any ideas?
Oh yeah, I also updated the BIOS
Thanks,
Shane Tag: x64 with German MUI available by atelco Tag: 10291
32 bit applications
How do I run 32 bit applications on x64? I can't find much on "WOW"? Every
32 bit program that I try to install fails. Thanks JP Tag: x64 with German MUI available by atelco Tag: 10284
Where are the display drivers?
When installing the ATI display drivers, two display devices end up with no
drivers. These are the NTAATIMD40 and NTAATIRV40 devices. Other posts have
said to install the windows drivers using the manual install. However, I
have no idea where these drivers are. A little help would be welcome. Tag: x64 with German MUI available by atelco Tag: 10281
address line A20 enabled
every time i try to boot from the trial CD, i get this error and its quite
annoying, does anyone have any solutions for this?
system:
amd64 3700+
1gb mushkin ram in dual channel
DFI lan party ut ultra-D nf4 motherboard
gigabyte 6600gt 128mb
80gig maxtor hard drive. Tag: x64 with German MUI available by atelco Tag: 10246
RAW Image and Thumbnail Viewer
I was wondering if anyone else was having problems installing this new
PowerToy on x64? Is there a chance that the program will be made to run in
an X64 environment?
It would make sense 64-bit computing is used largely by the creative
community. Tag: x64 with German MUI available by atelco Tag: 10241
Wireless Network Adapter
Can anyone recommend a good 802.11g card for my 64-bit box. My D-Link does
not have a driver available. In fact I am having trouble finding a card that
has a driver for XP 64-bit from any manufacturer including Microsoft. Tag: x64 with German MUI available by atelco Tag: 10237
"Error Loading Operating System" After X64 CD Install and Reboot
I recently purchased Microsoft Windows XP x64 Professional Edition for my
computer that I built. It has a Intel Pentium 4 630 Prescott 3.0GHz Processor
with hyper-threading and 64-bit abilities. After I booted the installation
disk for Windows, formatted the hard drive (full format, not quick way), and
it copied all of the necessary files... it rebooted the system. I ejected the
CD so that the hard disk would boot... I get the error: "Error Loading
Operating System". I tried reformatting the hard drive and starting the
installation process over a couple times, same result. I read some other
posts that are roughly similiar to mine and it seems everyone is having
problems with their drivers and SATA drives, etc. I am just using an IDE ATA
hard drive. The only hardware that I have connected to the motherboard are my
ATI Radeon 9100 PCI graphics card, CD burner, and hard drive. Does anyone
have any idea what may be causing my problem? Thanks! Tag: x64 with German MUI available by atelco Tag: 10223
Sony CyberShot Drivers
It says USB 2 Compatible & presumably no drivers should be needed but I'm
getting the yellow icon & cant transfer images frm the cam to my machine
Anyones been lucky so far ?
Sony P73 Cybershot 4.1 Mega
Winx64 (final)
Thanks
]{artik Tag: x64 with German MUI available by atelco Tag: 10221
Getting started with the xp-pro x64 3-month trial cd
Hi, I have downloaded the xp-pro x64 trail iso image and burned to a cd.
However the cd is not bootable, and I am trying to install the os on a
completely new pc with an empty unformatted HDD. Can anyone help me get the
installation started? Tag: x64 with German MUI available by atelco Tag: 10208
USR Modem driver
Some of you posted messages that their USR modem
work OK in XP 64 Bit.
I called USR pre-sales, one ignorant guy said it is no
problem installing any of USR modems in 64 XP.
So I went and bought USR5660a, but the thing would not install.
Checked for 64 bit drivers, but non found.
Called USR support, they apologized, and said they don't have
any 64 bit drivers for any modem yet.
I can wait, I use the modem for in case the DSL went down.
