Sentinel Dongle can't see

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Word SMart Tags? Do Smart Tags work on x64? I installed an add-on Smart Tag from a third party vendor, and it did not seem to do anything. I did some investigating, found where you turn them on in Word (they were on), but even the basics like Outlook names etc. are not being flagged. I was just wondering if they are supported in x64, thanks... Tag: Sentinel Dongle can't see Tag: 16644
  - 2
    - WinXP32-64 I just wanted to ask if I install the 64bit version what will happen with my 32bit one? Will I be able to switch between them and/or after the trial period delete the 64bit withouth damaging my old XP? Tag: Sentinel Dongle can't see Tag: 16643
  - 3
    - Is there any UAA Patch for Win2k3 64bit ? i can't install HD Audio in Win2k3 64bit Thank you ! Tag: Sentinel Dongle can't see Tag: 16642
  - 4
    - Dual Boot Hi I have installed XP64 on a second disc which is a P ata, My Xp32 is installed on a Sata II, When I boot the xp32 my sata is C, and the XP64 disc is the G To boot the XP64 I have to change the bios setting and then my P ata xp64 become the C How do I get windows to give me a choice at boot start up If I add to my XP32 ini a second line : multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP Professional x64 Edition" /noexecute=optin /fastdetect But this does not work as it gives me an error I tried changing the 'rdisk(0)' to 1 or even 2 but no luck as I suppose that it should stay on G ie for me the 2 disk can anyone help me on this please Thanks Tag: Sentinel Dongle can't see Tag: 16637
  - 5
    - Windows Server 2003 X64 RC2 or SImply XP Professional X64 Edition I built a new Xeon 64 bit system and I am planning to dual Boot it with Xp Professional 32 bit. The main use of my computer is for Music Applications such as Cakewalk Sonar 4.03 (5.0 soon to be released) and many 32 samples which I plan to run on the X64 system in wow64 Are there any benefits in installing Windows Server 2003 X64 RC2 instead of simply the XP Professional X64 Edition RC2? Any insight would be appreciated Pascal Tag: Sentinel Dongle can't see Tag: 16636
  - 6
    - WinTV (Hauppage) Under XP 64 Does anyone know if the Hauppage WinTV USB drivers and software will run under XP 64? I would/will email them but I know wont get a reply until Monday at the earliest Tag: Sentinel Dongle can't see Tag: 16603
  - 7
    - Using windows media player A machine check error has ocurred,please check the system eventlog for additional information. How can I correct this this problem ? Thanks in advance.... Carlos Tag: Sentinel Dongle can't see Tag: 16599
  - 8
    - Ethernet Adapter Compatibility Which ethernet cards, if any, work with XP 64 Pro. LinkSys does not, D-link does not, and my on-board NVidia NForce 3 LAN died unexpectedly after 1 month. Any Ethernet adapter suggestions? Thanks. All latest drivers implemented MSI K8 Neo Platinum AMD 3400 64 Tag: Sentinel Dongle can't see Tag: 16589
  - 9
    - Wow, this group has died ... this is not good Only 8 new posts for a Friday. I hope this doesn't mean that Windows XP x64 is on the way out. Wayne Tag: Sentinel Dongle can't see Tag: 16588
  - 10
    - IntelliPoint mouse software for "64bit" Anyone knwo where to get IntelliPoint good for xp pro 64bit? Thanks -- XP-Pro-64 Pentium-D-820 Asus-P5WD2-Premium Maxtor SATA DDR2-in-dual-channel Tag: Sentinel Dongle can't see Tag: 16568
  - 11
    - Kyocera x64 printer drivers FS-C5030N We got a couple of FS-C5030N printers recently, which did not have any driver support, I rang Kyocera a month ago, and they said they were coming. Anyway had a quick browse around this morning and found these x64 drivers down under: http://www.kyoceramita.com.au/cs_drivers.asp No sign of them on the Euro/US site as far as I can see..... -- Alex Griffin Tag: Sentinel Dongle can't see Tag: 16549
  - 12
    - Desktop feature missing! Please return the very useful feature of having an HTML page as the desktop background. This is a wonderful feature in XP Pro 32 bit and will be sorely missed by our company if not included in the 64 bit release!!! Tag: Sentinel Dongle can't see Tag: 16534
  - 13
    - x64 see's 233GB not 250GB. I have 4 diamondmax 250GB hard drives. I am runnung XP PRO x64, but the OS always shows the HDD's as having only 233 GB of space (obviosly less on the boot disc). Why is this? It also happens when using the onboard Nvidia RAID or x64 software RAID. Secondly how do I encourage the system to use more physical RAM rather virtual RAM. I have 8G but more virtual is being used. Is this application dependant or something that can be changed within the OS. Kindest Regards Mark Tag: Sentinel Dongle can't see Tag: 16531
