msdn.microsoft.com goes to www.optronics.com through 64.252.62.40

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Dual boot x64 and x32? I would like to set my system up to boot XP (or Windows 2003) x64 on one disk and x32 on another. So far I have been unsucessful. This is my third try. I installed XP x64 and then tried to install XP x32. During the installation (of the 32 bit XP) I was prompted for a drive to install on I had to insert drivers for the drive (32 bit drivers) and only one drive showed up so I installed on that one (my thinking was that since x64 was on the other drive that was why it was not showing up). After the installation I just had the x32 XP with no dual boot. Then I thought maybe this is a feature (x64 and x32 dual boot) that was added in later so I tried to install the x64 version of the OS again I supplied the 64 bit drivers and was presented with just one drive to install on. Again I made the assumption that I could not see the x32 because the x64 drivers wouldn't let me. I installed the x64 OS and the x32 OS was wiped out. So I have these questions. I physically have two drives, regardless of the drivers that I have installed what drives should I see during installation? Can I have this type of dual boot (x64 on one drive and x32 on another both with the same controller)? Thank you. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10545
  - 2
    - microsoft update site not working I am not sure why but the MS update website is not working for me. I have a fresh install of the 180 day trail and I am waiting for the non-trail version. I just want to make sure everything is good to go with windows. I just go to the site and the Checking for the latest updates for your computer... never stops. What could be wrong? Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10532
  - 3
    - Upgrading from 32-bit to 64-bit XP Hi, I'm thinking of upgrading my 32-bit xp to 64-bit through the Technology Advancement Program, but a couple of my devices don't have 64-bit drivers available for them yet. Anyone know if under the terms of the upgrade I can request my upgrade now and get the CD, and then wait a couple of months before I install it? Or would this be a breach of the licence? Thanks for any help. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10514
  - 4
    - Cannot boot at all; not even in safe mode! Ahoy! Until upgrading to the full version, 64-bit was working fine (the trial version, that is). Now that I have obtained the full version of it, it won't boot up AT ALL! This is really starting to get at me since I have bought a 250gb HDD dedicated to the x64 platform. I have tried installing two different copies of x64 (one being my friends copy and the other mine) onto 1. a partitioned hard drive; 2. a completely different hard drive. What I don't understand is why the trial version ran fine and the full version does not even boot! It just simply reboots after I select it from the boot menu (ie, selecting which version of Windows to run). I have an AMD 64-bit 3200 processor; 1GB RAM; ATI Radeon X800PRO (overclocked in Windows 32-bit with ATI Tool but the overclocking is only done IN Windows not at start up); two Seagate Barracuda 7200rpm HDD's (200gb/250gb); and an ASUS K8V SE Deluxe. I have no idea as to what's going on. So far, I have wiped the hard drive/partition 3 times and done re-installs of Windows. The BSOD error is as follows: ***STOP:0x0000007B (0xFFFFFADFE480F3C0, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000) I have searched this page: http://support.microsoft.com/default.aspx?scid=kb;en-us;324103 but it doesn't seem to help me very much. I also googled the error code and still I find nothing! Can anyone please help me (possibly the developers of x64-bit..surely they would know what the error code stands for) Thanks in advance, JimmY! :D Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10501
  - 5
    - Anti-Virus what antivirus could I use in Win x64? *one with real time protection... Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10498
  - 6
    - 4 gb of ram not detected My Windows Xp Home Edition didn't detect my 4 gb ram. It only detected 2,75 gb. Because of this I downloaded the Windows Professional x64 Trial and installed it as dual boot. But this System also only does detect 2,75 gb of ram. My Bios detecteds the 4gb of ram correctly. Sorry for my bad englisch. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10495
  - 7
    - Write CDs now works in 64 bit Try Write CDs, works great in 64 bit. http://www.backtec.com/writecds.htm Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10481
  - 8
    - Installshield Error Message I am trying to install a print server with a SETUP.exe that bears a copyright date of 1997. I get an error message, 105, that reads that setup cannot find install languages in setup.lid. There is no .lid file, of course. Any help or suggestions would be appreciated. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10474
  - 9
