express studio on x64, then install platform sdk fails

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Windows Media cant find source fm music server. I have a WinXP workstation and a WinXP_x64 workstation on a SBS2003/WinServer2003 network. I have the WinXP workstation playing the music from King FM using the Windows Media Player. I want to shut down the media player on the WinXP workstation and open it on the WinXP_x64 workstation. I browse to the King_FM server, click the listen on line button, and then the Listen using the standard Windows Media Player. All this is just as I do on the standard WinXP workstation. However, on the x64 workstation, Windows Media Player throws the following error: "Windows Media Player cannot play the file because a network error occurred. The server might not be available. Verify you are connected to the network and that your proxy settings are correct. Well, it got out to the http server so I think those settings are working. I did check the Network settings on the Tools-> Options panel, and it appears that WinMediaPlayer uses ports 7000 to 7007. I tried to open ports to the WinMediaPlayer in the firewall, but, as it is a windows component, it does not appear in the list of programs. I am loath to open 8 ports individually in the Windows Firewall. Is there some way to associate those ports with Windows itself? Is there something else I chould be setting to get WinMediaPlayer to work on the x64 workstation? -- Hollis Paul Mukilteo, WA USA Tag: express studio on x64, then install platform sdk fails Tag: 42023
  - 2
    - X64 SP2 ??? Hello Everyone What is the status of service Pack 2 for X64, when will it be released? Thank you --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0659-0, 15/12/2006 Tested on: 16/12/2006 8:14:10 AM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com Tag: express studio on x64, then install platform sdk fails Tag: 42018
  - 3
    - HArd disk pioneer Alan Shugart passes... http://www.betanews.com/article/Alan_Shugart_1930_2006/1166127152 Tag: express studio on x64, then install platform sdk fails Tag: 42008
  - 4
    - Dual core processor not used under XP pro x64 Hello, I've just got my new Dell precison 690 with two dual core Xenon Intel processor. I've install XP pro x64. No problem, windows sees my processors..... but only uses one of them! By default the bios had enabled Hyper threading and I could only use a maximum of 12,5 % of my processor. Now that I have disabled HT, I can use 25%, but I can't find a way to use the whole power available. I checked affinity and my main application is allowed to uses all the processors....but it does not. Any ideas ? -- Eric Appelmans Tag: express studio on x64, then install platform sdk fails Tag: 41997
  - 5
    - Printing to Xerox 5500 There is a known issue with the Xerox Phaser 5500 printer installation as this runs a program called PSCOUTEXE. Everytime I print to the 5500 printer it threw up a program error "PScoutExe has stopped working". This is a print monitoring program but does not prevent stuff being printed. As this was annoying we did the following..... The program runs as a process so you cannot see it in the TASK Manager window unless you have the error message displayed. Once you have it all you need to do is to remove the run privelages from EVERYONE (first remove inherited properties) and the program does not run when you print, enabling you to print and not getting the error message. Just in case we also downloaded the VISTA driver from XEROX but that did not fix the problem! The issue exisits for both 64 and 32 bit versions of RTM Vista Tag: express studio on x64, then install platform sdk fails Tag: 41995
  - 6
    - system will not boot unless XP cd rom in drive I have a intel storage matrix SATA RAID controller have 2 drives in a RAID 0 array. I have not activated the install because want to make sure everything is working properly. The only way the system will boot to the operation system is if the xp cd is in the drive and when it boots everything seems fine The bios acts as thought the hard drives has nothing on it if the cd rom is not in it This a hardware issue more than a XP install issue? Is this because i have activated it yet or some other reason not sure what started doing this right after i instlled XP Pro x64 edition all new component most recent thecnology (this the reason?) This is a wierd one I used the QUICK NTFS format option on the install Tag: express studio on x64, then install platform sdk fails Tag: 41992
  - 7