  - 14
    - Does the Page File must be on C in order to check the dump files? I set my PF on another partition (which is also another harddrive),when i enable the Small memory dump and disable the auto restart,i get a message...something like "if you have PF lower than 0 on drive C,windows wont be able to write these minidumps" (something like that). My question is,does the PF really need to be on drive C:? Tag: Sentinel Dongle can't see Tag: 16519
  - 15
    - test test - posted at www.64bitstuff.com - NNTP-Module for IPB by bfarber @ www.ipbmods.net (Funded by www.MoDaCo.com) Tag: Sentinel Dongle can't see Tag: 16518
  - 16
    - xp64 install going in circles As a follow up to my previous (unanswered) query, I have this scenario going on. Since xp64 Trial did not complete install when trying to do a dual boot setup I decided to try some things. One doing reinstallation of xp64. Well, what is happening is that once setup has installed the setup files, and the message "this portion of setup has successfully installed, your computer will reboot in 15 seconds" the computer reboots, but only reverts back to installing the same setup files, rather than going on to the next stage of installation. What is causing this? The bios is set to boot from cd first. If i try to boot from hard drive first, I get the disc error message. When I do go back to setup, the setup detects the attempted install of xp64 as being "another version of windows" is installed in the windows folder etc. I believe the disc to be good, as I had installed from it once before successfully but had to redo the install in order to put xp32 on the other drive, and then reinstall xp64 on the new drive for a dual boot setup. Tag: Sentinel Dongle can't see Tag: 16516
  - 17
    - follow up to HL-DT-ST DVDRAM GSA-4120B I found out what knock out my combo drive.i INSTALLED THE KODAK EASYSHARE SOFTWARE VERSION 5.03.It corupted my dvd driver.Luckily i had set a restore point just before installing the software. I know it's a 32 bit program,but deceided to see if it would run in 64bit. It did install fine & did run fine......except it also disables my dvd. Tag: Sentinel Dongle can't see Tag: 16508
  - 18
    - It's expiring!!! OK. In half an hour my 120 days are over. Which is bad itself, but it's even wrong as I x64 retail is not yet available, and I would not like to purchase a new system just to be entitled to purchase an OEM (ell, here in Italy is not as simple as purchasing the OEM together with a screw :( ). So, is there any way to prolong the life of my system in the meanwhile, or does this mean I have no other chance than stick back to XP 32? May be the question has been already posted, but really I don't have much time to google around... sorry. Thanks. Tag: Sentinel Dongle can't see Tag: 16490
  - 19
    - 180 day? Hello, Today I recived my Windows XP Professional x64 Edition Trial CD in the mail. http://www.microsoft.com/windowsxp/64bit/evaluation/trial.mspx Says: "This trial software allows you to evaluate the product for 120 days. Register to order a CD or to download the trial software." The Cd Arrived and it says on the front and back of the CD Case that it is 180 day Trial Software. I am just curious which is correct. Is the website incorrect? Tag: Sentinel Dongle can't see Tag: 16459
  - 20
    - 32-bit IE creates funky folders on the desktop I hope somebody at MS reads this: I'm using WinXP Pro x64. For some reason, the 32-bit internet explorer keeps installing one of the active-x controls I'm currently developing in a funky-named folder on my desktop. I'll try to explain this in more detail: I'm currently making an active-x control. To test this control, I remove the currently registered control, copy the (signed) cab with the new version to the webserver and I go to the test website. IE immediately prompts me whether I want to install the control. The .INF file from the cab correctly ends up in the Downloaded Programs Folder, but for some reason the DLL ends up in a new, randomly-named folder on my desktop! In the Downloaded Programs Files folder the control is marked as Installed, but the DLL is using a relative path and is marked as Damaged. Sometimes the installation fails. In these cases the control's properties in Download Program Files folder shows the DLL again with a relative path but with strange (probably illegal) characters. This behaviour is very reproducable. Lio. Tag: Sentinel Dongle can't see Tag: 16441