    - EZ trust Antivirus x64 Downloaded the x64 version of EZ trust antivirus and updated it to current but, the Microsoft Security Center refuses to except thatat it is installed and says that there is no antivirus installed. Richard Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10473
  - 10
    - exchange costs? what is the cost of exchanging the products over, i recently bought my copy of wxp. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10451
  - 11
    - Final Thoughts.. (LONG) As I get older, I learn more and having passed birthday number 35 for the second time <g> last month here's some things I've learned in the last year: I've learned that I'm not going to see 64 bit drivers for my Canon S900, Canon has pretty much said so. I'll need to buy a later model photo printer and I'm unwilling to do that. I've learned I'm probably not going to see Logitech issue a 64 bit version of Mouseware in the near future, that project seems far off. Neither am I going to see Microsoft drop their insane phobia against using the middle mouse button any time soon so I can't substitute MSFT drivers for my mouse. That's OK, MSFT drivers never worked as well as Logitech but I really NEED that middle button to double click and third party software isn't as neat and clean as Logitech's Mouseware. I've learned I have no tolerance for the missing features of X64 that XP includes so.... It's gone. Drive H is re-formatted and the boot menu now leaves only XP and Mandriva Linux. When I stumbled across the first reference to X64 on AMD's site, when I immediately logged on to NewEgg and ordered a 64bit motherboard and chip, when they arrived and I assembled my upgraded computer and downloaded the early version of X64, believe me, I had absolutely NO idea it was going to whip me and I'd have argued with anyone who would have told me Linux 64 bit would work for me and Windows X64 wouldn't! I'm still a bit shocked but that's the way it is.... So it's back to XP, the 32 bit version while I continue to attempt to learn Linux and while I wait for the OS formerly known as Longhorn and see what it offers. I've been amazed at how much help this group (and the previous group) has been and how effectively you folks have ferreted out drivers and applications. I've been even more amazed as the patience of Mike Brannagan as he answers the same question for the umpteenth time! One last word, Andre, you do NOT have to answer every single post here! Really, you don't. And quit plagiarizing Mike before he loses some of that patience, OK? ;-) I won't be gone, I'll check in from time to time but since it's been months since I've even tried to use X64 I'm afraid I'm of almost no help here so it may not be often. You guys play nice now! -- David R. Norton MVP <d_r_norton@yahoo.com> Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10445
  - 12
    - Waiting for order...to death. Hello, im waiting for my order now for over 5 Weeks. Nothing changed..Recieved and will be charged when delivering. Yawn...probaly 2017... Daniel Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10441
  - 13
    - USB Driver Loss on Shutdown I recently assembled a system using a Foxconn MOBO (NF4UK8AA) and an Athlon 64 Venice Core CPU. I updated all the device drivers. The only hardware that I have a problem with is the Mitsumi FDD/Flash Memory reader (FA404M). The FDD works fine and the Flash reader installed correctly the first time. The icons showed under "My Computer", Life was good. When the system went into hibernation or shut down the drivers were lost and I got an "unkown device" in the System Manager. It would not allow a new driver to be installed, the only solution was the change the position on the MOBO of the USB connection for the Flash Reader portion of the drive. I partially fixed the problem by unckecking the "allow computer to turn off this device to save power" in the USB root hub. I still loose the flash media USB drivers when the system is shut down for an extended period of time. Any suggestions? Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10408
  - 14
    - RAID Driver Problem The is a repost for two reasons the big one is I made a mistake trying to reply to one of the replies to my original post and got the post flagged as answered. Also I have done some more work on the problem and I am fairly sure that Iâ??m doing something wrong or the RAID Drivers are the problem. I have the following new computer hardware and canâ??t get Windows XP Pro x64 Edition installed using the 2 hard drives configured as RAID 0. Without using the nVIDIA nForce4 RAID chipset controller, XP x64 installs smoothly on the same 2 SATA hard drives and runs fine. (1) Thermaltake Tsunami VA3000 Series case. (2) Thermaltake Purge Power TWV500W W0057 Power supply. (3) AMD Athlon 64 X2 4600+ (4) ASUS A8N-E Motherboard with BIOS Version 1005. (5) ASUS Video Graphics card EAX800XL/2DTV/256M/A (6) 2 MB DDR PC3200 Memory, Corsair TWINX2048-3200C2PRO, configured as Dual Channel. (7) 2 Western Digital 160GB