    - 5.1, MMDriver.inf and Machine check error I have been having a load of (non) fun over the last couple of days, just when I thought I had this second re-build working it turns out it's not. I've just bought the Emu 1820m Sound-Card and wanted to test getting a 5.1 output from Windows Media Player (WMP). While following the instructions found in the http://www.productionforums.com forums = Tools/Options/Devices/Speakers/Properties and make sure that DirectSound is selected (though I'm not sure at this point as that I have two DirectSound choices - as well as the default there is an E-DSP Wave [BCE0] version. (I've tried both) , anyways, when I clicked on advanced it came up that the MMDriver.inf file was missing, yet I could see it clear as day sitting in my system32 directory - where it was supposed to be. So I searched this fault and found many people had posted copies in the groups, which I copied into my system32 folder after changing the name of the original .inf to .old. I even put a copy into my WOW64 directory. Nothing seemed to be working, so I went into Programs (rightclick) My Computer/manage/eventviewer/system and found a WMIxWDM Errors 120, 122, 123, Machine Check Event reported is a fatal bus or interconnect error. So off I went down this road and read how many people said memory is bad or CPU is bad. My ram is brand new Corsair - the stuff that they recommend. So I started poking around in my bios, tried turning ECC on again, turned chipkill off and searched to find out what the 4 or 8 beat burst was all about. The side panel in my bios said that 64 bit Dq must use 4 beats - and I had it on the 4 because (in my mind) I was running 64 bit. It turns out that 64 bit Dq is single channel memory, so I changed my bios to 8 beats and rebooted and no more WMIxWDM errors. It also turns out that this error is the machine saying it found a problem, but it has fixed it. I notice today that it is still happening at boot, but not on warm boots Back to the MMDriver issue, at Free Codecs.com I found a tute telling how to load the MMDriver.inf, titled "How to (re)install Default Codecs in Windows XP/2000. " 1. Choose Start > Control Panel and click Add hardware, then click Next from Add Hardware Wizard. Click "Yes, I have already connected the hardware" then click Next button, again. 2. Choose Add a new hardware device at the bottom of the list and click Next. Select "Install the hardware that I manually select from a list (Advanced)", and click Next. 3. Select "Sound, video and game controllers" from "Common hardware types" list and click Next. Select "(Standard system devices)" from "Manufacturer" and click Have Disk... button. 4. Click Browse in the Install From Disk dialog box and open the folder C:\Windows\System32 Find mmdriver.inf file, select it and click Open then click OK in the Install From Disk dialog box. If you see a warning about logo compatibility, just click "Continue Anyway". 5. Now you should finally see a list of audio codecs. But I didn't, I got a new error message, "The specified location does not contain a compatible software driver for your device. If the location contains a driver, make sure it is designed to work with windows for x64based systems." I got to thinking that maybe this copy of XP 64bit that I bought from an online retailer who I had dealt with many times had sold me a pirated copy. So I dug deeper on this MMDriver thing, turning up at Microsoft to read this "Microsoft Windows Server 2003 x64 editions and Microsoft Windows XP Professional x64 Edition require that OEM device driver .inf files specify a TargetOsVersion entry in the [Manufacturer] section and in the [Models] section for the following 64-bit computer platforms " "Note The .NTamd64 decoration in the following .inf file excerpt is used for all AMD64 or EM64T platforms. Conversely, the .NTia64 decoration is used for Intel Itanium platforms. [Manufacturer] %mycompany% = MyCompanyModels, NTamd64 [MyCompanyModels.NTamd64] %MyDev% = mydevInstall, mydevHwid " Now if you look at the MMDriver.inf you will see no decorations like above, which makes me suspicious about my copy of x64, or that Microsoft don't do what they say needs to be done. Further down the page I found "Installing Undecorated INFs on X64-based Systems The following workarounds can be used to install undecorated INFs on x64-based systems. These workarounds are intended only for use on test systems and are not recommended for production drivers. Method 1. Turn off the undecorated models check for AMD64. To turn off the undecorated models check for AMD64-based systems only, create the following non-zero numeric registry value: HKLM\Software\Microsoft\Windows\CurrentVersion\Setup: REG_DWORD: DisableDecoratedModelsRequirement Set the key to a non-zero value (such as 1) and restart the system, then install the driver. " Now running the free-codecs install worked, but what do I need to load? [note: I just installed Microsoft ADPCM CODEC, but SiSandra still only shows 1 channel] choices are [MCI] CD Audio [MCI] Microsoft Video for Windows [MCI] Midi Sequencer [MCI] Sound Cinepak Codec by Radius Inc DSP Group TrueSpeech Audio Codec IMA ADPCM Audio codec Microsoft ADPCM Audio Codec Microsoft Audio Compression Manager Microsoft CCIT G.711 Audio Codec Microsoft GSM 6.10 Audio Codec Microsoft RLE Codec Microsoft Video 1 Midi Mapper On this OS install I did not load the AMD Driver Pack, it seems that I have to load the setup_8131.exe first to get the amdpci64 filter loaded, because the driver pack asks for this sys file which is not