Standby mode

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - JAVA RE 5.0 update 6 for x64 is out Sun has just released its update 6 for Java. http://java.sun.com/j2se/1.5.0/download.jsp Versions for x86 and x64 are available for download. Still no support for browsers on x64 platforms! http://java.sun.com/j2se/1.5.0/system-configurations.html x86 version is still useful for IE 32-bit. Carlos Tag: Standby mode Tag: 21569
  - 2
    - Westell modem Have been dual booting XP Pro and XP 64 PRo since 64 was released with the usual driver problems but able to use it. Now I have updated to Version DSL and their westell modem is not compatible. Have had no luck finding drivers. Anyone found a work around or know of a free Dialup ISP? Any assistance will be greatly appreciated. Richard Tag: Standby mode Tag: 21562
  - 3
    - Does Microsoft support its own hardware? Hi, Someone has any information about x64 Pro supporting Microsoft Wireless Optical Desktop Sets? I didnâ??t find any related information @ Microsoft website. Regards Tag: Standby mode Tag: 21550
  - 4
    - DVD/CDROM Driver won't load I installed x64 last night with no problems, installed Office 2003, Koday EasyShare, and then out of nowhere I can't access my DVD-ROM or DVD-RW. Device Manager says "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" I've done all the normal things I can think of, uninstalling, reinstalling, deleting the actual driver files and reinstalling. Any ideas? Tag: Standby mode Tag: 21548
  - 5
    - Problems with Outlook I did these steps: 1. Install WinXp64 in a new installation (formating the HDD) 2. Install Office 2003 in a striped volume. When I configure Outlook to work with Exchange 2003 SBS, the first time works good, then I quit and when I try to open again the following error stop me: No se pude iniciar Microsoft Office Outlook. No se puede abrir la ventana de Outlook. No se puede abrir este conjunto de carpetas. La conexión a Microsoft Exchange Server no se encuentra disponible. Outlook tiene que estar en línea o conectado para realizar esta acción. Can not start Microsoft Office Outlook. Can not open the Otlook window. Can not open the collection of folders. The conetion to Microsoft Exchange Server is not avaible. Outlook have to be on line or conected to acomplish this action. Then I run the officeupdate and the windowsupdate and the problem is the same Help me please. Thanks. Tag: Standby mode Tag: 21534
  - 6
    - Drives missing I have just upgraded and dual booted my system, Windows 64bit wont see my old 32bit Windows Sata hard drives at all???????? Any suggestions please. Adam. Tag: Standby mode Tag: 21529
  - 7
    - thunk.exe inf file missing I just installed xp64 pro and get the error: "thunk.exe inf file missing" when I try to install the drivers for my ati radeon card. Anyone have experience in solving this? asus A8N-E mobo, AMD Athlon64 3200 cpu... Tag: Standby mode Tag: 21523
  - 8
    - =?Utf-8?Q?Windows=C2=AE_installer_has_encounter?= It shuts down when I try to install just about anything using the windows installer :-/ Really annoying, and I've tried any and all tricks I could find. Bonus info from trying to install jre-1_5_0_05-windows-amd64 (Java for x64): Faulting application msiexec.exe, version 3.1.4000.1433, faulting module unknown, version 0.0.0.0, fault address 0x0023459e. Tag: Standby mode Tag: 21516
  - 9
    - MS CRM 1.2 in W64 bits Hi Can I install the Microsoft CRM v1.2 on a Windows Server Standard 2003 64 bits server? Thanks, Andre Tag: Standby mode Tag: 21509
  - 10
    - MS draws 64-bit line in the sand... http://www.windowsitpro.com/Article/ArticleID/48600/48600.html Tag: Standby mode Tag: 21503
  - 11