SATA Hard Drive Configured as RAID 0, Drive WD SATA II P/N WD1600JS (8)CD\DVD Drive, Plextor SATA P/N: PX-716SA/SW. (9) Keyboard and Mouse are PS2 not USB. (10) LCD Monitor. Does any body have a RAID 0 configuration up and running with XP x64 and the ASUS A8N-E motherboard? If you do, can you tell me what you are using for RAID drivers and where you gone them. The 32 Bit RAID drivers that are on the CD that came with the motherboard work fine with Win XP Pro 32 Bit. But the 64 Bit Drives on the CD hangs the installation program as soon as it reads them from the RAID Driver floppy disk. The 64 Bit RAID drivers that are with nVIDIAâ??s nForce4 chipset driver set version 6.66 work a little better, but still cause the installation of XP x64 to fail. Computer does a hard reset during second reboot with no BSOD. Then goes directly to the same diagnostic screen you get if you press F8 during a normal Windows startup. If you try to startup Win XP x64 at that time in Safe Mode it displays the normal list of drives and software being loaded then halts and does a hard reset again. I have the computer up and running with no problems, on Win XP Pro x64, but with the same 2 hard drives NOT configured as a RAID drive set. Without using the RAID controller the installation of XP x64 went smoothly and Iâ??ve had no problem getting all of the other hardware drivers and software installed and working. Computer is stable and even attempts to confuse the OS and cause it to crash have only resulted in it telling me what I was doing is a NO, NO or displaying a message stating what ever I was messing with was having a problem and it would have to be shutdown and restarted. I've tried all the version of RAID drives on the ASUS A8N-E download page. Plus nVIDIA's latest, but I can't get through the XP x64 installation without the computer crashing. Iâ??ve redownloaded all drivers I have tried at lest twice from alternate sites and made new RAID Driver floppies each time with no effect on the problem. If anyone can tell me what Iâ??m doing wrong, please jump in. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10405
  - 15
    - Very Slow Transfer Speeds on Lan I have 1 Win X64 machine running on a peer-to-peer network with a 3Com 10/100 hub with multiple WinXP machines, and I have 1 process that I always run on X64 and it requires me to transfer large files (200mb-500mb) between the other 32 bit Win XP Pro machines. It can take 14-18 minutes to transfer a 400mb file either To or From X64. In the time it takes me to send 400mb either to/from X64 I can copy 17gb from WinXP Pro (32 bit) to an external firewire hdd. Seems drastically slower than it should be. No other speed problems anywhere on the lan. Net connections on X64 are fine too. The only thing I've tried is to turn off the firewall on X64 - firewall is off on all machines on my lan because it sits behind a hardware firewall - and it makes no difference with the speed. Do I have to be happy with this? Something going on that's not evident? Any suggestions? -- FrankB Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10402
  - 16
    - Beta Tester This is not really a Windows 64 bit question, but... Now that the new version of Windows has a name and the Beta is going to be released any day now, how does a person go about becoming a Beta tester? Thanks Greg Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10374
  - 17
    - Driver advice needed. My copy of x64 finally came in yesterday so I am looking to line up all the drivers I need. So far I've located drivers for: My processor and MB. Soundboard. Raid. Video Board. Epson r200 Photo Printer. Logitech Keyboard/mouse. HP's DVD burner with Lightscribe. Now all I need are drivers for: Epson 4180 Scanner. HP Laserjet 1012 (connected by IP) If there are no drivers available, can someone point me to a work around on these? Especially the printer. Thanks!!! Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10362
  - 18
    - TAP Installation Well I finally received my TAP cd via UPS on Thursday. I always hear that the trial version is the exact same as the final release so I thought I would share a couple of interesting tidbits. I did a clean in install on an existing partition that had the trial version. The first thing that struck me was that it took the TAP disk almost 2 hours to format the 40gig partition and install. The trial version did not take nearly that long maybe 45 minutes total. The next thing is that the trial version seemed to take a long time to render some web sites, for example it could take up to a minute to load usatoday on a 5MBPS cable connection whereas the TAP install handles those same sites as well and as fast as my old XP32. Any thoughts on why the difference? Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10352
  - 19
    - System Monitor Anyone know of a system monitor like Smart Guardian that will work in x64? Thanks for your help. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10339
  - 20
