MP 10, more thoughts desired

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - XP Transfer wizard lockup I am transferring files from 98 to XP Pofessional. Have tried the across the network and then sent files and settings successfully to a file location on new xp pc. When attempting to load the settings etc. by way of the wizard,...the wizard locks. Have tried multiple ways with mutliple combinations. Always locks up on the new XP PC. How do I work around? Tag: MP 10, more thoughts desired Tag: 15018
  - 2
    - media Player 10 If it is installed in X64 what may keep it from playing anything? I am told to update drivers, etc. I have updated it all. When I have tried to redownload the player it says it is not compatable with x64 Tag: MP 10, more thoughts desired Tag: 15016
  - 3
    - Terrifyingly slow install/failure Abit AN8 ultra, sata hard drive, 2 Gig memory. AMD64x2 socket 939 Removed all cards but graphics, unhooked LAN connection. Started setup, loaded sata drivers, raid drivers. (though only a single hard drive) deleteted complete partition and reformatted via install process... 4 hours later its still installing.... re-did everything...same result.. Is this me? am I missing something? any suggestions? Tag: MP 10, more thoughts desired Tag: 15015
  - 4
    - Installation Failed The installation doesnÂ´t recognize the hard disk. Wha shall I do? Tag: MP 10, more thoughts desired Tag: 15004
  - 5
    - LSIU160 SCSI controller I have an extra LSI Logic U160 SCSI controller, as well as a couple of 15K drives. I can't find any mention of 64bit drivers on LSI's site, but I thought I saw a list somewhere on Microsoft's site. Is there an HCL where I could check this out? Tag: MP 10, more thoughts desired Tag: 14995
  - 6
    - Downgrade if someonewanted to down grade back to there regular xp would there original serial code work or would it thinkg your installing it on another cpu and not work. thanks. -- Tag: MP 10, more thoughts desired Tag: 14993
  - 7
    - Woohoo TAP Arrives... Takes 5 1/2 months to order, 2 days to ship transatlantic.. CD was rattling around in the case, and the DVD case was smashed up, the CD and Licence were OK thou... Genuine Advantage.... Tag: MP 10, more thoughts desired Tag: 14985
  - 8
    - Subsystem problem Everytime I try to open programs like Turbo Pascal or other full-screen applications like games on this computer I get this error message, always the same one : 16 bit Windows Subsystem C:\WINDOWS\SYSTEM32\AUTOEXEC.NT. The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application. I don't think it's a compatibilty problem because I've already tried to change the compatitbility mode and besides, some of the programs I can't open aren't even that old. Since it says 16 bit at the top I've also tried changing the colour settings but that doesn't work either. I would really appreciate some help with this as I've always had this problem with this computer. Tag: MP 10, more thoughts desired Tag: 14982
  - 9
    - Is 64-bit XP compatible with anything? We just bought our dream machine -- an AMD Athlon dual core with everything we could imagine including XP 64. Unfortunately, we found that simply loading software on the computer was impossible. For instance, a standard Linksys USB wireless G device that we bought two months ago and that worked perfectly on the predecssor got to 25% load on install and then froze. I tried everything -- Safe Mode, etc. -- and still could not get it to load. When we finally got through to the company's tech support, they told us that XP 64 was "for the future" and that it was basically incompatible with everything today. We're thinking that we'll return this computer, but I'm wondering if anyone at Microsoft can tell me if XP 64 is a working system that could be useful today to someone who does the usual Office, photos, videos, etc. If so, what would I need to do to load software on XP 64? Tag: MP 10, more thoughts desired Tag: 14973
  - 10