anywhere else in the machine. I've tried loading the amdapic64 but I get an error that I have no supported hardware. I'd want to think that the OS has the chipset drivers etc My system specs are MSI 9131 Dual 248 Primary drive is 80GB WD On PCI-X slot 1 is RocketRaid 2224 with 2xSamsung 250GB SATA-II drives set in Raid_0 In PCI slot_1 Emu sync card, PCI slot_2 Emu 1010 card, PCI-X slot 2 VisionTek (ATI) X1300 VGA, PCI-X slot 3 VisdionTek Theatre 550 Com and printer ports turned off in BIOS Enermax Liberty 500w power supply Antec Titan case Rounded cables SiSoftware Sandra System Host Name : XXXXXXXXXXX User : XXXXXXXXXXXX Workgroup : XXXXXXXXXXXXXXX Processor Model : 2x AMD Opteron(tm) Processor 248 Speed : 2.19GHz Model Number : 3490 (estimated) Performance Rating : PR7894 (estimated) Cores per Processor : 1 Unit(s) Threads per Core : 1 Unit(s) Internal Data Cache : 64kB Synchronous, Write-Back, 2-way set, 64 byte line size L2 On-board Cache : 1MB ECC Synchronous, Write-Back, 16-way set, 64 byte line size Mainboard Bus(es) : ISA PCI PCIe IMB USB FireWire/1394 i2c/SMBus MP Support : 2 Processor(s) MP APIC : Yes NUMA Support : 2 Node(s) System BIOS : American Megatrends Inc. 080008 System : MSI MS-9131 Mainboard : MSI MS-9131 Total Memory : 3GB DDR-SDRAM Registered Chipset 1 Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration Front Side Bus Speed : 2x 796MHz (1592MHz data rate) Total Memory : 2GB DDR-SDRAM Registered Memory Bus Speed : 2x 199MHz (398MHz data rate) Chipset 2 Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration Front Side Bus Speed : 2x 796MHz (1592MHz data rate) Total Memory : 1GB DDR-SDRAM Registered Memory Bus Speed : 2x 199MHz (398MHz data rate) Video System Monitor/Panel : Plug and Play Monitor Adapter : Standard VGA Graphics Adapter Adapter : Radeon X1300 Series Adapter : Radeon X1300 Series Secondary Physical Storage Devices Removable Drive : Floppy disk drive Hard Disk : WDC WD800JB-00JJC0 (75GB) Hard Disk : HPT DISK 0_0 SCSI Disk Device (466GB) CD-ROM/DVD : LITE-ON LTR-52327S (CD 52X Rd, 52X Wr) Logical Storage Devices Hard Disk (C : 29GB (23GB, 78% Free Space) (NTFS) Store (D : 45GB (44GB, 97% Free Space) (NTFS) Raid Capture (E : 466GB (459GB, 99% Free Space) (NTFS) ARMPXOEM_EN (F : 559MB (CDFS) *** my x64 disk 3.5" 1.44MB (A : 1.4MB (1.1MB, 83% Free Space) (FAT) Peripherals USB Controller/Hub : AMD PCI to USB Open Host Controller USB Controller/Hub : AMD PCI to USB Open Host Controller USB Controller/Hub : USB Root Hub USB Controller/Hub : USB Root Hub FireWire/1394 Controller/Hub : OHCI Compliant IEEE 1394 Host Controller Keyboard : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard Mouse : Microsoft PS/2 Mouse MultiMedia Device(s) Device : ATI Unified AVStream Driver Device : E-MU E-DSP Power Management AC Line Status : On-Line Operating System(s) Windows System : Microsoft Windows XP/2003 Professional x64 Edition 5.02.3790 (Service Pack 1) Network Services Adapter : Broadcom NetXtreme Gigabit Ethernet Adapter : Broadcom NetXtreme Gigabit Ethernet #2 (not connected) Any help would be apprechiated, TIA Roger Tag: express studio on x64, then install platform sdk fails Tag: 41988
  - 8
    - msvcp/r71.dll missing ***Hi all, just trying Vista64 rc1 (build 5600) on a Ferrari 1005, several apps say "msvcP (or R) 71.dll missing" ms solutions said "install .net 1.1" which i did, but now dont know where its gone ! ***AVGrisoft say need build 6000, but that not on winUP site ? Tag: express studio on x64, then install platform sdk fails Tag: 41978
  - 9
    - Install 32 bit Version of XP Pro after x64 I upgrade my computers (2) ever 3 years or so. Last year I upgraded to dual core ... and had xp pro x64 installed. This works good for me. However my wife is having dificulty with some websites. I am going to try uninstalling the NVida firewall and see if that works for her. I did buy two full copies of the 32 bit XP Pro to install on both computers. My thoughts are that I install a new HD and disconect the x 64 drive. Install the 32 bit o/s on the new drive. Set the new drive as a slave, and reinstall the x64 drive. Now from there how do I get the dual boot to work? btw I am a not an IT professional, just a hobbiest. Tag: express studio on x64, then install platform sdk fails Tag: 41966
  - 10
    - Security Update for Microsoft Visual Studio 2005 (KB925674) Subject does not want to install (XP x64) Installation Failure Error Code: 0x64C Anybody got the same ? Tag: express studio on x64, then install platform sdk fails Tag: 41962
  - 11
    - complete image backup The image file created to be stored on an external HD is the size of the HD's imaged or is the image file smaller? My partitions are 239 111 40 gig. Do I need an external hd of 400gig or better to store the image file? Tag: express studio on x64, then install platform sdk fails Tag: 41942
  - 12