    - application error involving shmgrate.exe Have a problem. Have been successfully using evaluation CD with 3790 build. Bought OEM for final upgrade, accepted upgrade within the program, at the very end of installation, error message popped up, "application error shmgrate.exe at 0x01f00000, memory could not be written". Installation went on to complete, at end got BSOD, and program cycled back to setup for full version. Did same thing when trying to repair the eval version. Am using 430C SATA Raid drivers as were used successfully in eval version. Do not really want to clean install. Appreciate any assisstance. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10338
  - 21
    - x64 with German MUI available by atelco Hi all, for all those are interested in: in Germany x64 is available by atelco computer stores. I bought it in June without hardware. Lutz Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10333
  - 22
    - IntelXeon Vs Intel Itanium Hi All, How can I port 32 Bit driver to 64 Bit Intel Xeon ? Will Intel Itanium (IA64) driver work on Intel Xeon ? Which DDK should i use for Intel Xeon ? Please let me know. Thanks in Advance Mangesh Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10325
  - 23
    - CAPICOM for x64 Hello, a question concerning CAPICOM. The CAPICOM COM client provides services that enable application developers to add security based on cryptography to applications. CryptoAPI includes functionality for authentication using digital signatures, for enveloping messages, and for encrypting and decrypting data. We need this funktionality on Win PE for x64. But i can't find a CAPICOM.dll for x64. Neither on an intalled x64-System nor on the WIN PE 2005. Is there any chance that Microsoft allocates a 64-Bit capicom.dll in the near future? Many thanks, best regards, Joachim Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10320
  - 24
    - " Longhorn" to christened" Windows Vista" Is this new version of Windows 64bit? www.microsoft-watch.com -- Jesus is Lord Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10304
  - 25
    - ATI Control Panel I have installed the ATI Catalyst drivers (5.7) and Control Panel. But the control panel doesn't seem to start. Has anyone encountered this problem and does anyone know of a solution? Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10294
- Next
  - 1
    - Large SATA hard drive (250 gig) - XP64 Hey all, I have a new problem - After I installed XP 32-bit and then went back to XP 64-bit, all of a sudden my hard drive is limited to the old 130 gig thing. The XP-64 install only sees the 130 gig. How do I get my 250 gig hard drive to show up properly again? It is a Hitachi DeathStar SATA 250 gig drive Here's what I have tried: 1) boot up with an ME floppy, run fdisk, delete the unknown partition, and run the XP64 setup no luck 2) set in the bios from Auto to Large, on disk access no luck 3) enable/disable raid support in BIOS 4) look for the bigdrive (or whatever) registry entry, but it does not exits - and I think it is not supposed to in XP64, but I could be wrong. I could swear (but am starting to feel dillusional) that when I installed XP 64 fresh on the drive when it was brand new, that it saw all 250 gigs. I just don't know anymore. any ideas? Oh yeah, I also updated the BIOS Thanks, Shane Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10291
  - 2
    - 32 bit applications How do I run 32 bit applications on x64? I can't find much on "WOW"? Every 32 bit program that I try to install fails. Thanks JP Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10284
  - 3
    - Where are the display drivers? When installing the ATI display drivers, two display devices end up with no drivers. These are the NTAATIMD40 and NTAATIRV40 devices. Other posts have said to install the windows drivers using the manual install. However, I have no idea where these drivers are. A little help would be welcome. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10281
  - 4
    - address line A20 enabled every time i try to boot from the trial CD, i get this error and its quite annoying, does anyone have any solutions for this? system: amd64 3700+ 1gb mushkin ram in dual channel DFI lan party ut ultra-D nf4 motherboard gigabyte 6600gt 128mb 80gig maxtor hard drive. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10246
  - 5
    - RAW Image and Thumbnail Viewer I was wondering if anyone else was having problems installing this new PowerToy on x64? Is there a chance that the program will be made to run in an X64 environment? It would make sense 64-bit computing is used largely by the creative community. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10241
  - 6
    - Wireless Network Adapter Can anyone recommend a good 802.11g card for my 64-bit box. My D-Link does not have a driver available. In fact I am having trouble finding a card that has a driver for XP 64-bit from any manufacturer including Microsoft. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10237
  - 7