  - 21
    - Creating X64 windows applications with VS 2005 RC hello, i created a simple windows application in visual studio 2005 rc, and in project properties window, i set target machine type to "MachineX64 (/MACHINE:X64)". When i try to compile and run the program, an error occurred: "fatal error LNK1112: module machine type 'X86' conflicts with target machine type 'x64'" How can i set module machine type to x64 then? Echevil Tag: Sentinel Dongle can't see Tag: 16440
  - 22
    - IIS Hello. I've installed IIS on my Win x64 box but can't seem to connect it's web site. Whenever I try to connect to my "localhost" through IE I get a "Cannot find server" error. I turned off Windows Firewall thinking that was causing problems but it's still a no-go. IIS administrator states that the web service is running and there's no errors in my event logs. What am I missing? Tag: Sentinel Dongle can't see Tag: 16439
  - 23
    - windows x64 i have just built a x64 PC and it seams to be very good for my work, Arcitect (rendering) however i also enjoy to play rainbow 6 raven shield over the net and for this i need a patch v 1.60 from the original v1.0 i have got the 1.56 patch installed but i can not get the 1.60 to work. it flashes up with the starting install wizard then vanishes. My understanding being it is the xp 64 due to other people having the same problem. any ideas?? John A O'Neill Tag: Sentinel Dongle can't see Tag: 16435
  - 24
    - Replacement for layout.dll? Is there a X64 replacement for 911 Layout Saver / layout.dll? I want to be able to save and restore Desktop icon layout. Thanks. Tag: Sentinel Dongle can't see Tag: 16421
  - 25
    - windows 64 bit edition in amd turion64 does anyone know if the amd turion 64 processor supports the windows 64 bit edition or vice-versa? Tag: Sentinel Dongle can't see Tag: 16419
- Next
  - 1
    - general problems in windows xp 64bit hello there first i must mantion that this is the very best os i met (for client computers) and yet i got some problems. 1) direct x that came with the os is ? and when i'm tring to test it - it fails 2) when i'm trying to install a game which requires a direct x 9.0c the game doesnt work 3) when i'm trying to download and install the latest directx (9.0c) from microsoft - the computer does othing it seems like it has some kind of direct x and connot install again help please cause i realy want this os for my new computer here is the spec: mb: gigabyte ga-k8n-ultra 939 (nforce4 chipset) proccessor: amd athlon 64 3500 memory: 4 * 512mb ddr kingston display card: gigabyte geforce fx6600 hd: wd 160gb sata-II os: windows xp 64bit sp1 v.1069 Tag: Sentinel Dongle can't see Tag: 16418
  - 2
    - virtual memory problem I've been noticing that when I run peer-to-peer software the memory and pagefile usage is astronomical and, while I can recover the physical memory with something like Cacheman, how can I recover pagefile usage? And is this problem application-related or OS-related? Tag: Sentinel Dongle can't see Tag: 16413
  - 3
    - New installation of XP 64 I have just installed XP 64 on a new computer I built. Intel 945GNT motherboard with 3 gHz Pentium D chip. Three 250 gb Western Digital Hard Drives set up as RAID 5. Difficult installation at best. 2gb Cruical memory. Intels BIOS update destroyed the BIOS and I had to replace the motherboard. Finally got things working. Now the splash screen comes up but the screen goes blank afterwards. This started after I places a portable USB device in one of the USB ports. Newegg refuses to swap this OS for the 32 bit one. What gives.? Is this thing ready for "prime time" yet? Tag: Sentinel Dongle can't see Tag: 16404
  - 4
    - Hack for spell-checking in OE. Hi, like most of you guys I noticed spell-checking doesn't work in Outlook Express under 64 bit. Windows XP 64 also has a 32-bit Outlook Express, but it still doesn't work because the EXE is modified to use a 64-bit dictionary (if you launch it you'll notice two msimn.exe processes, one in 32-bit and one in 64-bit). A simple workaround for this problem is to copy the MSIMN.EXE from a 32-bit Windows XP in the same directory as the 32-bit OE from Windows XP 64. You should rename the file before copying it, I called mine msimn_32.exe, else windows will restore the original file. Now you just need to execute the new (e.g. file msimn_32.exe) and OE will work with your 32-bit spell-checking software. The other stuff stays the same, i.e. you'll have access to your normal mails and address book from OE 64 bits. Regards, L. Weiss. Tag: Sentinel Dongle can't see Tag: 16397