    - System Restore -to start with...... I have been unable to use system restore at all on my new PC and have tried talking to supplier with little help being forthcoming. Restore points exist and can be created apparently - however, they consistently fail to restore.None of the restore points will actually restore - simply get the standard error message the system cannot be restored to xx/xx/xx. This is consistent. I've turned system restore off, rebooted, and turned it on again and create new restore points to no available. Driving me frantic now. Spec is: Model : AMD Athlonâ?¢ 64 X2 Dual Core Processor 4400+ Speed : 2.21GHz Cores per Processor : 2 Unit(s) Threads per Core : 1 Unit(s) Type : Dual-Core Internal Data Cache : 2x 64kB Synchronous, Write-Back, 2-way set, 64 byte line size L2 On-board Cache : 2x 1MB ECC Synchronous, Write-Back, 16-way set, 64 byte line size Mainboard Bus(es) : PCI PCIe USB FireWire/1394 i2c/SMBus MP Support : 1 Processor(s) MP APIC : No System BIOS : Phoenix Technologies, LTD ASUS A8N-SLI DELUXE ACPI BIOS Revision 1011 System : System manufacturer System Product Name Mainboard : ASUSTeK Computer INC. A8N-SLI DELUXE Total Memory : 2GB DDR-SDRAM Chipset 1 Model : Advanced Micro Devices (AMD) Athlon 64 / Opteron HyperTransport Technology Configuration Front Side Bus Speed : 2x 1005MHz (2010MHz data rate) Total Memory : 2GB DDR-SDRAM Memory Bus Speed : 2x 201MHz (402MHz data rate) Video System Monitor/Panel : Plug and Play Monitor Adapter : NVIDIA GeForce 7800 GTX Imaging Device : EPSON Stylus CX4700/DX4800 Physical Storage Devices Removable Drive : Floppy disk drive Hard Disk : Maxtor 6L250S0 (234GB) Hard Disk : EPSON Stylus Storage USB Device CD-ROM/DVD : SONY DVD-ROM DDU1615 (CD 40X Rd) (DVD 5X Rd) CD-ROM/DVD : SONY DVD RW DW-Q28A (CD 48X Rd, 48X Wr) (DVD 6X Rd, 6X Wr) Logical Storage Devices 1.44MB 3.5" (A:) : N/A Windows (C:) : 229GB (211GB, 92% Free Space) (NTFS) CD-ROM/DVD (D:) : N/A CD-ROM/DVD (E:) : N/A Removable Drive (F:) : N/A Peripherals Serial/Parallel Port(s) : 1 COM / 1 LPT USB Controller/Hub : Standard OpenHCD USB Host Controller USB Controller/Hub : Standard Enhanced PCI to USB Host Controller USB Controller/Hub : USB Root Hub USB Controller/Hub : USB Root Hub USB Controller/Hub : USB Composite Device USB Controller/Hub : USB Printing Support USB Controller/Hub : USB Mass Storage Device FireWire/1394 Controller/Hub : Texas Instruments OHCI Compliant IEEE 1394 Host Controller FireWire/1394 Controller/Hub : OHCI Compliant IEEE 1394 Host Controller Keyboard : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard Mouse : PS/2 Compatible Mouse MultiMedia Device(s) Device : Creative SB Audigy 2 ZS (WDM) Device : Creative Game Port Printers and Faxes Model : EPSON Stylus DX4800 Series Power Management AC Line Status : On-Line Operating System(s) Windows System : Microsoft Windows XP/2003 Professional (Win64 x64) 5.02.3790 (Service Pack 1) Network Services Adapter : Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller Adapter : Network Controller Below is an excerpt from hijack this log that has me somewhat puzzled - several missing files apparently.....could this be the cause? O23 - Service: avast! Mail Scanner - Unknown owner - C:\Program Files\Alwil Software\Avast4\ashMaiSv.exe" /service (file missing) O23 - Service: avast! Web Scanner - Unknown owner - C:\Program Files\Alwil Software\Avast4\ashWebSv.exe" /service (file missing) O23 - Service: Logical Disk Manager Administrative Service (dmadmin) - Unknown owner - C:\WINDOWS\System32\dmadmin.exe (file missing) O23 - Service: Event Log (Eventlog) - Unknown owner - C:\WINDOWS\system32\services.exe (file missing) O23 - Service: Fax - Unknown owner - C:\WINDOWS\system32\fxssvc.exe (file missing) O23 - Service: HTTP SSL (HTTPFilter) - Unknown owner - C:\WINDOWS\system32\lsass.exe (file missing) O23 - Service: IIS Admin Service (IISADMIN) - Unknown owner - C:\WINDOWS\system32\inetsrv\inetinfo.exe (file missing) O23 - Service: IMAPI CD-Burning COM Service (ImapiService) - Unknown owner - C:\WINDOWS\system32\imapi.exe (file missing) O23 - Service: Distributed Transaction Coordinator (MSDTC) - Unknown owner - C:\WINDOWS\system32\msdtc.exe (file missing) O23 - Service: FTP Publishing Service (MSFtpsvc) - Unknown owner - C:\WINDOWS\system32\inetsrv\inetinfo.exe (file missing) O23 - Service: Net Logon (Netlogon) - Unknown owner - C:\WINDOWS\system32\lsass.exe (file missing) O23 - Service: NT LM Security Support Provider (NtLmSsp) - Unknown owner - C:\WINDOWS\system32\lsass.exe (file missing) O23 - Service: Plug and Play (PlugPlay) - Unknown owner - C:\WINDOWS\system32\services.exe (file missing) O23 - Service: IPSEC Services (PolicyAgent) - Unknown owner - C:\WINDOWS\system32\lsass.exe (file missing) O23 - Service: Protected Storage (ProtectedStorage) - Unknown owner - C:\WINDOWS\system32\lsass.exe (file missing) O23 - Service: Remote Desktop Help Session Manager (RDSessMgr) - Unknown owner - C:\WINDOWS\system32\sessmgr.exe (file missing) O23 - Service: Security Accounts Manager (SamSs) - Unknown owner - C:\WINDOWS\system32\lsass.exe (file missing) O23 - Service: Simple Mail Transfer Protocol (SMTP) (SMTPSVC) - Unknown owner - C:\WINDOWS\system32\inetsrv\inetinfo.exe (file missing) O23 - Service: Virtual Disk Service (vds) - Unknown owner - C:\WINDOWS\System32\vds.exe (file missing) O23 - Service: Volume Shadow Copy (VSS) - Unknown owner - C:\WINDOWS\System32\vssvc.exe (file missing) O23 - Service: WMI Performance Adapter (WmiApSrv) - Unknown owner - C:\WINDOWS\system32\wbem\wmiapsrv.exe (file missing) Any help would be greatly appreciated Tag: Standby mode Tag: 21493
  - 12
    - Getting on the net x64 I installed x64 on a New machine. Got around the driver problems for the hardware(Ithink) and would now like to go to the NET. Tried installing AOL (from a disk) using the Compatibility mode found in Accessories. The program starts to launch, but will not complete, thus denying access to the net. (I tried to load the disc without the "compat mode" but all I get is a phone number for AOL ) Anyway, I would like to get to the net on that machine If there are ANY answers for this I would appreciate it. What are you guys using for access? To possibly make things worse..I use dial up PS AOL....NO HELP Microsoft.....NO HELP PSS....HELP! -- Bob R Tag: Standby mode Tag: 21484
  - 13
    - SysWow64 File List Anybody has the SysWow64 file list that get installed by Microsoft ? Thanks Tag: Standby mode Tag: 21481
  - 14
    - 64bit win 2003 OS question Hi I need to install a new Server for our SQL 2005 Project, now we decide to run with a 64bit Machine, is there a List of differences between 32bit vs. 64bit windows 2003 Versions ? (for example I know that 64bit don't support Streaming Services) Thanks Tag: Standby mode Tag: 21480
  - 15
    - office 2003 on windows server SBE 2003 64 bit trouble with printer drivers for this 64 bit OS, managed to update our PDF printer and find some compatible win XP 64 bit printer drivers, microsoft fax printer driver works ok, but msoffice 2003 document imaging printer driver doesnt. evrything else in office 2003 works ok. Any one got any ideas how to get MS office 2003 document imaging to "print" on this OS? I can open the document imaging and use it to open document imaging files created on other machine running 32 bit, but I cant create any on this 64 bit machine, the document imaging printer doesnt appear as a "printer" Tag: Standby mode Tag: 21474
  - 16
    - Crash/Reboot with WorkLoad This seems to be the correct forum to ask: While windows in under heavy load machine will reboot or crash to desktop with no event ID. To be more discriptive here is an example that can be replicated: Windows Movie Maker (import a 750meg avi) Windows Media Player (Play a song) OR load just about any app that uses a constant stream of util% Before you suggest hardware problem: Benchmarks PCMARK2005 @6800 / 3DMARK2005 @7200 / PassMark @1100 Intel SpeedStep = Off Bios C1 = Off Running at 200X16 Setting Affinity to processor 2,3,4 still result in random crashes, along with isolating apps to its own processor. I have ideas on the cause of the problem: http://support.microsoft.com/newsgroups/newsReader.aspx?dg=microsoft.public.windows.64bit.general&mid=6e70564b-8503-44b4-9459-9ad688252a90 Furthermore, Just learned while testing to make sure that i could replicate this problem: Fan speed are set to processor #1 (if i set affinity to Proc34 and full load fans dont accelerate to compensate for temp rise) Microsoft released a fix for AutoCad multi-core systems however i cannot find the link. Thanks in Advance and any suggestions would be helpful. Tag: Standby mode Tag: 21467
  - 17
