Tony
Mon Sep 05 12:39:29 CDT 2005
Beyond this piece of sound advise from Dominic, I should add that you might
want SATA support up and running before attempting to install win64, as most
support CD's still is 32bit, I probably would consider installing something
else first and make sure everything is up and in order.
It is my experience that you could easily convert minutes to hours waiting
for this, it will come back eventually, perhaps only to tell you that no
disk was found. I am not sure if it has any impact if you have SATA only, or
a combination of SATA/IDE, an option is to remove all discs that you will
not use for the installation. But I do agree with Dominic, hook up
everything that you will need!
Tony. . .
"Dominic Payer" <dominic@dcpayer.freeserve.co.uk> wrote in message
news:uk6dsPRsFHA.1032@TK2MSFTNGP12.phx.gbl...
> Have you updated your BIOS to an x2 compatible version and checked the
> BIOS settings?
> See
>
http://www.abit-usa.com/products/mb/bios_revision.php?categories=1&model=278
>
> If you are not installing on a RAID array I wouldn't install the RAID
> drivers during setup.
>
> If you intend to use any of the cards with x64 I would leave them in
> during installation.
>
>
> "Joshuarat" <Joshuarat@discussions.microsoft.com> wrote in message
> news:CF23F975-EBE4-40B4-91FA-E738200AC97A@microsoft.com...
>> Abit AN8 ultra, sata hard drive, 2 Gig memory. AMD64x2 socket 939
>> Removed all cards but graphics, unhooked LAN connection.
>> Started setup, loaded sata drivers, raid drivers. (though only a single
>> hard
>> drive)
>> deleteted complete partition and reformatted via install process...
>>
>> 4 hours later its still installing....
>>
>> re-did everything...same result..
>>
>> Is this me? am I missing something?
>>
>> any suggestions?
>
>