I am curious how some the members were able to install the USR modem. Tag: x64 with German MUI available by atelco Tag: 10197
indeo codec for win64
anyone know if there's a way to get the indeo 5 codec working on win64?
it looks like it does not come with win64 by default... it does not appear
in system information->system summary->components->multimedia->video codecs
i saw some related msdn/mskb articles about it being pulled from winxp sp1,
and about ligos taking over support for it, but it was apparently re-added in
winxp sp2 and there is a free download (Q327979) from microsoft which works
on regular 32-bit winxp but does not work on my win64 system
thank you! Tag: x64 with German MUI available by atelco Tag: 10193
no win update/xp64
hiya
i got an athlon 64 with dual win32/win64...
it wont update at all...and as far as i can tell,theres no activex to
autoupdate...(???)
i have full internet funcionality...it just dont update...?
help! Tag: x64 with German MUI available by atelco Tag: 10183
EnumProcessModules() weirdness
This is a question about running 32-bit applications on 64-bit machines.
It's kind of tedious...
32-bit OS = Win XP Sp1
64-bit OS = RTM Standard Server 2003 Sp1
There's some example code that's been around for a long time that shows how
to print the names of all the running processes on the system.
It goes EnumProcesses() - OpenProcess() - EnumProcessModules() -
GetModuleFileNameEx() - printf()
I modified the example to not enumerate all of the component modules - I
just want the executable name - and to put everything on one line.
To compile on 32-bits, I use:
1) Visual Studio 6
2) The IFS DDK + 32-bit Platform SDK and the build utility
(no difference in results)
To compile on 64-bit, I use the 64-bit version of option 2 above.
When I compile and run this on 32-bits, it mostly works. The few access
denied errors are acceptable. When I copy the 32-bit image to the 64-bit
machine, it mostly doesn't work. When I compile and run on 64-bits, it
works. Three outputs below:
===== 32-bit image running on 32-bit machine =====
Process ID: 00004: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 00504: \SystemRoot\System32\smss.exe
Process ID: 00552: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 00576: \??\F:\WINDOWS\system32\winlogon.exe
Process ID: 00620: F:\WINDOWS\system32\services.exe
Process ID: 00632: F:\WINDOWS\system32\lsass.exe
Process ID: 00800: F:\WINDOWS\system32\Ati2evxx.exe
Process ID: 00816: F:\WINDOWS\system32\svchost.exe
Process ID: 00872: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 00940: F:\WINDOWS\System32\svchost.exe
Process ID: 01012: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 01088: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 01276: F:\WINDOWS\system32\spoolsv.exe
Process ID: 01452: F:\WINDOWS\system32\Ati2evxx.exe
Process ID: 01532: F:\WINDOWS\Explorer.EXE
Process ID: 01632: F:\Program Files\ATI Technologies\ATI Control
Panel\atiptaxx.exe
Process ID: 01640: F:\Program Files\Analog Devices\SoundMAX\SMax4PNP.exe
Process ID: 01648: F:\Program Files\Analog Devices\SoundMAX\Smax4.exe
Process ID: 01660: F:\Program Files\Intel\Intel(R) Active
Monitor\imontray.exe
Process ID: 01668: F:\Program Files\HP\hpcoretech\hpcmpmgr.exe
Process ID: 01676: F:\Program Files\Roxio\Easy CD Creator
5\DirectCD\DirectCD.exe
Process ID: 01684: F:\PROGRA~1\Lavasoft\AD-AWA~1\Ad-Watch.exe
Process ID: 01692: F:\Program Files\HP\HP Software Update\HPWuSchd2.exe
Process ID: 01700: F:\Program Files\Messenger\msmsgs.exe
Process ID: 01708: F:\WINDOWS\system32\ctfmon.exe
Process ID: 01740: F:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
Process ID: 01852: F:\WINDOWS\System32\drivers\CDAC11BA.EXE
Process ID: 01876: F:\PowerPanelPlus\upssrv.exe
Process ID: 01908: F:\WINDOWS\system32\inetsrv\inetinfo.exe
Process ID: 01916: F:\PowerPanelPlus\upsio.exe
Process ID: 01952: F:\Program Files\Common Files\Microsoft
Shared\VS7Debug\mdm.exe
Process ID: 00136: F:\Program Files\Analog Devices\SoundMAX\SMAgent.exe
Process ID: 00176: F:\WINDOWS\System32\svchost.exe
Process ID: 00232: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 00416: F:\Program Files\Intel\Intel(R) Active Monitor\imonnt.exe
Process ID: 02160: F:\WINDOWS\system32\wscntfy.exe
Process ID: 02588: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 02792: F:\WINDOWS\System32\svchost.exe
Process ID: 02180: F:\Program Files\Outlook Express\msimn.exe
Process ID: 02780: F:\WINDOWS\system32\notepad.exe
Process ID: 00128: F:\Program Files\Microsoft Visual
Studio\Common\MSDev98\Bin\MSDEV.EXE
Process ID: 03472: F:\WINDOWS\system32\cmd.exe
Process ID: 02788: G:\Pid\objchk_wxp_x86\i386\Pid.exe
===== same 32-bit image running on 64-bit machine =====