    - Suggestion on USB Wireless for Windows 2003 x64 I am trying to find a USB Wireless adapter that works with Windows 2003 x64. I have bought the D-Link Wireless 108g USB Adapter but the drivers to not install and D-Link says that they do not have the drivers available. Thanks Peace in Christ Marco Napoli http://www.ourlovingmother.org Tag: Standby mode Tag: 21466
  - 18
    - The one thing that makes me crash... ...in 64 bit, is the same thing that crashes me in 32 bit. It's playing music in the background while working in other apps. I usually have many things running, often all day without a reboot... InDesign, Photoshop, Acrobat, IE, Outlook... whatever. I can run stable all day long doing lots of photo work, distilling, network access, FTPing large files, downloading... I also like to run some music, usually using Media Player. If I do so, sooner or later I'll get a ga-ga-ga-ga-ga-ga stuttering sound and a blue screen, say when I'm printing or distilling. It doesn't happen often, but I can sense it coming sometimes. Once, maybe twice a day, if I'm using MP in the background. Otherwise I'm perfectly stable. I've had the same results in XP Pro. So what is it about media player that freaks out when I'm doing something else? It seems to happen when resources are low and memory leaking. Is there a good way to avoid this rare but annoying behavior? Does playing an MP3 put a strain on the system... is it a bug... should I be using Winamp instead? Just curious... Tag: Standby mode Tag: 21465
  - 19
    - Why I've switched to x64 After booting up in XP SP2 and clicking on my D Drive or my attached firewire drive, they would take like 12 seconds to open up. Now in x64 on the same computer, when I boot and click on those drives, they open up instantly. (It's the only factor that made me switch). Anyone know the reason for the difference? AMD4000+ GA-K8NS Ultra-939 1G Ram Tag: Standby mode Tag: 21458
  - 20
    - x64 bit install problems i recently put together a new computer from scratch (middle of august 2005) AMD 64 X2 4200+ DFI LANPARTY Ultra-D (updated bios) 1 GB OCZ Gold Edition (512x2) PC 3200 250 GB WD hard drive SATA 520W OCZ power supply ATI x850XTPE pci-e x16 DVD . . .yatta yatta with this i also got the x64 bit version of windows xp professional i formatted my hard drive NTFS and then proceeded to install x64....at the same point during the installation it would go to the BSOD....and give me a differnet driver name everytime....i tried and tried and eventually gave up and resorted to installing the 32 bit version of xp and it worked perfectly andi have been using it ever since.... but now i have decided to come back the 64 bit version and i was curious if anyone has any suggestions as to how to solve this problem so that i may go ahead and use this O.S. i really want to use the full potential of my chip..... Tag: Standby mode Tag: 21454
  - 21
    - Problem with reinstalling x64 and XP two hard disks: Help needed Hi Folks - Basically very confused right now. I have the following setup: AMD +4800 two SATA Hard drives A8N_SLI Deluxe MB I had x64 and XP installed successfully, one on each drive. Unfortunately due to something I've done, I now have only XP installed on one Hard disk. I'm trying to reinstall x64 on the second hard disk but I get the following messages when I setup using the x64 CD: 95608 MB Disk 0 at Id 0 on bus 0 on atapi [MBR] E: Partition1 [NTFS] 95612 MB < 78514 Free> 238473 MB Disk 0 at Id 0 on bus 0 atapi [MBR] C: Partition1 [New (Raw)] 238465 MB ( 238464 MB Free) Unpartitioned space 8 MB ***** I hit 'install on c: which is the 'empty' HD I want to re-install x64 on and I end up with the following: To install Windows on the partition you selected, Setup must write some startup files to the following disk: 95608 MB Disk 0 at Id on bus 0 on atapi [MBR] However, this disk does not contain a Windows-compatible partition ****** It goes on to say that it wants me to create a windows partition on this E: volume which has, of course my Windows XP Pro already installed. Not wanting to completely erase the XP Pro on E: is there any way to get around this and re-install Windows x64 on the C: drive (Volume, whatever)? or any way to successully re-install it? and keep XP Pro (and all my files) I've tried everything I can think of including altering the boot.ini, but to no avail. Is it completely necessary to start all over, reformat both drives? Any help would be greatly appreciated. Thanks - Mark M. Tag: Standby mode Tag: 21443
