WinRAR 3.60 released

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - windows 64 xp crash Ihave just gotten this pc made last week. I have used it for 2days now and have gotten 2 death screens. one a day ago and on today. I have a SCI u2w cdrom, controllerwith a plextor 40x and a 8/20 bundled burner combo sys. I had done some WIN updates for this OS. Three non critical up dates. the one I suspect causing my troubles was an IDE controller. I lost one of my plextor cdrom the 40X. Windows did not see it also upon bootup lost that drive reconizition which was F: and bootup was hanging on IDE Scan which is a Atlas Fireball 20G. My system configuration is Plextor 40X cdrom, an 8/20 Burner with an a removable SCI drive an atlas fireball which these components were used in my old system with WIN 98SE on the hard Drive. I have WIN XP 64X on a raptor 70G hard Drive. Since the update of the IDE controller which at bootup/scan reconizes the atlas now but the WiN 64X OS is now hanging on the logo screnn . I cant get into safe mode because after selecting begins windows logo then hangs up. What can I do. I just got this COMP. done last week and have not made a Recovery disk. I have try all functions in F8 mode but all functions hang on the XP logo and system Frezzes causing another hard boot. Does any one know how to recpover. I have OEM disk and comp. company that built sys states only covers hardware.... What can I do... Please help. Also I am running AMD4400 X2 Chip with Geforce 7600 GT Video Card with @Gig Ram. I have also since usuing this new computer have gotten a stack dump error. Tag: WinRAR 3.60 released Tag: 37511
  - 2
    - Office 2003? Quick question: I'm completely new to WinXP Pro x64. Can I install Office 2003 on it? Anything special I need to think about? Thanks! / Per Tag: WinRAR 3.60 released Tag: 37499
  - 3
    - PCI tree I was wondering if any of you know about a utility called PCI tree(www.pcitree.de) for x86 based applications. Is there a version that works on xp64. Tag: WinRAR 3.60 released Tag: 37497
  - 4
    - DVD Shrink & Windows Media Player Hey Everyone Can anyone tell me if you can and how to take a downloaded movie from 360Share which plays in Media Player(Windows) and put it into DVD Shrink 3.2 and then burn it to disk. Tag: WinRAR 3.60 released Tag: 37489
  - 5
    - xp pro networking I have a gateway, (old one) w/ xp pro on it, i got hacked the other day and now i cant log onto the admin (user) account, the only account left is a restricted acct my girlfriend uses. Is there any way to get recovery or password, the network its restricted my pc so there is no way to get the cd rom drive to be recognized by windows. all i have access to is A: floppy, and i don't have permission to add/remove programs or modify the registry -- jt smith Tag: WinRAR 3.60 released Tag: 37476
  - 6
    - Windows Desktop Search 3.0 Beta 2 for Windows x64 versions There are updated versions of Windows Desktop Search at http://support.microsoft.com/kb/917013 Tag: WinRAR 3.60 released Tag: 37473
  - 7
    - Is XP 64-bit Edition Discontinued? Looking for an OS to install in my PC found this interesting link. http://www.newegg.com/Product/Product.asp?Item=N82E16837102065 Tag: WinRAR 3.60 released Tag: 37467
  - 8
    - Cannot install iSCSI Initiator I have a fresh installation of Windows 2003 Server Standard Edition R2, 64 bit that I have set up. The server configuration is an Intel Xeon processor (processor model 7030, 2.8 GHz) with 2GB RAM. I am trying to install the iSCSI Initiator build 1895, but I keep getting this error: Initiator-2.02-QFE-bld1895-ia64fre.exe - Machine Type Mismatch --------------------------- The image file c:\5bf80b39386613ece43b5e78\update\update.exe is valid, but is for a machine type other than the current machine. Does this version not support the chipset the OS version and chipset that I have, or am I using the wrong installation program? Out of desparation I've tried with all of the other iSCSI installations but they all give the same sort of error. Any ideas? -- Regards, Ross Chappell EPI Internet Direct http://www.epidirect.com Tag: WinRAR 3.60 released Tag: 37466
