video card help please

I have windows xp x64 edition
I have just installed radeon 9250

Installation went smooth.

Just in case I installed drivers from the website anyway.
During that installation it said
Missing WIA
No idea as to what that is.
Anyway it finished the installation without stopping so I think it's
not that critical.

Ok now for the biggest question of them all.
When I change the monitor from the intergraded motherboard vga to the
radeon my monitor stops responding. What should I do?

Tony
Wed Feb 27 13:16:55 PST 2008

First, make sure the motherboard chip is disabled in yoour BIOS Setup!


Tony. . .


"whatever" <yadalda@gmail.com> wrote in message
news:6cfa53c6-e881-4ecc-b729-5aaeebbaa203@d4g2000prg.googlegroups.com...
>I have windows xp x64 edition
> I have just installed radeon 9250
>
> Installation went smooth.
>
> Just in case I installed drivers from the website anyway.
> During that installation it said
> Missing WIA
> No idea as to what that is.
> Anyway it finished the installation without stopping so I think it's
> not that critical.
>
> Ok now for the biggest question of them all.
> When I change the monitor from the intergraded motherboard vga to the
> radeon my monitor stops responding. What should I do?

Carlos
Wed Feb 27 16:11:00 PST 2008

That would be "graphic chipset in the motherboard" as opposed to the
"motherboard chip".
:)
The OP might be stuck trying to pull out the BIOS chip!
:)))))
Carlos

"Tony Sperling" wrote:

> First, make sure the motherboard chip is disabled in yoour BIOS Setup!
>
>
> Tony. . .
>
>
> "whatever" <yadalda@gmail.com> wrote in message
> news:6cfa53c6-e881-4ecc-b729-5aaeebbaa203@d4g2000prg.googlegroups.com...
> >I have windows xp x64 edition
> > I have just installed radeon 9250
> >
> > Installation went smooth.
> >
> > Just in case I installed drivers from the website anyway.
> > During that installation it said
> > Missing WIA
> > No idea as to what that is.
> > Anyway it finished the installation without stopping so I think it's
> > not that critical.
> >
> > Ok now for the biggest question of them all.
> > When I change the monitor from the intergraded motherboard vga to the
> > radeon my monitor stops responding. What should I do?
>
>
>

Tony
Wed Feb 27 16:24:55 PST 2008

Good point! That would not help much.

I should really try and make an effort and re-phrase before I phrase in the
future.


Tony. . .


"Carlos" <Carlos@discussions.microsoft.com> wrote in message
news:7874B174-D70A-4EB8-8ED9-2BC64854E010@microsoft.com...
> That would be "graphic chipset in the motherboard" as opposed to the
> "motherboard chip".
> :)
> The OP might be stuck trying to pull out the BIOS chip!
> :)))))
> Carlos
>
> "Tony Sperling" wrote:
>
>> First, make sure the motherboard chip is disabled in yoour BIOS Setup!
>>
>>
>> Tony. . .
>>
>>
>> "whatever" <yadalda@gmail.com> wrote in message
>> news:6cfa53c6-e881-4ecc-b729-5aaeebbaa203@d4g2000prg.googlegroups.com...
>> >I have windows xp x64 edition
>> > I have just installed radeon 9250
>> >
>> > Installation went smooth.
>> >
>> > Just in case I installed drivers from the website anyway.
>> > During that installation it said
>> > Missing WIA
>> > No idea as to what that is.
>> > Anyway it finished the installation without stopping so I think it's
>> > not that critical.
>> >
>> > Ok now for the biggest question of them all.
>> > When I change the monitor from the intergraded motherboard vga to the
>> > radeon my monitor stops responding. What should I do?
>>
>>
>>

Carlos
Wed Feb 27 16:48:03 PST 2008

You mean... read again after the Glenfoyle?
I'm on 100 Pipers right now (wife is 2000 miles away!)
:)
Carlos

"Tony Sperling" wrote:

> Good point! That would not help much.
>
> I should really try and make an effort and re-phrase before I phrase in the
> future.
>
>
> Tony. . .
>
>
> "Carlos" <Carlos@discussions.microsoft.com> wrote in message
> news:7874B174-D70A-4EB8-8ED9-2BC64854E010@microsoft.com...
> > That would be "graphic chipset in the motherboard" as opposed to the
> > "motherboard chip".
> > :)
> > The OP might be stuck trying to pull out the BIOS chip!
> > :)))))
> > Carlos
> >
> > "Tony Sperling" wrote:
> >
> >> First, make sure the motherboard chip is disabled in yoour BIOS Setup!
> >>
> >>
> >> Tony. . .
> >>
> >>
> >> "whatever" <yadalda@gmail.com> wrote in message
> >> news:6cfa53c6-e881-4ecc-b729-5aaeebbaa203@d4g2000prg.googlegroups.com...
> >> >I have windows xp x64 edition
> >> > I have just installed radeon 9250
> >> >
> >> > Installation went smooth.
> >> >
> >> > Just in case I installed drivers from the website anyway.
> >> > During that installation it said
> >> > Missing WIA
> >> > No idea as to what that is.
> >> > Anyway it finished the installation without stopping so I think it's
> >> > not that critical.
> >> >
> >> > Ok now for the biggest question of them all.
> >> > When I change the monitor from the intergraded motherboard vga to the
> >> > radeon my monitor stops responding. What should I do?
> >>
> >>
> >>
>
>
>

Tony
Wed Feb 27 17:43:36 PST 2008

By a strange coincident, I did have a sip of that Glenfoyle today - I cannot
afford to be particular, on a normal day slavewhisky will do. The Isle of
Islay variety is for special occasions. [Very special!]

2000 miles? That BA? Your feeling safe? Could be a deceptive silence, you're
having, mate?

Tony. . .


"Carlos" <Carlos@discussions.microsoft.com> wrote in message
news:881214A3-2E94-4BA9-85C3-A755FBA18A6C@microsoft.com...
> You mean... read again after the Glenfoyle?
> I'm on 100 Pipers right now (wife is 2000 miles away!)
> :)
> Carlos
>
> "Tony Sperling" wrote:
>
>> Good point! That would not help much.
>>
>> I should really try and make an effort and re-phrase before I phrase in
>> the
>> future.
>>
>>
>> Tony. . .
>>
>>
>> "Carlos" <Carlos@discussions.microsoft.com> wrote in message
>> news:7874B174-D70A-4EB8-8ED9-2BC64854E010@microsoft.com...
>> > That would be "graphic chipset in the motherboard" as opposed to the
>> > "motherboard chip".
>> > :)
>> > The OP might be stuck trying to pull out the BIOS chip!
>> > :)))))
>> > Carlos
>> >
>> > "Tony Sperling" wrote:
>> >
>> >> First, make sure the motherboard chip is disabled in yoour BIOS Setup!
>> >>
>> >>
>> >> Tony. . .
>> >>
>> >>
>> >> "whatever" <yadalda@gmail.com> wrote in message
>> >> news:6cfa53c6-e881-4ecc-b729-5aaeebbaa203@d4g2000prg.googlegroups.com...
>> >> >I have windows xp x64 edition
>> >> > I have just installed radeon 9250
>> >> >
>> >> > Installation went smooth.
>> >> >
>> >> > Just in case I installed drivers from the website anyway.
>> >> > During that installation it said
>> >> > Missing WIA
>> >> > No idea as to what that is.
>> >> > Anyway it finished the installation without stopping so I think it's
>> >> > not that critical.
>> >> >
>> >> > Ok now for the biggest question of them all.
>> >> > When I change the monitor from the intergraded motherboard vga to
>> >> > the
>> >> > radeon my monitor stops responding. What should I do?
>> >>
>> >>
>> >>
>>
>>
>>

whatever
Wed Feb 27 21:21:54 PST 2008

On Feb 27, 12:23=A0pm, whatever <yada...@gmail.com> wrote:
> I have windows xp x64 edition
> I have just installed radeon 9250
>
> Installation went smooth.
>
> Just in case I installed drivers from the website anyway.
> During that installation it said
> Missing WIA
> No idea as to what that is.
> Anyway it finished the installation without stopping so I think it's
> not that critical.
>
> Ok now for the biggest question of them all.
> When I change the monitor from the intergraded motherboard vga to the
> radeon my monitor stops responding. What should I do?

um ok how do i go about doing that
i went to my bios
all i had was increase or decrease shared ram
btw it is set to 32 mb and it goes to 256

i tryed to plug in the vga to the graphics card again.
well i know what happened but i don't know how to fix this.
it assumes i want to extend my monitor it is acting as a second
monitor display.
how to i fix that?