  - 5
    - XP64 problem install for dual boot I first installed the xp32 Home on new primary IDE, which shows up as F drive in "my computer". The slave drive that I want to put xp64 Trial on shows as C drive when I am booted to the xp32. I then booted from cd (xp64 trial disc) and was shown drives C and D, choose one for this install. Here, at the blue partition screen, I chose D,which I'm figuring is the Slave drive, to install 64. I formatted it to NTFS (as I did the other drive). It goes through all the motions to install, but when it does its first auto reboot during setup, it doesn't seem to get past this and starts setup all over again. As a test, I have set the bios to boot the xp32 drive first which allows a normal bootup. However, if I set bios to boot the other drive first, nothing happens, no option for which OS I want to boot to (as I presume it never finished installing). Although, I do see files on the C drive resembling xp64 ( I can see a folder labeled "msagent64"). So, the questions are: what is not going right in installing xp64 for the dual boot scenario? and why do the drive letters show primary as F when in xp32? (D and E are cdrw and dvdR, and slave is C). Tag: Sentinel Dongle can't see Tag: 16392
  - 6
    - Xp pro 64 won't boot I'm sure a few of you out there have had this problem, I have installed xp pro 64 on my new system. I have two hitachi 7k80 SATAII running in raid 0 array, my problem is that I can get it to install and go through all the initial setup, but then when I try and boot for the first time into windows it stops at the logo display screen with the little blue blocks just running across the bar. I have the Nvidia raid drivers which came with the chipset version 6.66 drivers, the board in the machine is an asus a8n-sli (Nvidia nForce4). The rest is all fairly basic components Geil value dual channel kit 1GB, sapphire rad x600 (128MB), Athlon 64 3000+ (Venice). Has anyone got any ideas how I can round this? Thanks. Tag: Sentinel Dongle can't see Tag: 16380
  - 7
    - Wow6432Node Determining 64 "bit ness" I have written an application that determined if an OS was 64 bit version by looking for the Wow6432Node in the registry. Then I ran across a stumbling block. A windows 2000 machine had these in it. Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node] [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Emulex] [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Emulex\AutoPilot Installer] "PortRunning"="TRUE" It appears that Emulex: http://www.emulex.com/press/2005/0131-01.html must put this in there. Is there are "unspoken rule" about the Wow6432Node use. Is there a better way to determine 64 bitted ness on a remote machine (not able to use WMI either - a requirement I was given) Thanks, Rick Tag: Sentinel Dongle can't see Tag: 16364
  - 8
    - HP DL145-G2 / Opteron Hi, I'm having trouble getting Server 2003 x64 to install fully on an HP DL145-G2 which has the AMD opteron CPU's. Win2K3 installs OK, but I cannot find the driver files for the Interrupt Controllers (there are 2). HP website does not appear to have them, any ideas anyone? Thanks. Tag: Sentinel Dongle can't see Tag: 16363
  - 9
    - Can't boot to XP 64 with drives connected to Maxtor Ultra ATA 133 I am unable to boot to Windows XP 64 with drives connected to my Maxtor Ultra ATA 133 card. My XP 64 installation is on a SATA drive and boots fine when I disconnect the cables from the card, but leave the card in the system. The system also boots when I connect any two of my six IDE devices to the onboard IDE controller. During POST, the system correctly detects whichever devices are connected to the Maxtor card. Also, if I connect the DVD and CD-ROM drives to the Maxtor card, the system boots, but blue screens when I use either drive. I get an error message which reads: DRIVER_IRQL_NOT_LESS_OR_EQUAL This system has never had XP installed on it. It is a brand new system to which I have freshly installed XP 64. I really would like to get thise hardware configuration to