  - 9
    - ...file is missing or corrupt: <Windows root>\System32\ntoskrnl.e I'm getting this error at boot. Environment: RAID 0+1, WinXP Pro 64bit, 1G Dual Channel DDR2, 4 160G Maxtor SATA, Intel 3.0 HP 64bit processor, Intel 945gtp MB, Samsung 970 Digi LCD (this matters). Crash resulted from my attempting to get a pci-express ATI all in wonder Vid card installed. Card was not compatible with OS. I removed it and went back to the on-board Intel Video. When I went to install the software to that controls the Samsung LCD and launched it, my system immediately shut down. On restart...the error. 2 Questions: 1. Please suggest how to repair this file and boot. 2. How do I access my data? I pulled one drive and attempted to access it from another RAID 64bit system and I shows 240+Gigs and I cannot access the data. It is only a 160G drive? I think I'm going to give up on the 64bit. Video cards, printers, Acrobat, so many things not compatible. It was an interesting ride but now I'm concerned about the data. Thank you in advance and happy helping! Benjamin Tag: WinRAR 3.60 released Tag: 37465
  - 10
    - HELP INSTALLING MS PRO X64 TRIAL VERSION I PERFORMED THE FOLLOWING ACTIONS: 1. DOWNLOAD THE ISO FILE FROM MS DOWNLOAD CENTER. 2. CUT A DATA CD USING NERO 3. ATTEMPTED TO LOAD CD BUT CD WON'T START 4. USED EXPLORER TO EXECUTE SETUP.EXE PROBLEM: THERE IS NO SETUP.EXE ON THE CD. ONLY THE ORIGINAL ISO FILE THAT WAS DOWNLOADED FROM MICROSOFT IS ON THE CD. These actions are in accordance with the Microsoft e-mail instructions. What am I doing wrong? What is suppose to generate the SETUP.exe on the CD. Thanks. GENE Tag: WinRAR 3.60 released Tag: 37457
  - 11
    - HELP! confused about Windows XP x64 and live in China I was given a beautiful new computer all in English. Then I tired to downlaod my pictures from my digital camera, and it wouldn't work. Had no idea why. Then I fiddled around and it finally worked. Then I bought a webcam and a HP All in One 1408. I found out that I had a x64 Operating System and had to downlaod something from the HP website. I finally got my printer working, but I don't have all the nice stuff that is found on the disc as it is not compatable with my comptuer. Things such as ink levels would be nice to know. My webcam is a Chinese model and I can not seem to find a program that would make it work. Does anybody have any suggestions? I was assured in the store that it would work on the x64 system. Tag: WinRAR 3.60 released Tag: 37454
  - 12
    - OEM Label I need to replace my computers case any ideas of how to remove the OEM label intact and stick it to a new case, or order a new label? -- Thanks in advance Dave Tag: WinRAR 3.60 released Tag: 37447
  - 13
    - Confused with the WinXP Prof x64 edition CD Hi, I am new to the newsgroup and have a question regarding the WinXP Professional x64 Edition. I recently received the WinXP Prof. x64 Edition CD and I am confused. After receiving the CD, it says that it expires after 180 days and if I elect not to upgrade to the x64 edition, I would have to reinstall the original operating system (32 bit WinXP Professional) which is fine, but it doesn't tell me what happens after the 180 day expiration if I want to keep it. Will it automatically ask you to re-register the product and that becomes your WinXP x64 edition or will I have to go and buy it --which I thought I read somewhere that you can't buy the x64 edition. Your help would be greatly appreciated, thanks in advance. Tag: WinRAR 3.60 released Tag: 37445
  - 14