Process ID: 00004: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 00360: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 00408: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 00432: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 00476: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 00488: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 00696: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 00764: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 00860: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 00896: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 00908: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 01036: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 01064: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 01188: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 01228: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 01288: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 01312: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 01340: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 01424: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 01524: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 01728: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 01952: E:\WINDOWS\SysWOW64\svchost.exe
Process ID: 02012: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 00840: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 02212: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 02540: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 02684: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 02756: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 02184: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 01876: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 00392: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 02188: E:\Pid\32\objchk_wxp_x86\i386\Pid.exe
===== 64-bit image running on 64-bit machine =====
Process ID: 00004: *** EnumProcessModules() returns ERROR_PARTIAL_COPY
Process ID: 00360: \SystemRoot\System32\smss.exe
Process ID: 00408: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 00432: \??\E:\WINDOWS\system32\winlogon.exe
Process ID: 00476: E:\WINDOWS\system32\services.exe
Process ID: 00488: E:\WINDOWS\system32\lsass.exe
Process ID: 00696: E:\WINDOWS\system32\svchost.exe
Process ID: 00764: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 00860: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 00896: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 00908: E:\WINDOWS\System32\svchost.exe
Process ID: 01036: E:\WINDOWS\system32\spoolsv.exe
Process ID: 01064: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 01188: E:\WINDOWS\System32\dns.exe
Process ID: 01228: E:\WINDOWS\System32\svchost.exe
Process ID: 01288: E:\WINDOWS\system32\inetsrv\inetinfo.exe
Process ID: 01312: E:\WINDOWS\system32\tcpsvcs.exe
Process ID: 01340: E:\WINDOWS\system32\sfmsvc.exe
Process ID: 01424: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 01524: E:\WINDOWS\System32\wins.exe
Process ID: 01728: E:\WINDOWS\System32\svchost.exe
Process ID: 01952: E:\WINDOWS\SysWOW64\svchost.exe
Process ID: 02012: E:\WINDOWS\System32\svchost.exe
Process ID: 00840: E:\WINDOWS\Explorer.EXE
Process ID: 02212: E:\WINDOWS\System32\svchost.exe
Process ID: 02540: E:\WINDOWS\system32\wuauclt.exe
Process ID: 02684: *** OpenProcess() returns ERROR_ACCESS_DENIED
Process ID: 02756: E:\WINDOWS\system32\wpabaln.exe
Process ID: 02184: E:\WINDOWS\system32\cmd.exe
Process ID: 01876: E:\WINDOWS\system32\cmd.exe
Process ID: 00392: E:\WINDOWS\system32\cmd.exe
Process ID: 00724: E:\Pid\64\objchk_wnet_amd64\amd64\Pid.exe
Anybody have any suggestions as to why EnumProcesses() and OpenProcess()
will work in either situation but EnumProcessModules() won't?
Anybody have the ability to define ERROR_PARTIAL_COPY from
EnumProcessModules()?
Regards,
Mickey. Tag: x64 with German MUI available by atelco Tag: 10181
Select Emulation Image
Just installed my TAP copy, fresh install, the works, after rebooting a black
console screen shows and prints the following message all down the screen
Select Emulation Image: 1
Select Emulation Image: 2
Select Emulation Image: 3
Select Emulation Image: ... etc, uses numbers and symbols
Boot Image: 0
hitting zero boots right in but why do i see this message at all and why
can't i just have it boot it like normal? Tag: x64 with German MUI available by atelco Tag: 10174
50th State checking in... TAP delivery
...so my wife gets her usual UPS giant furniture delivery boxes from pottery
barn or similar this afternoon.
and there's a small envelope package...but I assume its all part of the set,
as all it says is 'Fufillment Center' on the envelope.