    - freezes during startup I have just begun having a problem when starting up windows x64. During the logo screen the blue bar stops and stays like that. I can not get into or past my computer. The only hardware change was a dvd burner that i installed, recently i unplugged it thinking something screwed it up. This was not the case. Occasionally i will get a system boot failure. I have managed to get into safe mode with networking but am unsure as to what the problem may be. Any help would be appreciated. FYI, i replaced the power supply, bearing was going bad anyway but i thought this might fix the problem, it did not. Tag: express studio on x64, then install platform sdk fails Tag: 41939
  - 13
    - WMP 11 WMP 11 (x64) finally showed up on the MicroSoft Update site - My question: Are there any problems or restrictions on updating to 11 or is it better for the immediate future to remain with 10? Larry Tag: express studio on x64, then install platform sdk fails Tag: 41933
  - 14
    - ISA Client for Vista and XP x64 Releases to Web http://www.microsoft.com/downloads/details.aspx?familyid=05c2c932-b15a-4990-b525-66380743da89&displaylang=en Supports both 32-bit and 64-bit versions of Server 2k3, XP and Vista. (Along with some legacy 32-bit only, of course. ) Finally, an official, released, version we can all use. -- Charlie. http://msmvps.com/xperts64 Tag: express studio on x64, then install platform sdk fails Tag: 41931
  - 15
    - Questions about Windows 2003 64 Hello, These questions may seem silly but I'll ask to play it safe - thanks for your feedback. ANyone have any issues with adding a 64 bit 2003 server to an existing Windows 2003 domain if the existing servers are 64 bit? Anyone have any issues with running Symantec AV enterprise on Windows 2003 64 server? I've worked with McAffee, Sophos and others - I prefer Symantec - so my question is about Symantec, not alternatives. Anyone see an advantage to running Windows 2003 64 for a DC, if they only plan on using 4GB on that server and a dual core processor? Thanks again! Tag: express studio on x64, then install platform sdk fails Tag: 41930
  - 16
    - Can't get XP x64 installed correctly I'm installing Windows XP x64 on a RAID0 array. I used the current nVidia RAID drivers and successfully formatted the array, and Windows Install went smoothly. However, I can't get past the splash screen. Windows just reboots every single time and it goes into a loop with no BSOD or error message. I have reinstalled once only to get the same result. My configuration is: AMD Athlon XP 3200+ Gigabyte GA-K8NXP-SLI (using the nForce 4 RAID controller) 2gb Kingston PC3200 DDR 2 Western Digital WD2500KS 250gb hard drives OEM Windows XP Pro x64 I will try to use the other SATA RAID controller on the board (Silicon Image Sil3114) unless someone can help me figure out what's going on! Tag: express studio on x64, then install platform sdk fails Tag: 41922
  - 17
    - Microsoft updates "corrupts" install - continuously reboots Installed WS2003 Enterprise x64 evaluation on sata drive with no problems. Appears to work fine untill I run Windows Updates. After installing updates & re-booting, the system will not completely boot - it just passes the splash screen, then reboots before the login screen appears & remains in this loop. Any suggestions as to what might resolve this issue would be greatly appreciated! Tag: express studio on x64, then install platform sdk fails Tag: 41920
  - 18
    - Windows Vista Unsigned Drivers Hello! So I've got this Gameboy Advance Homebrew running device, like a little docking station for a custom GBA cartrdige. Heres the thing, on Windows XP the thing works fine, driver is found stright away and then bam, chucking stuff on it. On Vista (RC1 5600 64bit Beta), the driver can not be found, not on my CD or when I download like a hundred different versions of the driver. Theres a good chance the thing just needs new drivers, but on XP you get the whole "Driver is unsigned or untested, continue anyway?" Which might be the problem. So, basically, asking if anyone has had problems with drivers on Vista and any possible ways to fix it, I'll take anything you got! Thanks so much for reading! Tag: express studio on x64, then install platform sdk fails Tag: 41917
  - 19
    - IA64 : archiving tools For those that care about IA64, there is a new zip/archive build of 7-zip that is native IA64. Winzip will work, but the perfomance dogs due to running in vastly inferior WoW64 of IA. - NuTs Tag: express studio on x64, then install platform sdk fails Tag: 41912
  - 20