    - Acessing 64 bit registry view from 32 bit application running on Windows 2003 SP1 Hi, To access 64 bit registry view from 32 bit application on Windows 2003 SP1, Microsoft has introduced KEY_WOW64_64KEY. Example: ::RegOpenKeyEx( regkeyRemoteComputer.m_hkey, strSubKey, 0, KEY_WOW64_64KEY | KEY_QUERY_VALUE, &regSubkey.m_hkey ); I would like to confirm if KEY_WOW64_64KEY flag can create any problems dealing with 32 bit registry views. My Observation is: While testing the remote registrty access code containing the function metioned above, I've realized that KEY_WOW64_64KEY flag does not create any problem accessing 32 bit registry and 64 bit registry view from 32 application runinng on OS other than Windows 2003 SP1. I mean, I could read few 32 bit registry keys inspite of using this flag and that too on Windows XP SP1 box. I think KEY_WOW64_64KEY is bit mask, it will be used only if 64 bit OS registry is accessed. For other OS (32 bit), it would not give any error and work as expected. Please correct me if I am wrong. My goal is to see if I can write registry access code with out checking remote computer machine and OS version(32 bit\ 64 bit). I am worried if there are any situations (like accessing security related things) where KEY_WOW64_64KEY can behave wrong for 32 bit registry view. Please lets us know. Regards, Rupesh Tag: WinRAR 3.60 released Tag: 37443
  - 15
    - invalid command line I keep getting a message saying invalid command line perimeter when I try opening/downloading Virtual Basic 6.0 Setup Toolkit. Is there a way that I can fix this? Tag: WinRAR 3.60 released Tag: 37439
  - 16
    - A welcome difference between x64 and Vista x64. When opening a link from Windows Mail in Vista x64, IE7+ opens a 32-bit browser instead of the 64-bit browser from OE in x64. Tag: WinRAR 3.60 released Tag: 37435
  - 17
    - OT: Anybody know the exe to put a computer into Standby? I guess I could've asked elsewhere, but since I hang out here... Thanks -Larry Tag: WinRAR 3.60 released Tag: 37425
  - 18
    - I need help i need javasun for 64 bit can help me please i need java sun for 64 bi -- Kuwai [image: http://www.thermaltake.com/+en_image/VB5001SNA.gif My P Athlon 64 FX-5 Windows XP 64-bit Edition for E DFI-LANPART 2GB OCZ DDr400 CL2 Dua GeForce 6800 Ultra 256MB DDR3 PCI-E X2 with SLI Mod Seagate 250 M 680 Wa ----------------------------------------------------------------------- Kuwait's Profile: http://www.64bit-world.com/forums/member.php?u=178 View this thread: http://www.64bit-world.com/forums/showthread.php?t=4039 Tag: WinRAR 3.60 released Tag: 37423
  - 19
    - Icons lost on settings tranfer Hi all, I just installed x64 on a new system, then transferred files and settings from a previous instance on another machine using the files and settings transfer wizard. Most of my stuff came through ok, but I lost some windows icons somehow, most notably my Recycle Bin and My Documents Icons. Has anyone seen this before? Is there any fix? In XP Pro I would've just repaired them with TweakUI, but obviously that's not an option. FYI- I tried doing an "Upgrade" install over the broken one, and when that didn't work, I also tried a "repair installation" from the Setup screen- all to no avail. Thanks for all input! Tag: WinRAR 3.60 released Tag: 37422
  - 20
    - Restoring a Back-Up? I am about to re-install x64 from scratch, (no, Repair Install didn't help me) I've zapped the Partition and I am set to go. I have a fresh back-up of all the essentials performed by Nero. Now, recalling all the really good advice and the general tips'n tricks that flow through this forum, I have in mind to re-install to a small system partition (probably some 4GB's). The Back-up totals 13+ GB, so I will have to re-direct the greater part to a separate partition. Now, several people have made this wise proposal to put 'My Documents' and other stuff on such a partition, but I am falling into doubts about how that will reflect on the restoration process? The 'Program Files' directory is not trivial in size, can I move that as well? I havn't tried restoring in this way before, suddenly it sounds quite intimidating. A few pointers, to not ignore something really important, would be appreciated. Tony. . . Tag: WinRAR 3.60 released Tag: 37411
  - 21
    - 5.3 Ghz dual core pentium machine on eBay! I happened to be surfing around on eBay UK and caught this 64bit gem: http://cgi.ebay.co.uk/Pentium-Dual-Core-64Bit-5-3Ghz-1Gb-533Mhz-DDR2-256GFX_W0QQitemZ200018993055QQihZ010QQcategoryZ179QQrdZ1QQcmdZViewItem Now the reasoning supplied in the listing is that since it is a dual core processor and each core runs at 2.66 Ghz, "2 Cores x 2.66 Ghz each," the system is running at 5.3 Ghz. Honest. Scroll down to the Specs and check Processor. Big red letters. Would you buy from this knowledgeable reseller? Tag: WinRAR 3.60 released Tag: 37406