No microsoft, no zomax, no nothing. Like i ordered adult material, or regrow
hair kit, viagra or something...
So I'm on the sofa, watching Jenna Jameson on E! special...and then she
comes home, and excitedly starts opening her packages, and says...'honey,
did you order this?' ...and hands me x64! :)
Talk about getting a double boner!
anyways, its in a dvd clamshell and has a COA decal on the back which says
to affix to your PC exterior:
Windows XP Pro x64 Ed Tech Advancement OEM Software
So is this the one that folks have been updating over their existing 180 day
trial (build 3790) with success?
If so, then I to will give it a go as well.
order number was x0003211000** (last two digits replaced with **)
it came via UPS 2nd day air from Fremont, CA.
Hope you guys get yours soon!
Then the discussions here should be more productive! Tag: x64 with German MUI available by atelco Tag: 10173
Unknown Device in Device Manager - how to identify?
In my x64 Device Manager under Other Devices I have an Unknown device (with
the usual yellow question mark).
On the Properities page, General Tab, under Location: on PCI bus. Under
status "The drivers for this device are not installed. (Code 28)."
On the Driver Tab, everything is Unknown or Not Available, etc.
On the Details Tab the
Device Instance Id is "ACPI\ATK0110\1010110
Hardware Id is "ATK0110
Several properties are blank
Enumerator is ACPI
Capabilities are "CM_DEVCAP_UNIQUEID" and "CM_DEVCAP_SILENTINSTALL"
Devnode Flags are "DN_HAS_PROBLEM" "DN_DISABLEABLE" "DN_NT_ENUMERATOR"
and "DN_NT_DRIVER"
etc, etc.
I am looking for tips on figuring out how to identify this unknown device so
I can deal with it appropriately. There are no cards in the PCI slots (but
I am aware that the PCI bus supprots many devices).
WinXP Pro x64, AMD Athlon 64 x2, 2GB ram, ASUS A8N SLI Deluxe board, SATA
Hitachi drives (not Raid), GeForce 6800 GT video on PCI Express.
I suspect something like a fan sensor unplugged, but what do I know?
Be happy to have suggestions from all you fine folks. Tag: x64 with German MUI available by atelco Tag: 10161
How long till they ship full 64 bit
I was just wondering what is the turn around time right now? I am just
wondering if it still in the 4-6 week area before you get a tracking number.
Thanks Tag: x64 with German MUI available by atelco Tag: 10157
What happened to my TAP Shipment?
Dear Microsoft,
What happened to my TAP shipment?
TAP Order Number: X0001929
UPS Tracking Number: 1Z0EA2290335480049
Sincerely,
Kevin Panzke Tag: x64 with German MUI available by atelco Tag: 10151
Computer Description
Has anybody noticed that you can't change the computer description in Windows
XP Professional x64 Edition? Tag: x64 with German MUI available by atelco Tag: 10150
Received Notification Of TAP Shipment
I haven't received the order, just the confirmation of shipment.
Funny part is, The Order Status Login Still shows "Received Order, Will Bill
When Shipped"...guess there's a lag between shipment and billing.
Your order for the Microsoft Windows x64 Technology Advancement
has shipped!
Order Number: X1197XXXX
1Z0EA229033552XXXX
Note: Duties and Taxes for shipments to non-US locations are
the responsibility of the recipient.
Thank you again for your order.
Microsoft Windows x64 Technology Advancement Team
001710XXXX . MS64SI
Al Swearengen Proprietor
Gem Saloon
Deadwood
Dakota Territory
POST ON Tag: x64 with German MUI available by atelco Tag: 10139
Feel stupid for asking - What is TAP?
Everybody seems to be anxiously awaiting it's arrival, and it's free. I feel
like a dolt not knowing what it is. Can someone enlighten me so I can get in
on the excitement?