    - "Error Loading Operating System" After X64 CD Install and Reboot I recently purchased Microsoft Windows XP x64 Professional Edition for my computer that I built. It has a Intel Pentium 4 630 Prescott 3.0GHz Processor with hyper-threading and 64-bit abilities. After I booted the installation disk for Windows, formatted the hard drive (full format, not quick way), and it copied all of the necessary files... it rebooted the system. I ejected the CD so that the hard disk would boot... I get the error: "Error Loading Operating System". I tried reformatting the hard drive and starting the installation process over a couple times, same result. I read some other posts that are roughly similiar to mine and it seems everyone is having problems with their drivers and SATA drives, etc. I am just using an IDE ATA hard drive. The only hardware that I have connected to the motherboard are my ATI Radeon 9100 PCI graphics card, CD burner, and hard drive. Does anyone have any idea what may be causing my problem? Thanks! Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10223
  - 8
    - Sony CyberShot Drivers It says USB 2 Compatible & presumably no drivers should be needed but I'm getting the yellow icon & cant transfer images frm the cam to my machine Anyones been lucky so far ? Sony P73 Cybershot 4.1 Mega Winx64 (final) Thanks ]{artik Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10221
  - 9
    - Getting started with the xp-pro x64 3-month trial cd Hi, I have downloaded the xp-pro x64 trail iso image and burned to a cd. However the cd is not bootable, and I am trying to install the os on a completely new pc with an empty unformatted HDD. Can anyone help me get the installation started? Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10208
  - 10
    - USR Modem driver Some of you posted messages that their USR modem work OK in XP 64 Bit. I called USR pre-sales, one ignorant guy said it is no problem installing any of USR modems in 64 XP. So I went and bought USR5660a, but the thing would not install. Checked for 64 bit drivers, but non found. Called USR support, they apologized, and said they don't have any 64 bit drivers for any modem yet. I can wait, I use the modem for in case the DSL went down. I am curious how some the members were able to install the USR modem. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10197
  - 11
    - indeo codec for win64 anyone know if there's a way to get the indeo 5 codec working on win64? it looks like it does not come with win64 by default... it does not appear in system information->system summary->components->multimedia->video codecs i saw some related msdn/mskb articles about it being pulled from winxp sp1, and about ligos taking over support for it, but it was apparently re-added in winxp sp2 and there is a free download (Q327979) from microsoft which works on regular 32-bit winxp but does not work on my win64 system thank you! Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10193
  - 12
    - no win update/xp64 hiya i got an athlon 64 with dual win32/win64... it wont update at all...and as far as i can tell,theres no activex to autoupdate...(???) i have full internet funcionality...it just dont update...? help! Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10183
  - 13
    - EnumProcessModules() weirdness This is a question about running 32-bit applications on 64-bit machines. It's kind of tedious... 32-bit OS = Win XP Sp1 64-bit OS = RTM Standard Server 2003 Sp1 There's some example code that's been around for a long time that shows how to print the names of all the running processes on the system. It goes EnumProcesses() - OpenProcess() - EnumProcessModules() - GetModuleFileNameEx() - printf() I modified the example to not enumerate all of the component modules - I just want the executable name - and to put everything on one line. To compile on 32-bits, I use: 1) Visual Studio 6 2) The IFS DDK + 32-bit Platform SDK and the build utility (no difference in results) To compile on 64-bit, I use the 64-bit version of option 2 above. When I compile and run this on 32-bits, it mostly works. The few access denied errors are acceptable. When I copy the 32-bit image to the 64-bit machine, it mostly doesn't work. When I compile and run on 64-bits, it works. Three outputs below: ===== 32-bit image running on 32-bit machine ===== Process ID: 00004: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 00504: \SystemRoot\System32\smss.exe Process ID: 00552: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 00576: \??