  - 22
    - New ATI drivers Well, Carlos is offline for a bit, so I guess I'd better jump in and post this. ;) New ATI drivers released. Version 6.8. -- Charlie. http://msmvps.com/xperts64 Tag: WinRAR 3.60 released Tag: 37405
  - 23
    - XP x64 - XP Pro Upgrade I just bought a new computer which came preinstalled with Windows XP Home Edition. I tried to upgrade to Windows XP Professional, but got the following error: "setup cannot continue because the version of windows on your computer is newer than the version on the cd." I did some research and found out that it was because the version currently installed is 64 bit and Windows XP Pro is 32 bit. My first question is whether I can upgrade to Windows XP Pro using the upgrade CD and the second question is what are the implications of moving to a 32 bit operating system and the implications on the drivers that came preinstalled with the computer. Thanks Tag: WinRAR 3.60 released Tag: 37397
  - 24
    - ROM/DVD device won't read DVD's I think that I have mistakenly deleted files necessary to operate the DVD (read mode). CD-ROM is OK. System check reports that the device is OK, but still won't read a DVD. I have new S/W to load, and it is in DVD format. Anyone know where I can find drivers for a generic CD-ROM/DVD? The computer is a refurbished DELL 2.4 GHz., and has no XP Disc. Of course, the computer is out of warranty. I have a disc for another computer with the XP OS, but not sure if I can get the files that I need off of this disc or not. Any help would be greatly appreciated. Tag: WinRAR 3.60 released Tag: 37391
  - 25
    - Perhaps you'd better sit down now! Hi, all. I just recieved some shocking news - well, let's call it a rumour, at this stage. Word is out that none of the current line of graphics cards will be upgradeable to accomodate DX10 - such that they will all in fact be worthless the day DX10 ships. Is there any bit of truth in that? Any way to find out? I sure hope that this is yet another misinterpretation of the term 'backwards compatibility', which could mean that DX10 being installed it would still be running an upgraded form of DX9 and not taking advantage of the upgraded DX10 specifics. What ya' all say? Tony. . . Tag: WinRAR 3.60 released Tag: 37390
- Next
  - 1
    - cant burn cd/dvd just installed a pioneer dvr-109 dvd-rw. now x64 only recognizes both my dvr and cdrw as CD-only drives, no burn capability. suggestions? tried updating firmware in dvr already. Tag: WinRAR 3.60 released Tag: 37388
  - 2
    - limited account user I have a Dell Computer with the following: Operating System: Microsoft Windows XP Processional Operating System Version: 5.1.2600 I want to allow programs to be run by a limited account user. I have Quickbooks Pro and it can only be run by the Admin account user. When I try to open it in the limited user account I get an error message window entitled: Microsoft Visual C++ Runtime Library. The message is: Runtime Error Program c:\program\intuit\quickbooks 2005\qbw32.exe Abnormal program termination Please communicate back to me how to change the settings to allow programs to be run by both accounts or if necessary just the limited account user. Or tell me where and what to read. I have looked all thru the â??Help and Support Centerâ?? and have not found out how. Thanks, Tag: WinRAR 3.60 released Tag: 37385
  - 3
    - Built in backup system Hi I am running Windows XP 64 bit but there does not appear to be a backup facility to back your files under Accessories/System Tools. I am assuming it does have this facility like the one in Windows XP Pro. If it does how can I re-install it. TIA Tony Tag: WinRAR 3.60 released Tag: 37382
  - 4
    - Wireless PCI Adapter Who makes an adapter that comes with 64 bit drivers. Tag: WinRAR 3.60 released Tag: 37378
  - 5
    - My girls Meet girls? +91 9810577227 info@lenstar.org Tag: WinRAR 3.60 released Tag: 37377
  - 6