TIA Tag: x64 with German MUI available by atelco Tag: 10095
Install Windows XP x64
Hello all,
I just set up a new rig: ASUS A8V Deluxe, AMD 64 3200+, 1 GB Kingston, 80 GB
Seagate SATA, 80 GB Maxtor EIDE, ATI Radeon 9600XT.
I am installing Windows XP x64 on the SATA drive (connected to the VIA
K8T800 Pro Controller). I succesfully used the F6 method to get Windows x64
to recognize the SATA drive using dirvers provided from ASUS. After
selecting the SATA drive and formatting, Windows asks for a "VIA RAID Combo
Driver Diskette" to be inserted in the floppy drive. I have tried what I
thought was the right disk (VIA Hyperion Pro 0.99) to get past this issue,
but this did not work.
I am currently stuck here...I have no idea what to do now.
Also, I should mention that Windows x64 recognizes the SATA drive when I
install x64 on the IDE drive...I was reading/writing data from the SATA
drive. So, the SATA drive works fine.
Please HELP!!!!!
Thanks,
Francis Tag: x64 with German MUI available by atelco Tag: 10089
TAP received in France/Europe
Hello,
I'm very pleased to announce the Group, and particularly my fellow
Europeans, that I just received my TAP media this morning.
BTW, my "official" online status still displays the famous message : "Order
has been received. You will be charged at the time of order shipment".
Furthermore, my credit card is still not charged at this very moment, LOL !
Thank you very, very, very much Microsoft and Zomax : this is the first time
in my life that I receive a *legal* and *full* software for free ;)
Cheers,
Jean-Baptiste Tag: x64 with German MUI available by atelco Tag: 10077
Cannot boot at all; not even safe mode.
Ahoy!
Until upgrading to the full version, 64-bit was working fine (the trial
version, that is). Now that I have obtained the full version of it, it
won't boot up AT ALL! This is really starting to get at me since I have
bought a 250gb HDD dedicated to the x64 platform. I have tried installing
two different copies of x64 (one being my friends copy and the other mine)
onto 1. a partitioned hard drive; 2. a completely different hard drive.
What I don't understand is why the trial version ran fine and the full
version does not even boot! It just simply reboots after I select it from
the boot menu (ie, selecting which version of Windows to run). I have an
AMD 64-bit 3200 processor; 1GB RAM; ATI Radeon X800PRO (overclocked in
Windows 32-bit with ATI Tool); two Seagate Barracuda 7200rpm HDD's
(200gb/250gb); and an ASUS K8V SE Deluxe. I have no idea as to what's going
on. If it helps, I can get it to show a BSOD and write that down to post
here. Can anyone please help me?
Thanks in advance,
JimmY! :D Tag: x64 with German MUI available by atelco Tag: 10056
How do I unlock my RTM Trial version of Win64?
I got the RTM Win XPpro 64 edition that is good for 3 or 6 months.. How do I
get it unlocked to the Full version or basically where I don't have to worry
about the Trial version running out ? HELP !
if you msn messenger, add me and lets talk ! jeremiah739@hotmail.com
If you like to email, email me: godzgrace1973@comcast.net
Thanks for the Help Tag: x64 with German MUI available by atelco Tag: 10042
Nvidia Firewall
I have seen several references to The Nvidia firewall and must seem to say
to install it and than uninstall it. My Question, what is the problem with
the Nvidia firewall?
Richard Tag: x64 with German MUI available by atelco Tag: 10026
Important Update for European customers awaiting their TAP !
Hi Fellows of the Old World ;)
I just tried the 10-digit number that starts by "94..." with DHL, that Zomax
provided me in their last e-mail, and it appears that my TAP is en route to
France ! Again, my order status remains unchanged and my credit card has not
been charged yet.
I think the Europeans will get their TAP via DHL, and that it's on its way,
even without any change in their status and even without being charged yet
:)
You can track your shipment here :
http://www.dhl.com/publish/g0/en.high.html
Good Luck !
Jean-Baptiste Tag: x64 with German MUI available by atelco Tag: 10006
XP x6
Iâ??m having a problem get XP x64 to complete its installation.