    - BSOD Vista 64 I am experiencing what seem to be random Blue-Screen-of-Death errors on my experimental Vista 64 machine. They don't correlate directly to any user actions of mine. It does not happen in Safe Mode or Safe Mode with Networking. I've done what I can by unloading software and driver, but this is becoming over my head. I'm trying to avoid a complete re-install of Vista 64, if possible. In antcipation of requests, the information below is the BSOD text and the few reports I could find. I would appreciate suggestions. Thanks, Dave My configuration is: Compaq Presario SR1630NX with an AMD Athalon 64 3500+ processor Phoenix Technologies BIOS LTD 3.08,9/13/05 1 GB RAM Vista Ultimate RC1 6.0.5600 Build 5600 Built-in graphics: Radeon Xpress 200 EVGA Video GeForce 7300 GT (NVidea G73) 512 MB PCI-E GeForce-provided video driver nv3dum, nvd3dumx.dll nviddmkm.sys driver, version 7.15.10.9685 No dual-boot partitions set up All default installation selections ------------------- This is what my blue screen of death looks like: A problem has been detected and your computer has been shut down to prevent damage to your computer. DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure that any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced setup options, and then select Safe Mode. Technical Information: *** STOP: 0x00000D1 (0x0000000000000010, 0x0000000000000002, 0x0000000000000000, 0 xFFFFF980007E9166) *** ndis.sys - Address 0xFFFFF980007E9166 base at FFFFF9800065C000, DateStamp 44f5584 Collecting data for crash dump... Initializing disk for crash dump ... Beginning dump of physical memory. Dumping physical memory too disk: 100 Physical memory dump complete. Contact your system admin or technical support group for further assistance. After BSOD, at next system restart after User login, the following Windows pop-up appears. Windows has recovered from an unexpected shutdown. Windows can check on line for a solution to the problem. <View Problem details> <Check for solution> <Cancel> The <View problem details> option gives the following: Problem signature: Problem Event Name: BlueScreen OS Version: 6.0.5600.2.0.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: d1 BCP1: 0000000000000010 BCP2: 0000000000000002 BCP3: 0000000000000000 BCP4: FFFFF980007E9166 OS Version: 6_0_5600 Service Pack: 0_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\Mini121006-07.dmp C:\Users\Dave\AppData\Local\Temp\WER-49406-0.sysdata.xml C:\Users\Dave\AppData\Local\Temp\WERE6F0.tmp.version.txt Read our privacy statement: http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409 C:\Windows\Minidump\Mini121006-07.dmp cannot be opened as text. C:\Users\Dave\AppData\Local\Temp\WER-49406-0.sysdata.xml cannot be opened. C:\Users\Dave\AppData\Local\Temp\WERE6F0.tmp.version.txt reads as follows: Windows NT Version 6.0 Build: 5600 Product: workstation Suite: (0x100) Single user TS Professional Flavor: Free Architecture: x64 If I reboot and select the check for solution option, I get a popup notice that a device driver error occurred. When I click on the popup, I get a window that contains: Problem Reports and Solutions Error caused by a device driver Thank you for submitting an error report. Problem description A device driver installed on your computer caused the problem; however, we Cannot determine the precise cause. To troubleshoot this problem, please see Getting help. Related links Additional Technical Information Error Message: STOP 0x000000EA THREAD STUCK IN DEVICE DRIVER (Q293078) <hyper link to: HTTP://Suppoprt.microsoft.com/?kbid=293078> The referenced article discusses video driver errors and is a bit over my head. Tag: express studio on x64, then install platform sdk fails Tag: 41905
  - 21
    - NVidia 97.44's for x64 are out NVidia has just released a new set of drivers for Windows XP x64 http://www.nvidia.com/object/winxp64_97.44.html International versions available too. Carlos Tag: express studio on x64, then install platform sdk fails Tag: 41900
  - 22
    - 64-bit and 32-bit handles Hi, http://msdn2.microsoft.com/en-us/library/aa384203.aspx "Handles to named objects such as mutexes, semaphores, and file handles can all be shared." Does this mean that I can use DuplicateHandle in a 64-bit process and pass the duplicated handle truncated to 32-bits to the appropriate 32-bit process and call DuplicateHandle in a 32-bit process and pass the duplicated handle zero-extended to 64-bits to the appropriate 64-bit process? Thanks for your help. Kornél Tag: express studio on x64, then install platform sdk fails Tag: 41889
  - 23
    - IntelliPoint IntelliType final for Vista 64-bit: http://www.microsoft.com/hardware/vista/vistasupport/intellipoint.mspx http://www.microsoft.com/hardware/vista/vistasupport/intellitype.mspx -- Asus P5WDG2 WS Pro (i975X Express) Core 2 Extreme X6800 RAPTOR 2x150 GB RAID 0 (ICH7R) 4GB DDR2 800MHz GeForce 8800GTX (97.44) Enermax 1000W 75A@+12V LAN 100/100 XP x64 dualboot Vista x64 Tag: express studio on x64, then install platform sdk fails Tag: 41880
  - 24
    - Nvidia 8800 XP x64 drivers Finally they are out, the GeForce 8800 drivers for XP x64. http://www.nvidia.com/object/winxp64_97.44.html -- Asus P5WDG2 WS Pro (i975X Express) Core 2 Extreme X6800 RAPTOR 2x150 GB RAID 0 (ICH7R) 4GB DDR2 800MHz GeForce 8800GTX (97.44) Enermax 1000W 75A@+12V LAN 100/100 XP x64 dualboot Vista x64 Tag: express studio on x64, then install platform sdk fails Tag: 41879
  - 25