    - pre-mature expiration of xp64 My xp64 trial ended 6 months early (supposed to be for a year). How can I restore it without having to reinstall? What could have caused this? The only out of the ordinary thing I noticed was that yesterday my calendar was displaying June 1 2005 instead of Sep. 1 2005. Prior to that, however, the date was always correct. I installed the trial late feb. 2005. I corrected the date yesterday and then when I went to boot up for the first time today, it gave me the message to buy a retail version my trial expired. TIA Tag: MP 10, more thoughts desired Tag: 14972
  - 11
    - Transfer Wizard I know that there was an update that worked on the old files but I not find it. HELP? Tag: MP 10, more thoughts desired Tag: 14971
  - 12
    - broadcom wi-fi not working I just bought an emachines m6811 with amd 64 3400+, 512 MB memory, and just finished installing Windows XP Prof. x64. The wi-fi card in the laptop is not finding the access point. It has a broadcom g adapter that works in b or g mode. The adapter is set to work in mixed mode right now. (I have tried it in just g mode but that didn't work either.) I have searched the web for broadcom drivers since the one that is installed right now is a generic one from Microsoft dated 2002. (I have updated Windows with Microsoft Update.) Has anyone else run into this problem? I can get internet access from the ethernet port, but not from the Broadcom wi-fi adapter. P.S. I have gone into Device Manager, and the Broadcom wireless adapter is showing up there, and it does not have any problems or conflicts. It states that it's working properly, but it cannot find the access point. I have also tried connecting to an access point that works just using b mode. That didn't work either. -- Torrey Lauer Modern Travel Services moderntravel DOT net Rainbow Sky Travel rainbow sky travel DOT net Tag: MP 10, more thoughts desired Tag: 14967
  - 13
    - DirectX and Windows Media Player? What kind of support is offered for DirectX and WMP 10? It said I couldn't install them after I downloaded them, and I'm fairly new to this 64 bit system thing. I ust got the new rig today. Tag: MP 10, more thoughts desired Tag: 14960
  - 14
    - Powertoys Has Microsoft released any powertoys for XP 64Bit? Thanks Richard 552320 Tag: MP 10, more thoughts desired Tag: 14952
  - 15
    - Win XP 64 (TAP upgrade) will not run I have a dual booted PC with Win XP SP2 and Win XP 64 (RC2). The Win XP 64 ran OK. Having, at last, received my TAP upgrade I upgraded (re-installed) Win XP 64. The installation appeared to go OK. I preloaded Silicon Image 3114 SATA Raid5 version 1.2.3.1 driver and the nVidia SATA Raid version 6.66 drivers. The partition for Win XP 64 is the 3rd (Volume E:) on the nVidia SATA and is set up as a Raid 0+1 At the stage of finalising the installation on rebooting the PC looped. On preventing a reboot the error: *** STOP: 0x0000007B (0xFFFFFADFE480F3C0, 0xFFFFFFFFC00000034, 0x0000000000000000, 0x0000000000000000) was reported. The motherboard is a gigabyte GA-K8NXP-SLI with a dual nVidia 6600 GT video card (GV-3D1). Through WinXP (which still runs OK) I have access to the Win XP 64 installation. Can you please help Thanks Brian Tag: MP 10, more thoughts desired Tag: 14946
  - 16
    - Reportin Services 2005 Cache Hits This is a multi-part message in MIME format. ------=_NextPart_000_003E_01C5AFF1.30857940 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Salut, Am instalat Reporting Services 2005 beta 2 pe un server cu Windows 2003 = SE cu 4 GB RAM, RAID 5, updateurile la zi. Dupa ce am uploadat rapoartele, configurat conexiune, drepturile pe = rapoarte etc, dupa un timp, in timp ce se accesau aceste rapoarte si = functionau corect, am primit un mesaj de eroare cum ca sa pornesc = serviciul ReportServer. M-am dus la servicii si am constata ca serviciul se oprise iar in Event = View am primit erorile de mai jos: The report server cannot create the Total Cache Hits (Semantic Models) = performance counter. The report server cannot create the Cache Hits/Sec (Semantic Models) = performance counter. Service cannot be started. = Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogExceptio= n: An internal error occurred on the report server. See the error log = for more details. at = Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Bool= ean