Carlos
Thu Feb 28 01:18:00 PST 2008

Hi,
Usually BIOSes have an option for disabling the onboard video.
Check your motherboard's user manual for that info.
What motherboard (model, manufacturer) are you using?
Carlos

"whatever" wrote:

> On Feb 27, 12:23 pm, whatever <yada...@gmail.com> wrote:
> > I have windows xp x64 edition
> > I have just installed radeon 9250
> >
> > Installation went smooth.
> >
> > Just in case I installed drivers from the website anyway.
> > During that installation it said
> > Missing WIA
> > No idea as to what that is.
> > Anyway it finished the installation without stopping so I think it's
> > not that critical.
> >
> > Ok now for the biggest question of them all.
> > When I change the monitor from the intergraded motherboard vga to the
> > radeon my monitor stops responding. What should I do?
>
> um ok how do i go about doing that
> i went to my bios
> all i had was increase or decrease shared ram
> btw it is set to 32 mb and it goes to 256
>
> i tryed to plug in the vga to the graphics card again.
> well i know what happened but i don't know how to fix this.
> it assumes i want to extend my monitor it is acting as a second
> monitor display.
> how to i fix that?
>

Carlos
Thu Feb 28 01:19:00 PST 2008

She stayed in Buenos Aires an additional two weeks with our daughter that is
living there.
:)
Carlos

"Tony Sperling" wrote:

> By a strange coincident, I did have a sip of that Glenfoyle today - I cannot
> afford to be particular, on a normal day slavewhisky will do. The Isle of
> Islay variety is for special occasions. [Very special!]
>
> 2000 miles? That BA? Your feeling safe? Could be a deceptive silence, you're
> having, mate?
>
> Tony. . .
>
>
> "Carlos" <Carlos@discussions.microsoft.com> wrote in message
> news:881214A3-2E94-4BA9-85C3-A755FBA18A6C@microsoft.com...
> > You mean... read again after the Glenfoyle?
> > I'm on 100 Pipers right now (wife is 2000 miles away!)
> > :)
> > Carlos
> >
> > "Tony Sperling" wrote:
> >
> >> Good point! That would not help much.
> >>
> >> I should really try and make an effort and re-phrase before I phrase in
> >> the
> >> future.
> >>
> >>
> >> Tony. . .
> >>
> >>
> >> "Carlos" <Carlos@discussions.microsoft.com> wrote in message
> >> news:7874B174-D70A-4EB8-8ED9-2BC64854E010@microsoft.com...
> >> > That would be "graphic chipset in the motherboard" as opposed to the
> >> > "motherboard chip".
> >> > :)
> >> > The OP might be stuck trying to pull out the BIOS chip!
> >> > :)))))
> >> > Carlos
> >> >
> >> > "Tony Sperling" wrote:
> >> >
> >> >> First, make sure the motherboard chip is disabled in yoour BIOS Setup!
> >> >>
> >> >>
> >> >> Tony. . .
> >> >>
> >> >>
> >> >> "whatever" <yadalda@gmail.com> wrote in message
> >> >> news:6cfa53c6-e881-4ecc-b729-5aaeebbaa203@d4g2000prg.googlegroups.com...
> >> >> >I have windows xp x64 edition
> >> >> > I have just installed radeon 9250
> >> >> >
> >> >> > Installation went smooth.
> >> >> >
> >> >> > Just in case I installed drivers from the website anyway.
> >> >> > During that installation it said
> >> >> > Missing WIA
> >> >> > No idea as to what that is.
> >> >> > Anyway it finished the installation without stopping so I think it's
> >> >> > not that critical.
> >> >> >
> >> >> > Ok now for the biggest question of them all.
> >> >> > When I change the monitor from the intergraded motherboard vga to
> >> >> > the
> >> >> > radeon my monitor stops responding. What should I do?
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>

Ralph
Thu Feb 28 06:09:10 PST 2008

Oh, I like this question, because I've done it, and so have a lot of people.