\F:\WINDOWS\system32\winlogon.exe Process ID: 00620: F:\WINDOWS\system32\services.exe Process ID: 00632: F:\WINDOWS\system32\lsass.exe Process ID: 00800: F:\WINDOWS\system32\Ati2evxx.exe Process ID: 00816: F:\WINDOWS\system32\svchost.exe Process ID: 00872: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 00940: F:\WINDOWS\System32\svchost.exe Process ID: 01012: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 01088: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 01276: F:\WINDOWS\system32\spoolsv.exe Process ID: 01452: F:\WINDOWS\system32\Ati2evxx.exe Process ID: 01532: F:\WINDOWS\Explorer.EXE Process ID: 01632: F:\Program Files\ATI Technologies\ATI Control Panel\atiptaxx.exe Process ID: 01640: F:\Program Files\Analog Devices\SoundMAX\SMax4PNP.exe Process ID: 01648: F:\Program Files\Analog Devices\SoundMAX\Smax4.exe Process ID: 01660: F:\Program Files\Intel\Intel(R) Active Monitor\imontray.exe Process ID: 01668: F:\Program Files\HP\hpcoretech\hpcmpmgr.exe Process ID: 01676: F:\Program Files\Roxio\Easy CD Creator 5\DirectCD\DirectCD.exe Process ID: 01684: F:\PROGRA~1\Lavasoft\AD-AWA~1\Ad-Watch.exe Process ID: 01692: F:\Program Files\HP\HP Software Update\HPWuSchd2.exe Process ID: 01700: F:\Program Files\Messenger\msmsgs.exe Process ID: 01708: F:\WINDOWS\system32\ctfmon.exe Process ID: 01740: F:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe Process ID: 01852: F:\WINDOWS\System32\drivers\CDAC11BA.EXE Process ID: 01876: F:\PowerPanelPlus\upssrv.exe Process ID: 01908: F:\WINDOWS\system32\inetsrv\inetinfo.exe Process ID: 01916: F:\PowerPanelPlus\upsio.exe Process ID: 01952: F:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe Process ID: 00136: F:\Program Files\Analog Devices\SoundMAX\SMAgent.exe Process ID: 00176: F:\WINDOWS\System32\svchost.exe Process ID: 00232: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 00416: F:\Program Files\Intel\Intel(R) Active Monitor\imonnt.exe Process ID: 02160: F:\WINDOWS\system32\wscntfy.exe Process ID: 02588: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 02792: F:\WINDOWS\System32\svchost.exe Process ID: 02180: F:\Program Files\Outlook Express\msimn.exe Process ID: 02780: F:\WINDOWS\system32\notepad.exe Process ID: 00128: F:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin\MSDEV.EXE Process ID: 03472: F:\WINDOWS\system32\cmd.exe Process ID: 02788: G:\Pid\objchk_wxp_x86\i386\Pid.exe ===== same 32-bit image running on 64-bit machine ===== Process ID: 00004: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 00360: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 00408: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 00432: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 00476: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 00488: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 00696: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 00764: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 00860: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 00896: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 00908: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 01036: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 01064: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 01188: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 01228: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 01288: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 01312: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 01340: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 01424: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 01524: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 01728: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 01952: E:\WINDOWS\SysWOW64\svchost.exe Process ID: 02012: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 00840: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 02212: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 02540: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 02684: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 02756: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 02184: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 01876: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 00392: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 02188: E:\Pid\32\objchk_wxp_x86\i386\Pid.exe ===== 64-bit image running on 64-bit machine ===== Process ID: 00004: *** EnumProcessModules() returns ERROR_PARTIAL_COPY Process ID: 00360: \SystemRoot\System32\smss.exe Process ID: 00408: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 00432: \??\E:\WINDOWS\system32\winlogon.exe Process ID: 00476: E:\WINDOWS\system32\services.exe Process ID: 00488: E:\WINDOWS\system32\lsass.exe Process ID: 00696: E:\WINDOWS\system32\svchost.exe Process ID: 00764: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 00860: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 00896: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 00908: E:\WINDOWS\System32\svchost.exe Process ID: 01036: E:\WINDOWS\system32\spoolsv.exe Process ID: 01064: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 01188: E:\WINDOWS\System32\dns.exe Process ID: 01228: E:\WINDOWS\System32\svchost.exe Process ID: 01288: E:\WINDOWS\system32\inetsrv\inetinfo.exe Process ID: 01312: E:\WINDOWS\system32\tcpsvcs.exe Process ID: 01340: E:\WINDOWS\system32\sfmsvc.exe Process ID: 01424: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 01524: E:\WINDOWS\System32\wins.exe Process ID: 