firstTime) at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] = args) at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object = state) For more information, see Help and Support Center at = http://go.microsoft.com/fwlink/events.asp. EventType sql90exception, P1 reportingservicesservice.exe, P2 = 9.0.1187.0, P3 4293d3fe, P4 sqldumper_unknown_module.dll, P5 0.0.0.0, P6 = 00000000, P7 0, P8 02e8ba65, P9 00000000, P10 NIL. For more information, see Help and Support Center at = http://go.microsoft.com/fwlink/events.asp. Am tot cautat pe net si nu prea am gasit informatii, decat pe un form la = Microsoft cum ca aceste erori sunt bug-uri. Are cineva vreo idee de unde ar putea fi? --=20 Adrian Neagu Network Administrator --=20 Adrian Neagu Network Administrator ------=_NextPart_000_003E_01C5AFF1.30857940 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2900.2722" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY> <DIV><FONT face=3DArial size=3D2></FONT> <DIV><FONT face=3DArial size=3D2>Salut,</FONT></DIV> <DIV><FONT face=3DArial size=3D2>Am instalat Reporting Services 2005 = beta=20 2 pe un server cu Windows 2003 SE cu 4 GB RAM, RAID 5,=20 updateurile la zi.</FONT></DIV> <DIV><FONT face=3DArial size=3D2>Dupa ce am uploadat rapoartele, = configurat=20 conexiune, drepturile pe rapoarte etc, dupa un timp, in timp ce se = accesau=20 aceste rapoarte si functionau corect, am primit un mesaj de eroare = cum ca=20 sa pornesc serviciul ReportServer.</FONT></DIV> <DIV><FONT face=3DArial size=3D2>M-am dus la servicii si am constata ca = serviciul se=20 oprise iar in Event View am primit erorile de mai jos:</FONT></DIV> <DIV><BR><FONT face=3DArial size=3D2><EM>The report server cannot create = the Total=20 Cache Hits (Semantic Models) performance counter.<BR>The report server = cannot=20 create the Cache Hits/Sec (Semantic Models) performance = counter.<BR><BR>Service=20 cannot be started.=20 Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogExceptio= n: An=20 internal error occurred on the report server. See the error log for more = details.<BR>at=20 Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Bool= ean=20 firstTime)<BR>at=20 Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] = args)<BR>at=20 System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object = state)<BR>For=20 more information, see Help and Support Center at <A=20 href=3D"">http://go.microsoft.com/fwlink/events.asp</A>.<BR><BR>EventType= =20 sql90exception, P1 reportingservicesservice.exe, P2 9.0.1187.0, P3 = 4293d3fe, P4=20 sqldumper_unknown_module.dll, P5 0.0.0.0, P6 00000000, P7 0, P8 = 02e8ba65, P9=20 00000000, P10 NIL.<BR>For more information, see Help and Support Center = at=20 </EM></FONT><A href=3D""><FONT face=3DArial=20 size=3D2><EM>http://go.microsoft.com/fwlink/events.asp</EM></FONT></A><FO= NT=20 face=3DArial size=3D2><EM>.</EM></FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial size=3D2>Am tot cautat pe net si nu prea am = gasit=20 informatii, decat pe un form la Microsoft cum ca aceste erori sunt=20 bug-uri.</FONT></DIV> <DIV><FONT face=3DArial size=3D2>Are cineva vreo idee de unde ar putea = fi?<BR><BR>--=20 <BR><BR>Adrian Neagu<BR>Network Administrator</FONT></DIV></DIV> <DIV><BR><FONT face=3DArial size=3D2>-- <BR><BR>Adrian Neagu<BR>Network=20 Administrator</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT> </DIV> <DIV><FONT face=3DArial><BR><FONT = size=3D2></FONT></FONT> </DIV></BODY></HTML> ------=_NextPart_000_003E_01C5AFF1.30857940-- Tag: MP 10, more thoughts desired Tag: 14940
  - 17
    - msn search tool & plishing tool Do these work in winxp 64??? -- Hugh Tag: MP 10, more thoughts desired Tag: 14921
  - 18
    - activex in 64 bit any word on when it will be supported in 64 bit? -- Hugh Tag: MP 10, more thoughts desired Tag: 14918
  - 19
    - spell checker in outlook express It halts with no error message. It does not work in Outlook Express??? -- Hugh Tag: MP 10, more thoughts desired Tag: 14915
  - 20
    - Registry first aid ran this program in xp 64 bit. Big mistake, it wipe out my desktop when I rebooted. I came to a desktop with no start tool bar.when i finally got desktop up only had classic mode available. I had to reinstall to fix this situation. Anyone else experience this in winxxp 64?Always worked fine in xp 32 bit. -- Hugh Tag: MP 10, more thoughts desired Tag: 14913