When the install program restart the second time with Windows XP x64 Pro
logo screen showing, system halts and goes to the Diagnostic Startup Screen,
same screen you get when you hit F8 during normal Windows startup. If you
select Safe Mode, system displays list of files being loaded as usual, but
halts and does a hardware reboot. Any attempt to start windows after that
takes you directly to Diagnostic Startup Screen.
Itâ??s a new system and I installed Windows XP Pro 32 Bit Edition, before
trying to install XP x64, and all hardware test Ok.
Iâ??m using version 6.66 nForce4 SATA Drivers download for nVIDIAâ??s Web Site
for the RAID Installation floppy. RAID Driver floppy created by the CD that
came with ASUS A8N-E motherboard caused the XP x64 Install to crash right
after it read the drivers supplied on the ASUS CD.
My system is includes the following hardware.
(1) Thermaltake Tsunami VA3000 Series case.
(2) Thermaltake Purge Power TWV500W W0057 Power supply.
(3) AMD Athlon 64 X2 4600+
(4) ASUS A8N-E Motherboard with BIOS Version 1005.
(5) ASUS Video Graphics card EAX800XL/2DTV/256M/A
(6) 2 MB DDR PC3200 Memory, Corsair TWINX2048-3200PRO, configured as Dual
Channel.
(7) 2 Western Digital 160GB SATA Hard Drive Configured as RAID 0, Drive WD
SATA2 P/N WD1600JS
(8) CD\DVD Drive, Plextor SATA P/N: PX-716SA/SW.
It looks to me like there is a driver problem, but I donâ??t know how to tell
which driver and if I knew the only drivers I have that I can change are the
ones on the RAID Drive floppy. All the rest come form the Windows XP x64
installation CD. One other thing I donâ??t understand is what drivers are
required in Safe Mode that are not required when the installation is in GUI
Display Mode.
Any pointers on how to fined the problem or as to what Iâ??m doing wrong would
be greatly appreciated. Tag: x64 with German MUI available by atelco Tag: 10001
Broadband Pitfalls
I am considering upgrading to a Broadband ISP offered by my phone company.
Just wondering what pitfalls I might run into, like should I be all right
with the modem and router or am I apt to have problems looking for drivers.
Wouls appreciate any feedback.
Richard Tag: x64 with German MUI available by atelco Tag: 9994
AOL Explorer on x64
There's a new AOL Explorer that will load and run on x64. Go to the
following URL to download the installer:
http://fileforum.betanews.com/detail/AOL_Explorer/1107803894/1
Please note the I do not subscribe to AOL.
I just wanted to see if their new AOL Explorer would run on x64 since
there have been inquiries about AOL on x64, and it does install and run. Tag: x64 with German MUI available by atelco Tag: 9988
Dual everything...
But they say "wait for the driver situation to settle down a bit" before
trying x64 Edition...
http://www.extremetech.com/article2/0,1697,1838341,00.asp Tag: x64 with German MUI available by atelco Tag: 9978
Changing Out Motherboard With Sata
I'm changing out my Asus K8V motherboard to a Asus A8N-E motherboard. I have
already have sata drivers installed on my old motherboard. My question is
will I lose my data on these drives when I change the motherboard out. These
motherboard have different chipsets. Tag: x64 with German MUI available by atelco Tag: 9965
WD SATA 10K rpm
Any one running the WD 10000 rpm HD? I thinking very hard about getting one.
World like some input.
AMD 3400+
MSI K8N Neo
1.5 Mg Mem
Thanks Tag: x64 with German MUI available by atelco Tag: 9949
Disk Management Error(Win XP x64)
Has anyone seen this? When I try to view the disk properties in the lower
pane of Disk Management it reports "The operation was canceled due to an
internal error".
I believe this is causing other errors such as not being able to create an
ASR disk. Tag: x64 with German MUI available by atelco Tag: 9943
Using command line to copy files
Hello,
We have recently migrated many of our websites to a dual AMD Opteron 64
server with Windows 2003 server Standard x64 installed. In the 32-bit
environment the websites were running on before, I was able to move the IIS
logs to another folder to be processed by a website statistics application
(the 32-bit environment was Windows 2003 Server standard). In the 64 bit
environment anytime I try to use a command line untility to copy the IIS logs
I get access denied, yet I can copy and move the files in Windows Explorer.