    - Fatal Error During Installation In up grading from Trend Micro Internet Securty 2005 to 2006, using Trend Micro's installer, I got a Fatal Error. The installer stated I need to reboot to finishing the removal of 2005. That messages is as far as I got in the Installer. Next I went to control Panel and then add/remove software, the older version ,2005, was still registared. I then used the remove button and about 2/3 of the way it stops and pops up the "Fatal Error During Installation". Next I went to Windows Explorer, and checked the Program Files, the old software was replaced with the new 2006 software and I cliced on set up and got a totally new message. It went as follows: "set up has detected a conflicting application, Trend Micro PC-cillin Internet security 2005. Remove the application to continue. Click YES to remove the application. Click NO to abort the installation." When I click YES up pops a meter showing that the program is working and then it say reboot to make the changes. I reboot and start installing and immediately get "set up has detected a conflicting application, ect..." I'm at a loos of what to do next. Tag: WinRAR 3.60 released Tag: 37363
  - 7
    - Windows Vista X86 and x64 PROBLEMS WITH THE INTERFACE I have a problem with my VISTA X86 the computer get freeze for seconds when i tried to use it on a AMD64 Athlon my computer does not support the vistax86? if my CPU is a x64???? i also have the CD-KEY from microsoft and it says that i can use it 10 times and i only installit one and at the second one the windows activation does not let me use it..... MOTHER BOARD ASUS K8N-E DELUXE SERIES 2GB DDR 333 KINGSTON (2X1GB DDR333) NVIDIA GEFORCE FX5500 256MB DDR 266 1 HDD 200GB IDE MAXTOR UDMA 1 HDD 250GB SATA SEAGATE SOUND BLASTER AUDIGY 2ZS Tag: WinRAR 3.60 released Tag: 37362
  - 8
    - Why my Windows Vista X86 does not work on AMD Athlon 64 I have a problem with my vista x86 my mouse does not work propertly the windows get freeze for a little bit of seconds i try both ways.... upgrade and clean instalation but stil got the same problem and my cd-key cannot register anymore and i only used 2 times and according to microsoft i'm able to use it 10 times.... Please Help... ASUS KN8-DELUXE 2GB DDR 333 256MB VIDEO NVIDIA GEFORCE FX5500 1 HDD IDE 200 GB (BOOT) 1 HDD SATA 250GB 1 HDD IDE 120 GB SOUND BLASTER AUDIGY 2 ZS Tag: WinRAR 3.60 released Tag: 37361
  - 9
    - CD or DVD Won't Read I am running Vista 64 Build 5472. When I insert a CD or DCD and open Explorer I get the Vista Burn window. I do not want to burn but just read the CD or DVD. Any solutions. -- Gabby Tag: WinRAR 3.60 released Tag: 37358
  - 10
    - Read Lady only 24-Hrs +91 9810577227 Send email to info@lenstar.org get access code. Tag: WinRAR 3.60 released Tag: 37353
  - 11
    - Cannot install xp x64 My installation hangs when setting up my video, or , seems to. I cannot get past the point when my screen goes black when it restarts the video. Any help? I am running an Asus P5AD22 Deluxe mobo w/ a dual core Intel 3.6 cpu. Tag: WinRAR 3.60 released Tag: 37346
  - 12
    - Logitechs terrible customer support Please read before buying anything Logitech Heres the link about x64 webcam drivers at the Logitech forum http://forums.logitech.com/logitech/board/message?board.id=quickcam_software&message.id=831 Tag: WinRAR 3.60 released Tag: 37344
  - 13
    - 1.1 Framework... Hello: I have an implementation of Windows 2003 Standard (64-bit) running on AMD processors. This server is going to run an application called Archive Manager. The vendor says it has to run on 1.1 Framework (32-bit). At the beginning of my implementation they told me (64-bit) was fine so I spec'ed a high end system. When I went to install the application I got a few warnings. They then changed there tune and said if it runs on a (64-bit) system it was not supported. Are VP's are trying to talk to there VP's but they are moving slow. I tend to think it will work and they are just feeding me a canned response. I have googled this and found a number of articles regarding 1.1 Framework on (64 bit) systems. Does anyone have any advice or experience on this? Thanks. Harrison Midkiff Tag: WinRAR 3.60 released Tag: 37338