  - 21
    - system restore in 64 bit what do I type in the (command window) to bring up system restore. under accessories,system tools no system restore.????? -- Hugh Tag: MP 10, more thoughts desired Tag: 14911
  - 22
    - Team Foundation Server on Windows Server x64 Edition Hello. I'm trying to install Team Foundation Server Beta 2 on Windows Server 2003 x64 Edition Enterprise (with all current updates - we are using SUS). Attept #1 1. Installing .Net Framework 1.1 (Before installing it says that I should turn on "Enable32bitAppOnWin64", using script: cscript adsutil.vbs set w3svc/AppPools/Enable32bitAppOnWin64 1 - I did it. 2. Installing .Net Framework 1.1 SP (NDP1.1sp1-KB867460-X86.exe ) 3. Installing SQL Server 2005 (32 bit) Developer CTP April 2005 (first it installing .net framework 2.0 beta 2 x64!) 4. After all i can't access to IIS - neigher to http://localhost/Reports no http://localhost - it says - Service Unavailable Attept #2: (reinstall windows server with format hdd) 1. Installing SQL Server 2005 x64 Developer CTP June 2005 it installs .net 2.0 x64 2. http://localhost and http://localhost/Reports working fine 3. But to install Windows SharePoint Services (WSS) which is the reqirement of the installation TFS i need to install .net framework 1.1, because WSS don't want to work with 2.0. 4. After installation .net framework 1.1 and the situation is the same as after attept #1 Questions: 1. Is it possible to install TFS on Windows Server 2003 x64 with SQL 2005 (any version) installed? 2. Is it possible to install WSS on WS 2003 x64 with .netframework 2.0 with (without) .netframework 1.1? 3. Is it possible to have .net web applications in 1.1 (32bit) and 2.0 (64bit) together on the one machine? Great thank for everyone who will be able to help, Alex Tag: MP 10, more thoughts desired Tag: 14908
  - 23
    - Dictionary Loking for a dictionary that works in 64 bit. anyone???? -- Hugh Tag: MP 10, more thoughts desired Tag: 14885
  - 24
    - Hp Photosmart 7550 drivers I d/led the pre beta drivers from Planet AMD 64 . Installed them & everything works except for the 2-sided (duplex) printing. There does not seem to be an automatic selection. The selections listed are manual,right & left booklet. anyone no how to set the automatic to sided printing.I have the module for sided printing installed on the photosmart & it works in win xp pro 32 fine. anyone? besides this little inconvience these drivers install & work great. http://www.planetamd64.net/ -- Hugh Tag: MP 10, more thoughts desired Tag: 14883
  - 25
    - Scanner (again) The only true reason for keeping dual boot (x32 and x64) is that I have no x64 driver for my USB Agfa Snapscan Touch scanner. Is it possible to run some Virtual Machine Program (VirtualPC, VMWare), install WindowsXP 32bit on it, install my scanner and use it without leaving WinXP x64? Help Andre, Help Charlie Russel, Help everyody! Carlos Tag: MP 10, more thoughts desired Tag: 14878
- Next
  - 1
    - antivirus for email Does anyone know of an antivirus product that works/loads on x64? I found a Symantec enterprise product but I would have to buy 100 licenses -- Timothy Tag: MP 10, more thoughts desired Tag: 14862
  - 2
    - WinZip still does'nt support x64 context options Just noticed the release of WinZip 10, and it still does'nt have working context menus... http://www.winzip.com/betawz.cgi Greetings Juan Jansen Tag: MP 10, more thoughts desired Tag: 14857
  - 3