Any suggestions or ideas would be much appreciated.
Thanks,
Blair Tag: x64 with German MUI available by atelco Tag: 9933
So the TAP media finally came yesterday
My tracking number never showed in the UPS system, so I was sort of
surprised to see it show up. I got around to installing it today, and
despite it being OEM, it's still able to upgrade directly over the trial
version. Glad to see that orders are actually getting filled. Tag: x64 with German MUI available by atelco Tag: 9929
Windows XP x64 SATA Drivers
Hello all,
I am building a new computer, and I would like to install Windows XP x64 on
to a SATA hard drive. I know that there are no SATA drivers on WinXP
(32-bit); so, one would have to use a floppy with the drivers during the
install. I would like to know if this is still the case on Windows XP x64 -
do you need SATA drivers for the install, or will Win XP x64 recognize the
SATA drive on its own?
Thanks in advance,
Francis Tag: x64 with German MUI available by atelco Tag: 9927
Request for Tips: Intalling Windows x64 on a P4 Prescott
Hi All,
I'm currently attempting to install the Windows Server 2003 x64 Enterprise
Edition 180-day evaluation on a computer that has a Pentium 4 Prescott CPU
(x86 Family 15 Model 3 Stepping 4 GenuineIntel)
The machine is currently running WinXP Pro 32-bit and I created a seperate
NTFS partition ready to receive Windows Server 2003 x64. All partitions on
the machine are NTFS. I set the machine to boot from the Installation CD and
upon booting, I get the error: "Attempting to load an x64 operating system,
however this CPU is not compatible with x64 mode. Please install a 32-bit x86
operating system."
The Pentium 4 Prescott CPU supports EM64T. Could the problem be the BIOS and
if not, what other steps could I take to determine the root of the problem?
Any insight is much appreciated.
Best regards,
Matoos Tag: x64 with German MUI available by atelco Tag: 9926
Outlook 2003 account configuration fails
On a clean installation of Windows xp x64 and the "typical" Office 2003
installation including Outlook, all programs run fine except Outlook 2003.
The first time calling Outlook it starts creating the outlook data file ...
and fails! I heard rumours that this might be due to the fact that I have 4
GB RAM... but of course I do not want to uninstall my memory because I bought
it on purpose to do CAD. Are there any known work-arounds or chances that
Outlook will get a fix?
Would really be great to be able running Outlook under xp 64...
Thanks a lot! Tag: x64 with German MUI available by atelco Tag: 9923
32-bit games on 64-bit Windows...
Anyone labouring under the impression that Windows XP x64 will run their
games any faster should read these two reviews:
http://www.techgage.com/review.php?id=1434&page=1
http://www.simhq.com/_technology/technology_043b.html
I hope it goes without saying that I am not criticising the OS itself or
those who have chosen to participate in the trial and advance releases.
However it does seem that this release is not as backwards compatible as many
will expect.
It is also somewhat dispiriting to learn that , so far, the only games that
claim to take advantage of Windows XP x64 actually run significantly slower
when put to the test. Hopefully this is merely the result of developer
inexperience. Tag: x64 with German MUI available by atelco Tag: 9922
RTM 64-bit Server 2003 NIC issues
This message is about getting a test machine up using RTM Server 2003
64-bit.
Hardware: Asus K8v Deluxe (not the SE version). The on-board ethernet
port worked on a beta version of XP 64-bit (w/hacked driver) and on a
64-bit Linux version. At some point it broke. Drivers would see it but
it would not talk over the wire. I have been using PCI NICs to network
32-bit OS versions ever since.
With RTM Server 2003 out, I'd like to go back to 64-bit.
OS: Server 2003 64-bit version (the currently downloadable bits I
think) "About" shows Version 5.2 (Build 3790.srv03_sp1_rtm.050324-1447
: Service Pack 1)
With above OS, I am unable to find any combination of driver and a
half dozen or so different PCI NICs that work. I re-enabled the broken
onboard interface just to see if the OS would load a driver for it.