work. Any suggestions? My hardware is as follows: Tyan S2895 system board (BIOS version 1.00.2895, date 2/21/05) 2 AMD Opteron Model 248 processors Diamond Viper X X600 Pro graphics accelerator card Maxtor Ultra ATA 133 Controller (BIOS version 2.20.0050.10 by Promise Technology) 2 WDC SATA hard drives 4 IDE hard drives (3 > 137 GB) 1 IDE DVD-ROM drive 1 IDE CD-ROM drive Maxtor's technical support wrote: It sounds like this is an operating system issue with XP 64. Did you recently upgrade to 64 or has it been working fine in any configuration until just recently? When did the problem start? We do not have any specific drivers for the ATA card other than what was supplied with the card itself. Given that POST sees all devices correctly, we can assume the hardware is fine. Do you have the same problem when running XP? Tag: Sentinel Dongle can't see Tag: 16362
  - 10
    - AMD vs Intel redoux I am fortunate enough to be able to buy and build a new single processor system for work (they pay and not me). My question is, do I go with Intel Pentium D proccessor system or go with AMD Athlon 64 X2 system? For the price it would seem I get more for the AMD system, no? I am generally running small databases, SAS stats program, and AcrGIS program along with the standard Office Apps. Thanks in advance. Tim Tag: Sentinel Dongle can't see Tag: 16354
  - 11
    - modem adsl There is no x64 drivers for my usb adsl modem. Can I use an ethernet modem ? Does't it need drivers? Have I to connect it to another ethernet network card, or can i connect it to my network switch ? Tag: Sentinel Dongle can't see Tag: 16349
  - 12
    - HL-DT-ST DVDRDM GSA-4102B Latest firmware installed new hard ware wizard found my drive,But ! could not install driver....either missing or it's corrupted. I did a fresh install & now have my drive is back. Very strange how the file got corrupted....but i'm all tic-a-t- poo now {:-)) Thanks to all who responded to my messages a cyber-beer to all of you for helping me diagnose the problem . Thank-you M.murcek,Rick,Colin,Randy,Piers James your input enabled me to figure out what was going on. Tag: Sentinel Dongle can't see Tag: 16346
  - 13
    - Proxie Settings or Firewall Client I have one XP X64 Machine in the office, We have a SBS 2003 Server with ISA 2000. The X64 machine will not pull POP mail or go to news Servers there is no firewall client for this version that I can find. is there a way to set up the proxie setting that will help with this problem. Tag: Sentinel Dongle can't see Tag: 16344
  - 14
    - Error with windows firewall Hello. I just started using winxp 64bit, and i can't add programs into windows firewall exceptions now. always getting the message: "Windows Firewall cannot add 'xxxx' to the list of exceptions. I can, however, and ports and services into exceptions. The problem emerged after i install 64bit windows, but i don't know whether it really has something to do with the new os. Echevil Tag: Sentinel Dongle can't see Tag: 16343
  - 15
    - Dell & Sony Dell Laptop Wireless I purchased a Memorex Mini TD F mini clip. I only have one function left on the 2003 Dell Laptop, which is the Defragmenter file. The defragmenter file said Fat 245 244MB 99%, I had placed 5 newsgroup threads into the mini clip. I noticed that the Defragmenter file showed the defragmenter file on the Mini Clip clean. Originally, I had purchased the Mini Clip (with great distaste and hassle) because I wanted to use it when I used my new 2005 Sony Laptop. On the new Sony the defragmenter file stated that the Sony computer brain was empty. When I tried to enable the Mini clip function manually, a 51-page Windows XP description began printing out. I then had 117 Internet function appear. Where did they come from? I purchased a 2003 Dell Laptop. The computer was specially assembled for each and every purchaser. It was customized for the individual needs. For two-and-a-half-years, my customized computer was a nightmare. It appeared to catch a virus every time I used dial-up to access the Internet. The hard drive was replaced twice. The second time was August 1, 2005. Immediately, the Dell began acting up. I came to the conclusion that the only time my Family and Friends did not receive a contaminated email was when the hard drive gave out, and I had to wait for a replacement. The Sony Laptop was purchased September 16, 2005 because I wanted a clean computer simply to e-mail my brother in