01728: E:\WINDOWS\System32\svchost.exe Process ID: 01952: E:\WINDOWS\SysWOW64\svchost.exe Process ID: 02012: E:\WINDOWS\System32\svchost.exe Process ID: 00840: E:\WINDOWS\Explorer.EXE Process ID: 02212: E:\WINDOWS\System32\svchost.exe Process ID: 02540: E:\WINDOWS\system32\wuauclt.exe Process ID: 02684: *** OpenProcess() returns ERROR_ACCESS_DENIED Process ID: 02756: E:\WINDOWS\system32\wpabaln.exe Process ID: 02184: E:\WINDOWS\system32\cmd.exe Process ID: 01876: E:\WINDOWS\system32\cmd.exe Process ID: 00392: E:\WINDOWS\system32\cmd.exe Process ID: 00724: E:\Pid\64\objchk_wnet_amd64\amd64\Pid.exe Anybody have any suggestions as to why EnumProcesses() and OpenProcess() will work in either situation but EnumProcessModules() won't? Anybody have the ability to define ERROR_PARTIAL_COPY from EnumProcessModules()? Regards, Mickey. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10181
  - 14
    - Select Emulation Image Just installed my TAP copy, fresh install, the works, after rebooting a black console screen shows and prints the following message all down the screen Select Emulation Image: 1 Select Emulation Image: 2 Select Emulation Image: 3 Select Emulation Image: ... etc, uses numbers and symbols Boot Image: 0 hitting zero boots right in but why do i see this message at all and why can't i just have it boot it like normal? Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10174
  - 15
    - 50th State checking in... TAP delivery ...so my wife gets her usual UPS giant furniture delivery boxes from pottery barn or similar this afternoon. and there's a small envelope package...but I assume its all part of the set, as all it says is 'Fufillment Center' on the envelope. No microsoft, no zomax, no nothing. Like i ordered adult material, or regrow hair kit, viagra or something... So I'm on the sofa, watching Jenna Jameson on E! special...and then she comes home, and excitedly starts opening her packages, and says...'honey, did you order this?' ...and hands me x64! :) Talk about getting a double boner! anyways, its in a dvd clamshell and has a COA decal on the back which says to affix to your PC exterior: Windows XP Pro x64 Ed Tech Advancement OEM Software So is this the one that folks have been updating over their existing 180 day trial (build 3790) with success? If so, then I to will give it a go as well. order number was x0003211000** (last two digits replaced with **) it came via UPS 2nd day air from Fremont, CA. Hope you guys get yours soon! Then the discussions here should be more productive! Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10173
  - 16
    - Unknown Device in Device Manager - how to identify? In my x64 Device Manager under Other Devices I have an Unknown device (with the usual yellow question mark). On the Properities page, General Tab, under Location: on PCI bus. Under status "The drivers for this device are not installed. (Code 28)." On the Driver Tab, everything is Unknown or Not Available, etc. On the Details Tab the Device Instance Id is "ACPI\ATK0110\1010110 Hardware Id is "ATK0110 Several properties are blank Enumerator is ACPI Capabilities are "CM_DEVCAP_UNIQUEID" and "CM_DEVCAP_SILENTINSTALL" Devnode Flags are "DN_HAS_PROBLEM" "DN_DISABLEABLE" "DN_NT_ENUMERATOR" and "DN_NT_DRIVER" etc, etc. I am looking for tips on figuring out how to identify this unknown device so I can deal with it appropriately. There are no cards in the PCI slots (but I am aware that the PCI bus supprots many devices). WinXP Pro x64, AMD Athlon 64 x2, 2GB ram, ASUS A8N SLI Deluxe board, SATA Hitachi drives (not Raid), GeForce 6800 GT video on PCI Express. I suspect something like a fan sensor unplugged, but what do I know? Be happy to have suggestions from all you fine folks. Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10161
  - 17
    - How long till they ship full 64 bit I was just wondering what is the turn around time right now? I am just wondering if it still in the 4-6 week area before you get a tracking number. Thanks Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10157
  - 18
    - What happened to my TAP Shipment? Dear Microsoft, What happened to my TAP shipment? TAP Order Number: X0001929 UPS Tracking Number: 1Z0EA2290335480049 Sincerely, Kevin Panzke Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10151
  - 19
    - Computer Description Has anybody noticed that you can't change the computer description in Windows XP Professional x64 Edition? Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10150
  - 20
    - Received Notification Of TAP Shipment I haven't received the order, just the confirmation of shipment. Funny part is, The Order Status Login Still shows "Received Order, Will Bill When Shipped"...guess there's a lag between shipment and billing. Your order for the Microsoft Windows x64 Technology Advancement has shipped! Order Number: X1197XXXX 1Z0EA229033552XXXX Note: Duties and Taxes for shipments to non-US locations are the responsibility of the recipient. Thank you again for your order. Microsoft Windows x64 Technology Advancement Team 001710XXXX . MS64SI Al Swearengen Proprietor Gem Saloon Deadwood Dakota Territory POST ON Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10139