    - How to restore dual boot of xp 32 & win 64 I got this from the planet 64 amd newsgroup. I had winxp 64 installed.I then installed Vista RC2 build 5744. I had a copy of Xp home kicking around and thought I would load it ,so when vista comes out I will use it to upgrade to vista. This way I can keep my win xp 64 & dual boot. After installing XPhome I could not dual boot error message was (ntoskrnl.exe is corrupted or missing) I tried everything I could think of to fix the dual boot. I fail miserbly. I came accross this msg. in the newsgroups on Plantnet64 amd. I thought I would give this a try. I followed the instructions carefully. It worked I now can boot vista using (Vista Pro Boot Manager). I can boot to vista Or Xp64 Or xp home 32. If u have had a hard time setting up dual boot after installing xp home try this it worked for me. To restore your dual boot of XP64 and XP32 you will need to run the recovery console from the XP32 install CD. When it asks you which installation you want to log on to make sure you log onto the XP64 installation. From there you should run the command "bootcfg /list" This will find and list all currently installed versions of windows on your system. After you run that you will need to run "bootcfg /rebuild" It will then search for the needed boot information you will get a prompt such as this: Total identified Windows Installs: 2 [1] C:Windows [2] D:Windows Add installation to boot list? (Yes/No/All) You should type "all" and hit enter From there you will be asked to Enter the Load Identifier. This is the name of the operating system. When you receive this message, type the name of your operating system, and then press enter. This is either Microsoft Windows XP Professional or Microsoft Windows XP Home Edition. Then you will be asked to enter OS load options: When you receive this message, type "/fastdetect /NoExecute=OptIn" (for XP32)or "/fastdetect /NoExecute" (for XP64) then press enter. You will be asked the same questions for each OS you have installed. after you have done this you will type "exit". the system will reboot. You may notice that there are 3 choices after using this to repair the dual boot. if this happens goto the boot.ini file in the root of C: and open it with wordpad or notepad. remove the extra line and save the file. Make sure that when you do this that the box for "always use this program to open this kind of file" is unchecked. You should be able to boot into both OSs properly now. Thanks to BTJ for posting on Planet64 AMD Tag: express studio on x64, then install platform sdk fails Tag: 41872
- Next
  - 1
    - same drive different letters I have one drive that keeps showing up as the same drive under different drive letters. One drive is basic the other is dynamic. How do I eliminate the one I don't need? Tag: express studio on x64, then install platform sdk fails Tag: 41871
  - 2
    - uninstalling xp pro 64 bit Accidently installed XP Pro 64 to a clean sata disk. I do not want it -- grabbed the wrong disk. Silly question (not a pro but eager to learn) how do I uninstalll it? I want my 32 bit installed. Do I repartition it or use an emergency disk? How do I do this before booting XP? Any advice with instructions would be greatly appreciated. :-) Tag: express studio on x64, then install platform sdk fails Tag: 41859
  - 3
    - 2k3r2 64bit - cannot run networked applications All: (details) Probably a silly question but I just added an x64 r2 server to our domain. it is not a DC or a GC. I have successfully added the server to the domain. I am logged on a Domain Administrator. (issues) I cannot run any application on a network share. I have 1 TB in a raid array as D:. I've created a network share for D: in A/D as W:\. I cannot run any applications from W:, even though this is locally D:\. Running the same apps from D:\ works perfectly fine with no alteration. None of the A/D users or permissions or shares are 'new', meaning that the same setup has been working for the last 9 months since I built the domain, and still works fine on all the other shares/servers/pc's. I can browse everything. I can take ownership. The Compatibilty tab is greyed out however. (error syntax) Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item. Does anyone have any idea why this is happening? Tag: express studio on x64, then install platform sdk fails Tag: 41856
  - 4
    - RaxCo PerfectDisk now works in Vista For those that might be interested Raxco has released the latest version of PerfectDisk 8.0, build 45, and it runs in Vista, both x86 and x64. I have it installed in RC2 x64 and boy did that disk need defragged! Tag: express studio on x64, then install platform sdk fails Tag: 41851
  - 5
    - Windows XP 64 bit CD rom driver installation When I try to install my CD rom drive under Windows XP 64 bit version the hardware install program keeps telling me there is no driver available. The drive manufacturer's web site says the drive uses the drivers provided by Windows XP and provides no drivers or even a reference to the Windows XP 64 bit version. How do I install my CD rom drives under windows XP 64 bit version? Tag: express studio on x64, then install platform sdk fails Tag: 41840
  - 6