When you do all the driver transfers, you need to move the video plug from
the socket on the systemboard, to the socket on the graphics card!


"whatever" <yadalda@gmail.com> wrote in message
news:6cfa53c6-e881-4ecc-b729-5aaeebbaa203@d4g2000prg.googlegroups.com...
>I have windows xp x64 edition
> I have just installed radeon 9250
>
> Installation went smooth.
>
> Just in case I installed drivers from the website anyway.
> During that installation it said
> Missing WIA
> No idea as to what that is.
> Anyway it finished the installation without stopping so I think it's
> not that critical.
>
> Ok now for the biggest question of them all.
> When I change the monitor from the intergraded motherboard vga to the
> radeon my monitor stops responding. What should I do?

vidmark
Sun Mar 02 07:38:46 PST 2008

Was it necessary then to post this? I think not. Why then don't we keep the
bullshit out of the newsgroups? Thank you.



"Tony Sperling" <tony.sperling@dbREMOVEmail.dk> wrote in message
news:uIuuZBaeIHA.1212@TK2MSFTNGP05.phx.gbl...
> Good point! That would not help much.
>
> I should really try and make an effort and re-phrase before I phrase in
> the future.
>
>
> Tony. . .
>
>
> "Carlos" <Carlos@discussions.microsoft.com> wrote in message
> news:7874B174-D70A-4EB8-8ED9-2BC64854E010@microsoft.com...
>> That would be "graphic chipset in the motherboard" as opposed to the
>> "motherboard chip".
>> :)
>> The OP might be stuck trying to pull out the BIOS chip!
>> :)))))
>> Carlos
>>
>> "Tony Sperling" wrote:
>>
>>> First, make sure the motherboard chip is disabled in yoour BIOS Setup!
>>>
>>>
>>> Tony. . .
>>>
>>>
>>> "whatever" <yadalda@gmail.com> wrote in message
>>> news:6cfa53c6-e881-4ecc-b729-5aaeebbaa203@d4g2000prg.googlegroups.com...
>>> >I have windows xp x64 edition
>>> > I have just installed radeon 9250
>>> >
>>> > Installation went smooth.
>>> >
>>> > Just in case I installed drivers from the website anyway.
>>> > During that installation it said
>>> > Missing WIA
>>> > No idea as to what that is.
>>> > Anyway it finished the installation without stopping so I think it's
>>> > not that critical.
>>> >
>>> > Ok now for the biggest question of them all.
>>> > When I change the monitor from the intergraded motherboard vga to the
>>> > radeon my monitor stops responding. What should I do?
>>>
>>>
>>>
>
>

vidmark
Sun Mar 02 07:41:04 PST 2008

Here we go again... What does this post have to do with "video card help"?
Damn fucktards.