  - 14
    - Vista beta available again! Offer ends soon Only three days left. http://www.resellerratings.com/c-1/s-1/av-1/id10550.html Please note the "quiz" answers on the site linked above before you go to the Vista site. My discs are on the way! Tag: WinRAR 3.60 released Tag: 37332
  - 15
    - Dell NAS 2003 r2 64 bit server NFS mapping I cannot get any UNIX accounts (other than root) to have permissions to access an NFS mount. I have copied to the NAS the passwd and group file that is the same for all *NIX machines. Can mount as root and create files, but other users have permission denied when trying to navigate into mount. In the past I have chmod 777 the mount directory before mounting to it to ensure all users have permission to use the mount point. When I mount the share, the directory changes to drwx----- and the UID/GID changes to numeric numbers. Microsoft Services for NFS settings: User Name Mapping Server: localhost User Name Mapping : Use Password and Group files Simple Mapping: Unchecked User Maps: 1-to-1 mapping of root and a single user account. Group Maps: root=>Administrators user=>Users Server for NFS: Default settings Share properties: Sharing Permissions: Everyone - Full control NFS Sharing: Allow anonymous access is unchecked. Permissions: All Machines Read-Write Allow root access is checked. Here is my current configuration: Network: Peer-to-Peer configuration no domain controllers or NIS servers. Hardware: Brand new PowerEdge 2950 with Windows 2003 R2 Fedora Core 4 servers trying to mount as clients Does anyone have a step by step example using the new R2 controls to perform the simple task? We have tried all configurations we can think of and are stuck. Thanks- Rick Tag: WinRAR 3.60 released Tag: 37324
  - 16
    - Performance Data Helper Error!!!!! hi, I'm using this PdhGetFormattedCounterValue() API in XP and its working fine, but when used in Windows Vista (Beta Version) it is giving Invalid data error... PdhGetFormattedCounterValue() is returning "PDH_INVALID_DATA" for counter "\Processor(_Total)\% Privileged Time" and "\Processor(_Total)\% Processor Time" plz help Tag: WinRAR 3.60 released Tag: 37321
  - 17
    - Both my launch of windows screen... and web pages don't launch appropriately Tag: WinRAR 3.60 released Tag: 37311
  - 18
    - 64 bit wiki This is an old one, but answers many questions about 64-bit operating systems. http://en.wikipedia.org/wiki/64-bit -- Virg Wall, P.E. Tag: WinRAR 3.60 released Tag: 37299
  - 19
    - Perform - cannot connect to x64 from x32. Hi, 1) Run perfmon on windows xp+sp2 (x32). 2) Add Counters -> \\remote-server --> remote-server is an windows xp x64+sp1 (2003 version) and is on the same network (domain) as #1.. I get an error "Unable to connect to remote machine" I tried http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q300702 (I am an admin user on both the machines...) - Have all the rights to all the stuff mentioned in the KB article.. I can connect to x32 from the x64, though... Any ideas? Tag: WinRAR 3.60 released Tag: 37296
  - 20
    - ntune and x64 lock up My system was hanging up just at the point where you logged in and saw the wallpaper, but the bar at the bottom on the screen and shortcuts didn't appear. I could get the task manager to run, and stopped ntune to get the system to boot. It didn't happen every time, but often. I uninstalled ntune on a hunch, and the problem is history. Just something to keep in mind if you are having problems and are looking for a straw to grasp. ;-) Tag: WinRAR 3.60 released Tag: 37287
  - 21
    - COleDateTime not defined Hi, it seems COleDateTime is not defined in Platform SDK for Windows Server 2003 R2 when compiling C++ unmanaged code for the AMD64 platform. Is this class available in 64-bits? I use ParseDateTime and I don't think there is any equivalent in unmanaged code. I hesitate to use managed code in case the .NET Framework will not be installed on the target system, although I don't know how likely that would be for someone with the 64-bit Windows OS. Tag: WinRAR 3.60 released Tag: 37285