  - 22
    - Full screen mode option not available. Program properties, option tab, not showing option to run a dos program in full screen mode. Have Intel MB with video on board and WINXP 64. Model D945GTP. All drivers Microsoft Certified. Why is option not available. Tag: Standby mode Tag: 21441
  - 23
    - Software Support I have a software (McMillan Dictionary) that is not running in Win Xp/SP2 but I can run it in WinXp/SP1.Does Win XP 64bit support my software? If No what would I do ? Thank You -- Ebrahim Azimi Tag: Standby mode Tag: 21422
  - 24
    - Computer hangs during shutdown There is nothing in the event viewer except a dcom error at startup.. The computer is running smooth except for the fact that wen it shuts down.. It gets to the Windows is shutting down screen then it hangs untill i hit the power button to fully power it off. Any idea what could cause this? Tag: Standby mode Tag: 21412
  - 25
    - AD Domain Administration New to x64, so far so good, but a major kink has appeared. I can't install the Adminpak to administer my 2003 AD Domain. I notice that the newest version i can find is 2.5 years old, which I believe is older than x64...is there another domain administration package available from MS? If not, my computer (an HP xw4300) came with restore cds for x64 and XP Pro SP2, is the 25 digit code on my sticker only x64 or is it either/or? What are my options for downgrading to XP Pro for application compatibility? Thank you. Tag: Standby mode Tag: 21397
- Next
  - 1
    - Windows Backup Hello Windows Backup dosn't run.? Volumeschattenkopie-Erstellung: Versuch 1. Zeitüberschreitung vor Beenden der Funktion. Beim Erstellen der Volumeschattenkopie wurde ein Fehler ermittelt: 0xffffffff. Beim Erstellen der Volumeschattenkopie wurde ein Fehler ermittelt:ffffffff Die Sicherung wird abgebrochen. Greetings Roger Tag: Standby mode Tag: 21390
  - 2
    - hard drive I built my computer 4 months ago and it still take 3 times to boot up. Could it be the old hard drive that is causing the problem since it's the only thing not new? Tag: Standby mode Tag: 21385
  - 3
    - New Windows platform and 64 bit platform I hear a rumour that new forth comming platmorms will only be for the 64 bit platforms. Can anyone substantiate this or clarify??? -- Many Thanks Omar Tag: Standby mode Tag: 21384
  - 4
    - "System Idle process" uses 80% of CPU Suddenly my computer went very slow. In task manager the CPU usage is between 80% and 100%. The "System Idle Process" utilizes at least 80% of the recourses. I closed every program and everything running in the taskbar, but still no solution. After a lot of restarts, the situation continues as it is a week ago. Any ideas please.. Alex 2gb memory CPU Athlon 3000 MSI NEO4-F Tag: Standby mode Tag: 21379
  - 5
    - Win XP 64 bit setup error - did not find any hard drisk ... I am trying to install Windows XP Professional 64 bit on a PowerSpec 9200, AMD 64 Atholon X2 computer. It has two SATA drives on a Raid. With the Raid disabled or enabled I receive the same error during setup. Error during setup: Setup did not find any hard disk drives installed in your computer. Any ideas on why? Thanks Peace in Christ Marco Napoli http://www.ourlovingmother.org Tag: Standby mode Tag: 21375
  - 6
    - Entry point symbol for driver 64 bit Hello As entry point symbol for 32 bit driver is DriverEntry@8, if anybody can let me know the entry point symbol for driverentry in 64 bit because DriverEntry@8 is giving linking error "Unresolved symbol driverentry@8" regards rohit Tag: Standby mode Tag: 21374
  - 7
    - Installation of Driver Hello all I am porting 32bit driver for 64 bit Windowx XP. When I try to install my driver it show yellow mark in device manager. When I look in properties it show error code 39. If I look for error code 39 it says Reasons for this error include a driver that is not present; a binary file that is corrupt; a file I/O problem, or a driver that references an entry point in another binary file that could not be loaded. Please let me know if anybody knows what can be the problem. regards rohit Tag: Standby mode Tag: 21373