"Tony Sperling" <tony.sperling@dbREMOVEmail.dk> wrote in message
news:OXWaZtaeIHA.4464@TK2MSFTNGP02.phx.gbl...
> By a strange coincident, I did have a sip of that Glenfoyle today - I
> cannot afford to be particular, on a normal day slavewhisky will do. The
> Isle of Islay variety is for special occasions. [Very special!]
>
> 2000 miles? That BA? Your feeling safe? Could be a deceptive silence,
> you're having, mate?
>
> Tony. . .
>
>
> "Carlos" <Carlos@discussions.microsoft.com> wrote in message
> news:881214A3-2E94-4BA9-85C3-A755FBA18A6C@microsoft.com...
>> You mean... read again after the Glenfoyle?
>> I'm on 100 Pipers right now (wife is 2000 miles away!)
>> :)
>> Carlos
>>
>> "Tony Sperling" wrote:
>>
>>> Good point! That would not help much.
>>>
>>> I should really try and make an effort and re-phrase before I phrase in
>>> the
>>> future.
>>>
>>>
>>> Tony. . .
>>>
>>>
>>> "Carlos" <Carlos@discussions.microsoft.com> wrote in message
>>> news:7874B174-D70A-4EB8-8ED9-2BC64854E010@microsoft.com...
>>> > That would be "graphic chipset in the motherboard" as opposed to the
>>> > "motherboard chip".
>>> > :)
>>> > The OP might be stuck trying to pull out the BIOS chip!
>>> > :)))))
>>> > Carlos
>>> >
>>> > "Tony Sperling" wrote:
>>> >
>>> >> First, make sure the motherboard chip is disabled in yoour BIOS
>>> >> Setup!
>>> >>
>>> >>
>>> >> Tony. . .
>>> >>
>>> >>
>>> >> "whatever" <yadalda@gmail.com> wrote in message
>>> >> news:6cfa53c6-e881-4ecc-b729-5aaeebbaa203@d4g2000prg.googlegroups.com...
>>> >> >I have windows xp x64 edition
>>> >> > I have just installed radeon 9250
>>> >> >
>>> >> > Installation went smooth.
>>> >> >
>>> >> > Just in case I installed drivers from the website anyway.
>>> >> > During that installation it said
>>> >> > Missing WIA
>>> >> > No idea as to what that is.
>>> >> > Anyway it finished the installation without stopping so I think
>>> >> > it's
>>> >> > not that critical.
>>> >> >
>>> >> > Ok now for the biggest question of them all.
>>> >> > When I change the monitor from the intergraded motherboard vga to
>>> >> > the
>>> >> > radeon my monitor stops responding. What should I do?
>>> >>
>>> >>
>>> >>
>>>
>>>
>>>
>
>

Tony
Sun Mar 02 08:07:49 PST 2008

You may be right!


Tony. . .


"vidmark" <nospam@nospam.net> wrote in message
news:47caca06$0$30685$4c368faf@roadrunner.com...
> Was it necessary then to post this? I think not. Why then don't we keep
the
> bullshit out of the newsgroups? Thank you.
>
>
>
> "Tony Sperling" <tony.sperling@dbREMOVEmail.dk> wrote in message
> news:uIuuZBaeIHA.1212@TK2MSFTNGP05.phx.gbl...
> > Good point! That would not help much.
> >
> > I should really try and make an effort and re-phrase before I phrase in
> > the future.
> >
> >
> > Tony. . .
> >
> >
> > "Carlos" <Carlos@discussions.microsoft.com> wrote in message
> > news:7874B174-D70A-4EB8-8ED9-2BC64854E010@microsoft.com...
> >> That would be "graphic chipset in the motherboard" as opposed to the
> >> "motherboard chip".
> >> :)
> >> The OP might be stuck trying to pull out the BIOS chip!
> >> :)))))
> >> Carlos
> >>
> >> "Tony Sperling" wrote:
> >>
> >>> First, make sure the motherboard chip is disabled in yoour BIOS Setup!
> >>>
> >>>
> >>> Tony. . .
> >>>
> >>>
> >>> "whatever" <yadalda@gmail.com> wrote in message
> >>>
news:6cfa53c6-e881-4ecc-b729-5aaeebbaa203@d4g2000prg.googlegroups.com...
> >>> >I have windows xp x64 edition
> >>> > I have just installed radeon 9250
> >>> >
> >>> > Installation went smooth.
> >>> >
> >>> > Just in case I installed drivers from the website anyway.
> >>> > During that installation it said
> >>> > Missing WIA
> >>> > No idea as to what that is.
> >>> > Anyway it finished the installation without stopping so I think it's
> >>> > not that critical.
> >>> >
> >>> > Ok now for the biggest question of them all.
> >>> > When I change the monitor from the intergraded motherboard vga to
the
> >>> > radeon my monitor stops responding. What should I do?
> >>>
> >>>
> >>>
> >
> >
>
>