  - 22
    - x64 and Canon MF8170c I was all gung-ho to install x64 on my new Dell workstation. Everything went great. The install was smooth and all seemed well....until I needed to print. I've got a Canon MF8170c (color multifunction laser). Canon doesn't show it as compatible. Do I have to fall back to the regular XP Pro or is there something I can do to print via network or USB? HELP! Tag: WinRAR 3.60 released Tag: 37282
  - 23
    - 91.36 x64 nVidia video driver Finally, a new x64 video driver for nVidia GPUs: ftp://download.nvidia.com/Windows/Quadro_Certified/91.36/ It says it's for Quadro cards, but the INF file supports a wide variety of other cards. Tag: WinRAR 3.60 released Tag: 37276
  - 24
    - XP64 (c:RAID Array) & XP32 (SATA) Dual Boot Probs Hello I currently have XP64 installed on a RAID array and have done for som time. I now need to install XP32 for work purposes. I have installed a new hardrive to do this and installed XP32Pro following all th instructions. At the end of the installation, the computer restarts and I get a error message saying that windows has failed to start properly. I can no get XP32 to load at all. When I switch teh boot device order back t removable/HD etc, I do get a boot menu and XP64 still boots fine. Bu again, when I try XP32 , I get the same message. Do you know what need to do to get this to load?? Just some more info, here is what is detailed in my boot.ini.. [boot loader timeout=3 default=multi(0)disk(0)rdisk(1)partition(1)\WINDOW [operating systems multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /NoExecute=OptI multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP 64" /fastdetect /NoExecut Under windows XP64, the C: drive is my RAID array and F: is the driv that contains the SATA WD drive for XP32. What I did notice was that when was installing XP32, it noticed the RAID array as d: and the SATA WD a c:. When I am in Win Recovery console, th XP version in on c: and m old XP64 and all my other stuff is on d:. Something really strabg seems to be going on with my drives When I have loaded into XP64, they appear as normal (i.e RAID as C: an new drive with XP32 as f:.) Something definitely seems to be going o with my drives Thank Chri -- cstange ----------------------------------------------------------------------- cstanger's Profile: http://www.64bit-world.com/forums/member.php?u=244 View this thread: http://www.64bit-world.com/forums/showthread.php?t=3950 Tag: WinRAR 3.60 released Tag: 37247
  - 25
    - SATA question - a quickie! A question just landed in my in-box, someone who read one of my contributions somewhere wants to know if his SATA 150 HD will work on his newly acquired SATA2 only Mobo. My instinct says that with the suitable motherboard(chipset) driver, it should work as a SATA 150 drive. Any objections? Tony. . . (I will, of course, instruct the person to be informative of the general context in the future and to post to the un-named group for everybody's benefit) Tag: WinRAR 3.60 released Tag: 37233

Yeah, I know.
This ain't no x64 app.
But it is a very good multiformat x86 archiver program that integrates quite
well in the x64 realm.
Go to www.rarlabs.com and download a free trial in your favourite language.
Carlos

Top

Re: WinRAR 3.60 released by Charlie

Charlie
Thu Aug 24 00:39:05 CDT 2006

Welcome back. :)

--
Charlie.
http://msmvps.com/xperts64

Carlos wrote:
> Yeah, I know.
> This ain't no x64 app.
> But it is a very good multiformat x86 archiver program that integrates
> quite well in the x64 realm.
> Go to www.rarlabs.com and download a free trial in your favourite
> language. Carlos

Top

Re: WinRAR 3.60 released by Carlos

Carlos
Thu Aug 24 10:48:01 CDT 2006

Thanks, Charlie.

"Charlie Russel - MVP" wrote:

> Welcome back. :)
>
> --
> Charlie.
> http://msmvps.com/xperts64
>
>
> Carlos wrote:
> > Yeah, I know.
> > This ain't no x64 app.
> > But it is a very good multiformat x86 archiver program that integrates
> > quite well in the x64 realm.
> > Go to www.rarlabs.com and download a free trial in your favourite
> > language. Carlos
>
>
>

Top