    - x64 install on RAID array Hey, I'm kinda stumped now. Thanks to those who helped me figure out how to get my new RAID array to show up in my existing copy of x64. I'm going to get rid of the old drive, but instead of copy the old machine onto the array, I want a clean Windows install. When I installed x64 before, I had to install a SATA driver during installation. I used a floppy with drivers on it, but have since gotten rid of the floppy drive. I made a CD with the required nVidia RAID drivers, but Windows Install only gives me the option of A:\ to search for the drivers. How can I install Windows on my RAID array by using a second CD with drivers on it? Tag: express studio on x64, then install platform sdk fails Tag: 41830
  - 7
    - Free Iso Mounter / Virtual CD for IA64 ? Can someone recommend a solid utility for 2003 for IA64 ? thx, - NuTs Tag: express studio on x64, then install platform sdk fails Tag: 41825
  - 8
    - Installing RAID drives I'm trying to install 2 Western Digital 250gb hard drives in a RAID 1 setup. I get it setup fine in the BIOS and RAID setup utility (nVidia RAID on a Gigabyte GA-K8NXP-SLI mobo), but Windows doesn't show the drive. What do I need to do to get them setup in Windows??? Tag: express studio on x64, then install platform sdk fails Tag: 41806
  - 9
    - IE 7 randomly closes Anyone else experience IE 7 suddenly needing to close & asking if you want to submitt an error report. I noticed this happens alot on Plantnet64 AMD in the download directory while viewing files. Tag: express studio on x64, then install platform sdk fails Tag: 41801
  - 10
    - PC versions of Ilife 06 I am running Windows Xp Sp2 on a 64 bit laptop. I was wondering if anyone knows of what the PC versions of Mac Ilife 06 are? I know a few differents but trying to find the rest. Example: Mac PC Imovie Movie Maker Garageband ? Iphoto ? IDVD ? any help would be great. Tag: express studio on x64, then install platform sdk fails Tag: 41793
  - 11
    - Logitech has drivers Logitech has released drivers & software for webcams for both win64 & vista64. http://www.logitech.com/index.cfm/CA/EN Tag: express studio on x64, then install platform sdk fails Tag: 41774
  - 12
    - Windows Movie Maker Does anyone know wher you can down load Movie Maker besides the updaes, Mine errors out as soon as you start it so I would like to reload it Tag: express studio on x64, then install platform sdk fails Tag: 41771
  - 13
    - Hyperion Ok y'all, this may or may not be news, version 5.10a of Hyperion is on their download site, it lists a 9/06 release but my last download of the file was in Oct. and it wasn't there then, so if you're a user of Via it may be a good idea to take a look-see...;o) Dshai Tag: express studio on x64, then install platform sdk fails Tag: 41754
  - 14
    - x64 on Boot Camp? Does anyone know if intel Macs use 64 bit processors, and whether it is possible to load Windows x64 Edition on them under Boot Camp? Tag: express studio on x64, then install platform sdk fails Tag: 41747
  - 15
    - CRM in a Virtual Machine Can I deploy CRM in a Virtual hosted Machine. Installing in Small Business Server that is hosted as a virtual machine? Tag: express studio on x64, then install platform sdk fails Tag: 41746
  - 16
    - XP x64 as a Host for Virtual Server Any info on why it is not recommended to run XP as the Production Host for Virtual Server? Tag: express studio on x64, then install platform sdk fails Tag: 41745
  - 17
    - Virtual Machine/ Server move to production Any docs or help guides to move a Virtual Machine to Native Machine? Any help would be appreciated. Tag: express studio on x64, then install platform sdk fails Tag: 41744
  - 18
    - WMP11 I'm not sure when this happened, but in case it just happened, WMP11 for XP Pro x64 is now available. http://www.microsoft.com/windows/windowsmedia/download/AllDownloads.aspx Be gentle with me if happened to be the last guy to get the word. :) Tag: express studio on x64, then install platform sdk fails Tag: 41742
  - 19
    - About IO.File.Delete Hello, The IO.File.Delete(Visual Studio 2005) function can not delete files on Vista-64bit, why? And, what changes of API between 32-bit and 64-bit? Thank you Tag: express studio on x64, then install platform sdk fails Tag: 41737
  - 20
    - A must for Windows Vista Here is a great forum which should be visited and bookmarked by all if you are planning on using Windows Vista or are currently using a Beta version. Post your views, reviews, discuss features vulnerabilities, etc. here. http://www.vistatechforum.com Vista Guru Tag: express studio on x64, then install platform sdk fails Tag: 41728
  - 21
    - Adding an FTP network place Whenever I try to add an FTP site as a network place using the 'add network place' wizard, I get an error that says "The folder you selected does not appear to be valid, Please select another". It does this with any FTP URL. I have even tried cutting and pasting the provided example: ftp://ftp.microsoft.com/ . Surely, this is a bug. Has anybody else experienced this? Any workarounds? Tag: express studio on x64, then install platform sdk fails Tag: 41720