    - update error 0x80070057 Hi When I try donwload critical updates I get this error 0x80070057 the other components: drivers and Windows 64 elements gone well. The log is the folowing: 2005-09-01 18:31:45 16:31:45 Success IUENGINE Determining machine configuration 2005-09-01 18:31:45 16:31:45 Success IUENGINE Determining machine configuration 2005-09-01 18:31:49 16:31:49 Success IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/getmanifest.asp 2005-09-01 18:31:49 16:31:49 Success IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/getmanifest.asp 2005-09-01 18:31:50 16:31:50 Success IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/getmanifest.asp 2005-09-01 18:31:51 16:31:51 Success IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/getmanifest.asp 2005-09-01 18:31:52 16:31:52 Success IUENGINE Determining machine configuration 2005-09-01 18:31:53 16:31:53 Success IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/consumerdrivers/getmanifest.asp 2005-09-01 18:32:02 16:32:02 Error IUENGINE loadXML: line 1, pos 3566, A semi colon character was expected. (Error 0xC00CE50D) 2005-09-01 18:32:02 16:32:02 Success IUENGINE <catalog xmlns="x-schema:http://schemas.windowsupdate.com/iu/catalogschema.xml" clientType="CONSUMER"><provider><identity itemID="InstallationProvider" name="InstallationProvider"><publisherName>InstallationProvider</publisherName></identity><item installable="1"><identity itemI 2005-09-01 18:32:02 16:32:02 Error IUENGINE Querying software update catalog from https://v4.windowsupdate.microsoft.com/getmanifest.asp (Error 0x80070057: The parameter is incorrect.) Thanks in advance Javier Tag: MP 10, more thoughts desired Tag: 14846
  - 4
    - NTFS compress VS folder compress in x64 Clear Dayhi all, got a little confuse here that from microsoft declaration. compress folder hav no performance degration while ntfs compress has. I'm wondering which is a better way for me to save disk space yet using it as ordinary folders and drives. From all your experts out there which do you think functions better? and also i found that microsoft mentioned that folder compress is not available in x64.. so does that means the folder compress in the x64 i'm using is not valid? Thanks in advance. min --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0535-2, 08/31/2005 Tested on: 9/2/2005 1:28:02 AM avast! - copyright (c) 1988-2005 ALWIL Software. http://www.avast.com Tag: MP 10, more thoughts desired Tag: 14844
  - 5
    - VB6 Compiler for Win 2003 Datacenter - 64-bit Itanium Wondering where we can locate a VB6 Compiler for Win 2003 Datacenter - 64-bit Itanium... Thanks... Tag: MP 10, more thoughts desired Tag: 14841
  - 6
    - ODBC I am using a trial version of Win 64 bits with great pleasure and satisfaction. The only stumbling block is that I cannot create an ODBC for Access and SQL. 1. It's there but does not open like Win XP 32 bits. It only offers SQL Server. 2. As for SQL Server 2000 SP4 does not recongnize Aliases created in the Client Manager. Thus, I am unable to create a server in SQL 2000. Is there a way around or will a SP5 correct this? Thank you for your help. Tag: MP 10, more thoughts desired Tag: 14830
  - 7
    - Problem with chm files I installed Win XP x64. Everything is allright - system is stable during more than 2 months, but i noticed that i can't open .chm files. Particular - it opens but show me only left frame with Contents correctly, on the right frame it always shows Action canceled Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable. -------------------------------------------------------------------------- Please try the following: a.. Click the Refresh button, or try again later. b.. If you have visited this page previously and you want to view what has been stored on your computer, click File, and then click Work Offline. c.. For information about offline browsing with Internet Explorer, click the Help menu, and then click Contents and Index. Internet Explorer Yesterday I installed on another PC Windows Server 2003 x64 Enterprise - and it also has the same problem with chm files. Could you help me? Alex P.S. Is there anybody who know how to install driver for printer Canon LBP-800 on WinXP x64? Tag: MP 10, more thoughts desired Tag: 14829
  - 8
    - setup.exe does nothing until restart Hi all, I am trying to install an app by running setup.exe but nothing appears when I do so. I can see the process exists in task manager but nothing appears. When I go to restart my XP x64 box, the setup dialogue appears briefly before the system restarts. So, I am guessing that setup.exe is blocked on something being released before it can run (which is released just before the restart). I have tried disabling my anti-virus (avast) and rebooting to no effect. Have also tried ending every process I think I can get away with before trying setup.exe with no success. Can anyone shed any light on what it is waiting on or what I can do? Many thanks for your time, Dave Tag: MP 10, more thoughts desired Tag: 14822