Checked Asus's site and installed the latest stuff marked AMD64. No
luck.
Question: Anybody know what brand/model NIC (for PCI bus) I should buy
to make this box work? 10/100 mbs is good.
So far, I haven't seen any indication that this OS release has *any*
network drivers in it. (Device manager, choose from list, network
adaptor = empty list)
I'm aware of the 'decorated inf' issue but rather not hack another
driver/inf. Is there anything out-of-the-box that works?
Suggestions welcomed
Regards,
Mickey. Tag: x64 with German MUI available by atelco Tag: 9919
NTLDR Missing
I have recently installed x64, and if i boot without the CD in the drive i
get this message, if i boot with it in the drive, all works as it should.
This may or may not have something to do with the fact that the Boot and
system volumes are on different drives. the boot on a SATA and the system
not. Even if this isnt the problem i would like to re-unite the system and
boot volumes onto the one drive, is this possible?
Any help on these 2 questions would be great, Thanks Tag: x64 with German MUI available by atelco Tag: 9905
HELP!! OpenGL woes on WS2003 x64!
Hi all..
I just got my version of Windows Server 2003 x64 finally (I'm a high school
graduate trying to learn the ropes to eventually pursue certifcations..) but
I'm having a problem..
Here is my full system specs:
AMD64 3500+ Socket 939
ABIT AV8 Motherboard
1024 OCZ Platinum Dual Channel RAM (2-2-2-5)
BFG 6800GT OC Video Card (256MB, GeForce4)
Twin WD Raptor 74gb's
So, I just installed it, and I also installed the newest drivers for my
version of Windows Server 2003 x64 from nvidia.com, and it works absolutely
great for the desktop, but it seems my OpenGL programs aren't working!
I've tried various programs that use OpenGL (Quake 1 & 2, other various
OpenGL games/applications) and they all fail to switch from software
rendering into OpenGL mode..
Now, I know that obviously Windows Server is not meant to game on (which is
why I still dual boot 32bit XP) but regardless, OpenGL should be working,
and although gaming isn't the greatest idea, there is no reason why I
shouldn't be able to enjoy a game of classic Quake 2 once and a while when
I'm bored :[
Can someone please give me ANY reccomendations and/or suggestions on what I
should do now? Maybe suggest some more things I can do to see if my
DirectX/OpenGL is functioning, etc..
I'm at a total loss, and I have nothing but respect for all of the good
advice from you professionals, so, THANKS IN ADVANCE! :D
-Ryan Tag: x64 with German MUI available by atelco Tag: 9893
64 bit security and networks
Routing table in the router does not show 64bit architecture for either Win
XP Pro64 or 32 bit. When Win64 bit accesses the win2003 server (32bit) data
can be exchanged only from server to xp 64 bit and not the other way. Server
rejects the request if Win64 tries to store data on the server. This is also
the case with WinXP Pro 32bit is networked to Win64 bit.
Also the network node can not be disabled.
This is interesting in that it appears that a conflict exists between IPv6
and IPv4.
I am wondering if anyone else has similar experiences.
For all of those that are using Canon printers, Canon has informed me that
drivers 964bit) are currently being written for newer versions of printers. Tag: x64 with German MUI available by atelco Tag: 9892
lsass on first boot after install
After I install all drivers and finish a complete new install of windows XP
Pro 64 OEM disk, durning the next boot I get that the password does not
match. No password was installed during setup, raid drivers were installed
from asus web site onto a floppy. My setup is a asus A8N-E motherboard with 2
gigs of ram, two 36 gig raptors (which are my only drives). I have read that
this might be a virus or a problem with windows not being on drive C.
--
Scott the Desert Rat Tag: x64 with German MUI available by atelco Tag: 9891
Hi all,
for all those are interested in: in Germany x64 is available by atelco
computer stores. I bought it in June without hardware.
"Lutz Koenig" <lukoe@web.de> wrote in message
news:%23vmoBLrjFHA.3144@TK2MSFTNGP12.phx.gbl...
> Hi all,
>
> for all those are interested in: in Germany x64 is available by atelco
> computer stores. I bought it in June without hardware.
>
> Lutz