  - 22
    - Windows Defender update 1.1.4.1922.8 If you are seeing this update in your notification area and it is installing successfully but coming right back to be installed again, it may be that WD x64 is up to date with .7 and .8 should not be targeting on x64. I am trying to troubleshoot this with Bill Sanderson now at http://www.microsoft.com/athome/security/spyware/software/newsgroups/reader/default.mspx?dg=microsoft.private.security.spyware.signatures&lang=en&cr=US&r=ba8a5542-e994-4ea7-a08a-1b4a0c3afab&mid=a5498a73-8a15-4ff9-9a03-1e11eb229528 Please reply only if you are having a similar experience. Colin Barnhorst (MVP Virtual Machine) Tag: express studio on x64, then install platform sdk fails Tag: 41689
  - 23
    - 64Bit Antivir System Guten Abend, ich suche ein Antiviren Program f=FCr mein Windows 64Bit Edition Betriebssystem. Jetzt habe ich volgende getestet: AntiVir 64Bit Beta (unzufrieden) Avast (kein Shield, Realtime protection) Windows Defender 64Bit Edition ( =FCberzeugt mich nicht wirklich) Ich weiss das es im Moment noch wenige Viren f=FCr 64Bit gibt, jedoch Safty First! Also wenn jemand ein guten Antiviren Programm kennt soll er doch bitte antworten. (PS: Kaspersky hat auch keine 64Bit Schutz, obwohl es das beste AntiViren Programm ist, das es momentan f=FCr 32Bit giibt) MfG Sch=F6nes Wochenedne Stephan Tag: express studio on x64, then install platform sdk fails Tag: 41684
  - 24
    - Question: Mounting partition to NTFS folder. Quirky? Hey all, I recently bought a 300GB SATA drive. It installed beautifully, I got the BIOS configured, Windows found drivers for the device without me even having to do anything, blah blah blah. I used the LDMS to split the drive into two partitions: the first is 200GB and the second is about 80GB (the rest being eaten by the Retail Hard Drive Size Exaggeration Monster). I then mounted the partition into an NTFS folder, and tried to copy some files. Unfortunately, the copy failed almost immediately, saying that the file could not be found. I found this odd, as the file was certainly there. So I tried to delete the folder it created. Explorer acted as if the folder were in use, saying Access Denied. I was very confused about this bizarre behavior. I have another partition on an IDE drive mounted into a folder, and it works great. I tried reformatting the partition again, changing the cluster size, making sure the cable was plugged in well, and (of course) rebooting. I also ran Scandisk, which found no errors. As a last resort, I mapped the drive to a drive letter (rather than a folder). To my great surprise, everything worked. The files I could not previously copy (it is worth noting that it was the same files each time which refused to copy) now copied perfectly, and I could delete the previously undeletable folders. To make sure I wasn't going crazy, I remounted it into a folder. Bam, the same files refused to copy, and the folders gave Access Denied errors again. I really want to mount this partition in a folder. Can anyone give me hints as to what I might be doing wrong about this? Is it a SATA/IDE issue, since that's the only difference between the partition I have mounted to a folder and the ones which are failing? More standard info: -The SATA drivers I'm using are apparently included with Windows. My motherboard manufacturer does not have 64-bit drivers for the SATA interface. The motherboard is an nForce 3 chipset (MSI K8N Neo2). Thanks much, Nathan Tag: express studio on x64, then install platform sdk fails Tag: 41682
  - 25
    - x64 Beta Test Opportunity I realize that most of the folks here are basically end users - we don't get all that many Server questions, after all. But at least I'm reasonably sure you all have at least one x64 machine or are thinking about one. Which would be cool for some products, but here's a chance for those of you with some _serious_ hardware to get in on the ground floor of a new Microsoft server offering - code name is Centro, and a description and a link to apply for the beta are in Kevin Beares blog, here: http://blogs.technet.com/kevin_beares/archive/2006/10/24/so-what-is-centro-you-ask.aspx I know that if Kevin is running the beta, or heavily involved, it will be fun and we'll have good communications. But before you all go running over to his site, let me warn you up front. The MINIMUM requirement is 3 - x64 machines to use as servers, and at least two client machines. That's a serious hardware hurdle, but the result looks like it's going to be a really cool and interesting product. So, if you're interested, now is definitely the time to apply. I hope to see at least some of you there. -- Charlie. http://msmvps.com/xperts64 Tag: express studio on x64, then install platform sdk fails Tag: 41672

http://msdn.microsoft.com/vstudio/express/visualc/download/

web install of x86 platform sdk gives error message, refuses to install

I get WebSetup error msg:

"error: setup was started in non-native or WoW environment"

Dell Xeon, Win XP x64 Pro sp1

Top