  - 9
    - bIOMETRIC keybarod i got this mircosft biometrics keybaord, its very cool for home use but i've gone back to using win 64x but the damn thing does'nt support it. does any one where i can software for this cos i cant to seem to find any??? Tag: MP 10, more thoughts desired Tag: 14807
  - 10
    - Will external DVD drives boot? Hi, all! To my horror and amazement, I just found out that my fairly new HP zv5000 Notebook is equiped with a CD/DVD burning combo (the flimsy one) that wount boot a DVD. Rather than sending it back and having it upgraded - which will be both expensive and time consuming - I thought I'd invest in a external drive. Never before an option with sufficient allure potential for me, I seem to have missed some essential wisdom - will such a critter boot? And will it boot Win64? Tony. . . Tag: MP 10, more thoughts desired Tag: 14799
  - 11
    - Basic or Dynamic Hi has anyone seen the option in 'Disk Management' to change your hard drive type from 'Basic' to 'Dynamic'? If so, I have some questions: A - Is it worth changing the hard drive type from 'Basic' to 'Dynamic'? B - What are the advantages of doing this? C - Are their any disadvantages in doing this? Many Thanks Tag: MP 10, more thoughts desired Tag: 14796
  - 12
    - EPSON laser printer drivers Seems like EPSON has finally released x64 drivers for many of their laser printers. http://esupport.epson-europe.com/SupportHome.aspx Tag: MP 10, more thoughts desired Tag: 14795
  - 13
    - Nevermind .. Scratch the previous comment .. found what I was looking for. Tag: MP 10, more thoughts desired Tag: 14789
  - 14
    - Undelete or file recovery tool Does anyone know if there's an undelete or file recovery tool for x64? Somehow I killed a folder and I'd really like to get it back. Tag: MP 10, more thoughts desired Tag: 14788
  - 15
    - nforce4 raid boot driver http://www.giga-byte.com/Motherboard/Support/Driver/Driver_GA-K8N%20Ultra-9.htm Well, I don't see the raid boot driver here. I tried using the 32 boot driver and win64 complained. Suggestions? [OK, useful suggestions. ;-)] Tag: MP 10, more thoughts desired Tag: 14785
  - 16
    - how to remove the bootup user login after installing the net framework 2.0 i get the loging screen at bootup waiting for me to login as user or admin ho do i get windows 64 to boot without this screen, i want to go direcly to the decktop.... Thanks gary Tag: MP 10, more thoughts desired Tag: 14777
  - 17
    - x64 install I downloaded the iso image and using rosio wrote it to disk. Winimage sees it but it will not boot. I created another cd using winimage to copy the iso to a normal cd. It won't boot either. I downloaded a virtual cd driver and am able to view the iso image but when I click on the setup it pops up a message that I must boot from the cd. Anybody else having a problem with these files? Tag: MP 10, more thoughts desired Tag: 13776
  - 18
    - After installation i get a blank screen Group, I just installed, i believe Windows XP 64 on the configuaration below. The Windows XP logo starts and everything appears to be working, but then i receive a blank screen and my monitor says "NOT OPTIMUM MODE 1280X1024. Any ideas on what to do next? Thanks AMD, Qty 2 x Opteronâ?¢ 248 2.2 GHz, HT 800MHz, 1MB L2 cache, socket 940, Retail TYAN, Thunder K8S Pro Dual Opteron Socket 940, DDR400, SATA RAID, Video, Dual Gb LAN, Retail DDR-400, Qty 4 x 1024Mb PC3200 DDR-400, ECC, Registered (4GB Total) MAXTOR, 250.0 GB, 7200-RPM, Serial ATA, 8MB Cache MAXTOR, 250.0 GB, 7200-RPM, Serial ATA, 8MB Cache TYAN, Silicon Image Sil3114 SATA RAID Controller (Integrated) VIDEO, Integrated ATI RAGE XL SVGA PCI video controller CREATIVE LABS, Sound Blaster Live 24-Bit, Single MITSUMI, 1.44Mb 3.5 Black Floppy Drive NONE, No Tape Drive (choose one) SONY, Black 52x32x52-16A DVD-ROM/CD-RW Combo Drive BROADCOM, BCM5704C, 10/100/1000 Network Card (Integrated + SAMSUNG, 912N, Black 19" TFT LCD .29mm 1280 x 1024 @ 75Hz Flat Panel Monitor (Special!) Tag: MP 10, more thoughts desired Tag: 13772