  - 8
    - Eval. period over after about a month? Hi, i got my eval copy of win xp 64 pro bout a month ago. today i installed a new OCZ ram chip and needed to reset cmos so i could boot. i forgot to reset the time ...then booted into 64 and it said "this copys time for evaluation is up" or close to that. i've reset the clock now but error still happens. any suggestions? Tag: Standby mode Tag: 21366
  - 9
    - DirectX Support on EM64T Supported OS Hi There, We have EM64T compatible machine and on that Windows XP OS installed. We are trying to run one of our application having features of Direct 3D, but it is giving an error that "d3dx9_27.dll" not found. But out application is not using any feature of this DLL neither this DLL's related library invoked in our project settings. Also we are trying to install DirectX SDK on this machine but we receive a message that .Net Framework is not installed on this machine. Will you please suggest me what to do. Regards, - Kishor Mahajan Tag: Standby mode Tag: 21361
  - 10
    - product key need to locate product key code on disk Tag: Standby mode Tag: 21357
  - 11
    - whats the difference? what is the main diffenernce in xp x64 and xp pro w/ sp2? just wondering. Tag: Standby mode Tag: 21352
  - 12
    - IE32 on x64: Clear History doesn't work Tried to do a Clear History on my IE32 on x64, but it looks like not all, or maybe not _at_ all, the history is cleared. Anybody else noticed this? jud Tag: Standby mode Tag: 21348
  - 13
    - Dual core CPU shootout... http://reviews.cnet.com/4520-10442_7-6389077-1.html?tag=lnav Tag: Standby mode Tag: 21336
  - 14
    - Rename a computer xp64 in a Domain When I try to rename a computer in a domain the following error don let me do it: "Multiple connections to a server or shared resurce by the same user, using more than one user name, are not allowed. Disconnect all previous connection to the server or chared resurce and try again." Tag: Standby mode Tag: 21335
  - 15
    - Striped volume for windows without raid hardware controller Can I install windows in a Striped volume without having a raid hardware controller? Tag: Standby mode Tag: 21331
  - 16
    - MS downloads fail - again Hi, I've had to re-install X64 because a offline defrag corrupted my installation. Now, once again, I can't download any files from Microsoft. Nothing works, not validation, not MSN Messenger, none. I can go to any other website and I have no problems, ATI, CT, Adobe etc. etc. etc. If you can recall I have this problem before with X64 and it just seemed to clear up. It's not my ADSL router, because both my wireless laptop and my other, wired, desktop has no such problems. Its rather weird... ChrisC Tag: Standby mode Tag: 21317
  - 17
    - 9 in 1 Media card reader? I have a client who went with a x64 system from my recommendation (Brave!) and so far so good. I was worried about a Laserjet driver, but the LJ 5000 GN printer they have is supported natively by x64. Whew. So now, their digicam software/driver is not compatible, and they prefer a media reader anyway. Anyone try, or know of a Half Height Internal or External USB card reader that I can stick on this machine that has x64 drivers? That way, they can read their CF/SM/MS/XD/MMS/ABC/DoReMe/FUD cards from their digicams. Thanks. Tag: Standby mode Tag: 21303
  - 18
    - X2 64-bit Power Requirements Hi, I know it sounds a little off-topic but I follow this NG a lot since my new computer will be 64-bit ! Would a good 380 watts PSU be enough for a computer (tower) with 2 HDD and a Athlon x2 3800+ ? (no more add-on cards, onboard video/sound/lan) Thanks ! Tag: Standby mode Tag: 21291
  - 19
    - Wierd bug It's very possibly related to some file system crap I had goin on earlier, but I have no file navigation toolbar or any of the menus in My Computer. (The rest of the OS is working perfectly so far.) Anyone know how I can fix that? I searched around support.microsoft.com for XP and XP x64 and didn't find anything. Tag: Standby mode Tag: 21289
  - 20