  - 21
    - Feel stupid for asking - What is TAP? Everybody seems to be anxiously awaiting it's arrival, and it's free. I feel like a dolt not knowing what it is. Can someone enlighten me so I can get in on the excitement? TIA Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10095
  - 22
    - Install Windows XP x64 Hello all, I just set up a new rig: ASUS A8V Deluxe, AMD 64 3200+, 1 GB Kingston, 80 GB Seagate SATA, 80 GB Maxtor EIDE, ATI Radeon 9600XT. I am installing Windows XP x64 on the SATA drive (connected to the VIA K8T800 Pro Controller). I succesfully used the F6 method to get Windows x64 to recognize the SATA drive using dirvers provided from ASUS. After selecting the SATA drive and formatting, Windows asks for a "VIA RAID Combo Driver Diskette" to be inserted in the floppy drive. I have tried what I thought was the right disk (VIA Hyperion Pro 0.99) to get past this issue, but this did not work. I am currently stuck here...I have no idea what to do now. Also, I should mention that Windows x64 recognizes the SATA drive when I install x64 on the IDE drive...I was reading/writing data from the SATA drive. So, the SATA drive works fine. Please HELP!!!!! Thanks, Francis Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10089
  - 23
    - TAP received in France/Europe Hello, I'm very pleased to announce the Group, and particularly my fellow Europeans, that I just received my TAP media this morning. BTW, my "official" online status still displays the famous message : "Order has been received. You will be charged at the time of order shipment". Furthermore, my credit card is still not charged at this very moment, LOL ! Thank you very, very, very much Microsoft and Zomax : this is the first time in my life that I receive a *legal* and *full* software for free ;) Cheers, Jean-Baptiste Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10077
  - 24
    - Cannot boot at all; not even safe mode. Ahoy! Until upgrading to the full version, 64-bit was working fine (the trial version, that is). Now that I have obtained the full version of it, it won't boot up AT ALL! This is really starting to get at me since I have bought a 250gb HDD dedicated to the x64 platform. I have tried installing two different copies of x64 (one being my friends copy and the other mine) onto 1. a partitioned hard drive; 2. a completely different hard drive. What I don't understand is why the trial version ran fine and the full version does not even boot! It just simply reboots after I select it from the boot menu (ie, selecting which version of Windows to run). I have an AMD 64-bit 3200 processor; 1GB RAM; ATI Radeon X800PRO (overclocked in Windows 32-bit with ATI Tool); two Seagate Barracuda 7200rpm HDD's (200gb/250gb); and an ASUS K8V SE Deluxe. I have no idea as to what's going on. If it helps, I can get it to show a BSOD and write that down to post here. Can anyone please help me? Thanks in advance, JimmY! :D Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10056
  - 25
    - How do I unlock my RTM Trial version of Win64? I got the RTM Win XPpro 64 edition that is good for 3 or 6 months.. How do I get it unlocked to the Full version or basically where I don't have to worry about the Trial version running out ? HELP ! if you msn messenger, add me and lets talk ! jeremiah739@hotmail.com If you like to email, email me: godzgrace1973@comcast.net Thanks for the Help Tag: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 Tag: 10042

I have just installed Windows 2003 x64 and TCP/IP seems to work. I can get to
various sites and download software. When I try to go to msdn.microsoft.com
the URL gets redirected to 64.252.62.40 which eventually gets to
www.optronics.com. I cannot seem to get to msdn.microsoft.com. Any ideas what
is wrong? I have not had this problem with XP 64 bit, or XP 32 bit.

Kevin

Top

Re: msdn.microsoft.com goes to www.optronics.com through 64.252.62.40 by Andre

Andre
Sat Jul 23 11:23:10 CDT 2005

Clean out your temporary internet files and try again. I don't know what
could specifically be causing it unless its browser hi-jack of Internet
Explorer 32-bit. I would recommend you download a AntiSpyware utility such
as Microsoft AntiSpyware (BETA) and run a full system scan.
--
Andre
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm

"Kevin Burton" <KevinBurton@discussions.microsoft.com> wrote in message
news:F034D8DF-22F7-42B5-8414-EBEAE196D826@microsoft.com...
>I have just installed Windows 2003 x64 and TCP/IP seems to work. I can get
>to
> various sites and download software. When I try to go to
> msdn.microsoft.com
> the URL gets redirected to 64.252.62.40 which eventually gets to
> www.optronics.com. I cannot seem to get to msdn.microsoft.com. Any ideas
> what
> is wrong? I have not had this problem with XP 64 bit, or XP 32 bit.
>
> Kevin

Top