  - 19
    - Photostory 3 I tried to download Photostory 3 and it won't install on XP x64. Has anyone been able to run it on x64? Tag: MP 10, more thoughts desired Tag: 13770
  - 20
    - NVIDIA Forceware 77.79 for Windows x64 It is a quiet day so I thought I would share some drivers with you all well not all of your. You 32bit folks are out of luck - but then you d have a 78.xx release to play with after all, although those are olde than the last official release. These drivers were built on the 2nd August, which makes them the newes set currently available. I have been using the drivers for a couple o days before 77.77 was released (upgrading from 77.72) and haven' really noticed too many differences, but then I didn't really have an issues with the older set. The drivers are not WHQL signed so onl those that are not afraid of pop-up boxes should use them. http://www.techarena.in/comments.php?catid=3&id=328 -- dr.ni ----------------------------------------------------------------------- dr.nil's Profile: http://forums.techarena.in/member.php?userid=440 View this thread: http://forums.techarena.in/showthread.php?t=34580 Visit - http://www.techarena.in | http://forums.techarena.in | http://gallery.techarena.i Tag: MP 10, more thoughts desired Tag: 13760
  - 21
    - GPT documentation still incorrect Hi, I've mentioned this also a few times, and i hope that it will be adressed this time... The following links on http://www.microsoft.com/whdc/system/platform/64bit/default.mspx still have incomplete infomation about GPT. These 2 docs, only refer to IA GPT, while x86 and x64 now also supports it. http://www.microsoft.com/whdc/device/storage/GPT-64bit.mspx http://www.microsoft.com/whdc/device/storage/GPT_FAQ.mspx Those 2 docs should be UPDATED accordingly... Greetings Juan Jansen Tag: MP 10, more thoughts desired Tag: 13756
  - 22
    - Powertoys x64 Hi, Will it ever happen? Official x64 Powertoys? Never heard from it again... asked a few times, a few months ago... Please somebody from MS tell us when/if to expect x64 Powertoys (officials ones, from ms site) Greetings Juan Jansen Tag: MP 10, more thoughts desired Tag: 13755
  - 23
    - error message I have windows XP Pro. When I turn on my windows, at the very begining I get this error message "pokapoka62.exe has encountered a problem and needs to close. We are sorry for the inconvenience." I do not know what it is...I would appereciate your help... When I search this file ... I could not find it it even.. Is it a virus/trogan activity or...? Waseem Tag: MP 10, more thoughts desired Tag: 13741
  - 24
    - Damn... It's Friday, I have a bit of time to kill. I miss "Ted"'s rants. Please Ted, come back. Your posts were so entertaining! Tag: MP 10, more thoughts desired Tag: 13730
  - 25
    - AVG anti-virus 64 part of an e-mail I received today from AVG-anti virus Re windows 64 Unfortunately, AVG Anti-Virus is not compatible with Windows 64-bit version operating systems. A new AVG Anti-Virus version that will protect 64-bit computers is under development at the moment. Kindly check our website, News Section, where information about new AVG releases will be posted. Tag: MP 10, more thoughts desired Tag: 13726

Calling all BRAINS please. The more we talk the more we learn and I am sure I
missed the key in the last 56 pages so I keep reading them over.
thanks.....Besides I think it is time I took a break form this head banging
effort and, ..........I am just going out to a dance tonight and see what
develops on here when I get back.

Top

RE: MP 10, more thoughts desired by joromo

joromo
Sat Sep 03 21:33:01 CDT 2005

I guess everyone left before I did. I will close the door behind me
then........................GOODNIGHT

"joromo" wrote:

> Calling all BRAINS please. The more we talk the more we learn and I am sure I
> missed the key in the last 56 pages so I keep reading them over.
> thanks.....Besides I think it is time I took a break form this head banging
> effort and, ..........I am just going out to a dance tonight and see what
> develops on here when I get back.

Top