    - SQL 2005 64bits with 32 bits client application Hello, We want to add to our network a new SQL server 2005. Here are the characteristics of this new server should has: -Windows 2003 64 bits -SQL server 2005 64 bits -NET FrameWork 2.0 64 bits -The network is at 1 Gbits/s The stations are in Windows XP 32 bits. Some stations are still with Windows 2000. Framework 1.1 of NET 32 bits is also installed. A client application developed with Visual Studio 2003 with FrameWork 1.1 is installed on each station. At present, the application communicates with a SQL 2000 server installed on a Windows 2000 server. If I connect my application towards my new server, will I have modifications to make to my application or all should function normally? Hope that my question is clear Thank you -- Marc R. E-mail Dim strAddr As String =Convert.ToString(String.Format("{0}.{2}@{3}.{1}", "mxrc", "cx", "robitxille", "xrs-solutions")).Replace("x", "a") Tag: Standby mode Tag: 21288
  - 21
    - Here's a silly question... I'm aware that the 64-bit version of XP was built on top of the 2003+SP1 code base rather than XP+SP2, thus there is no service pack (yet) for XP x64 called "SP2"...or SP1 for that matter, as it's built-in... But is there a service pack for the 64-bit version of 2003 itself? Or was it also built from the (32-bit) 2003+SP1 code base? I'm looking at my MSDN subscription DVDs, and the labels dosn't exactly make it glaringly obvious...I have a 2003 DVD dating from June and another from November--the only difference, according to the label, is the addition of SP1 to the 32-bit version of 2003. But if the service pack for the 32-bit version of 2003 wasn't on the June DVD, then I'm thinking surely that this x64 image of 2003 dating from June doesn't have it either? (this is a Monday morning question...I'm easily confused right now) ;-) Tag: Standby mode Tag: 21287
  - 22
    - Can't Dual Boot XP Pro and XP x64! HELP... I installed the Windows XP Pro on my patition C, everything is all setup, then I install the Windows XP x64 on the patition D, after installation and drivers setup, I tried to boot the 32bit Windows but doesn't work...(stay on black screen and HDD keeps loading) waited around few minutes it said "ntoskrnl.exe is missing...". So I use the 32bit Windows XP CD to boot into the Repair Console and use FIXBOOT. Now I can boot the 32bit Windows XP, however... listen... the problem is this time turns to the 64bit Windows XP is unable to boot up...(stay on black screen and never say anything...) If I fixboot the 64bit Windows then I can boot into the x64 but 32bit Windows can't boot in after... How can I fix this problem? Tag: Standby mode Tag: 21270
  - 23
    - Problems installing Windows 64bit trial version on a Windows 98se Error message comes up stating that the trial version expected a newer version of Windows and that I should upgrade. Problem is I was trying out the trial software to see if I wanted to upgrade. Now what. Is there anything I can do expect trash the setup disk that I created??? -- Loosey is lost in Cali. Tag: Standby mode Tag: 21258
  - 24
    - x64 Finalizing Installation then Reboots before Finished x64 install looks like its in the last minutes of the install process and then it causes a system reboot. The reboot fails when selecting x64 and causes another reboot. Installed and repaired several times, same problem. MS dual boot, XP was installed first. Seperate partitions. Motherboard latest BIOS as well as F6 SATA drivers. Any ideas, pointers to additional help appreciated. Tag: Standby mode Tag: 21257
  - 25
    - x64 drivers for ms-optical desktop Does anyone know, where I can get some drivers, for WinXP-64 bit, for the Microsoft Wireless Optical Desktop Pro version 3.0. It has a "tilt" wheel mouse that not only scrolls up and down, but also left and right. The drivers that come for WinXP-32 bit, work fine (on WinXP). But I have a computer running WinXP-64 and there don't appear to be 64-bit drivers for it (nor do the default drivers that come bundled into the OS, have support for this package). Tag: Standby mode Tag: 21255

In the last week or so, when I start from Standby mode, the computer freezes
for a little and then reboots. Any likely reason or solution?

Top