Connecticut "Good Luck". If wishing brother "Good Luck" meant that my luck wouldn't be. Brother was going to for a surgery September 20, 2005. My situation was that I had two sick computers one a new Sony and the other a 2003 Dell. Brother needs the "Good Luck" not I. Ten years ago, I believe that the United States government knew that China had the computer technology that could disable a United States airplane's computerized instrument panel, causing it to tumble from the sky in a finger-snap and crash into the Earth anyplace, anytime and anywhere. Since I already own a Dell laptop and tried to purchase a clean Sony, I believe that the Chinese government discovered a way to nicely package a USA nightmare. If the shoe was on the other foot and the Chinese government suspected sabotage, every Dell and Sony pusher, seller and flawed computer government protector would be taken outside of the store to be immediately shot! I live in the USA. I remember the US people calling French fries Freedom fried. The USA Politicians have taught the people to dislike the French. The French are insulted because the USA medical people want to exchange 3 inferior Tuberculosis vaccines for the Original BCG that was discovered in France about 1908. Now the USA politicians insult every country in the world because a country's only value is the people within. If we are going to sell flawed destructive merchandise that will destroy human life living in the USA, then the saboteurs should be taken outside of the store or White House to be immediately shot for the act of sabotage! Yes, the rude Orion Best Buy acted like a saboteur when I returned the flawed Sony Laptop. A saboteur would lie, which he did. A USA saboteur would use the young to again lie, teaching the young that lies are good and that evil saboteur politicians are the right way to live. Yep, he did that! When I purchased the $50 Norton antivirus software (after I had already purchased the Trend), the manager was watching as I paid for four items. I feel that after looking at my receipts, he knew that I had purchased the 3-year protection plan, too Disk Clean Up is found under system tools. There was 244,416 K called Office-set-up-files. The figure is now down to 3888 KB, that is 240,528K less that what the frozen 244,4l6. I came to the conclusion that the Disk Clean Up function has a flawed counter. They looked important, but somehow I believe that they threw Trend Anti-virus software anti-virus detection into the recycle bin when my back was turned. I believe that the US government and congress people knew that when the "Made in China" computers entered the USA, the computers would contain a system called "Outlook Express". The unexpecting commoner would think that he/she had an antivirus system, but reality was that the Dell laptop browser caught the software that could detect the antivirus software first. Yep, the browser could and (as my did) would catch a virus or worm as quickly as it could then throw the culprit into my Dell Laptop to cause havoc. I call that sabotage. I don't know of any country that would teach its children to ignore sabotage, the destruction of the ground upon which they walk. How buzzard! The devil wouldn't want a liar in the devil's den, even a murder would admit to the How and Why of the murder. The Office Set-Up file was filled with useful sounding computer words. To me, it sounds like the US Congress speaking to the commoner. We teach our children to ignore sabotage words for it's already under our nose in full bloom. I had the list down to 12. 1. Encrypt class 104KB 3/15/05 2. JAVA connect 2528KB 9/14/04 3. JNlLoader Control 272KB 10/18/02 4. Multiline Slots 1068 7/14/05 5. Office Update 324 1/18/05 6. Office Scan Mana 556KB 3/15/05 7. Pie Chart Class 104KB 3/15/05 8. Sametime Broad 2828KB 9/14/04 9. Sametime Direct 772KB 9/14/04 10. Sametime Meeting 4044KB 9/14/04 11. Shockwave Flash 4KB 7/14/04 12. STConnectivity 40KB 8/29/02 _______ Claimed 244446 total 12644 The numbers didn't match, once a hand count was done. Any politician that kills its own people should have an accurate murders total. Yes, I believe that Congress people knew the "Made in China" browsers were flawed. They were counting the kill as the planes crashed to the ground. Yes, I believe that someone is watching over the murders to give an accurate killers account. Removed files 9F1C11-197B Unknown 4KB 7/27/04 Malicious software Installed 1404KB 8/18/05 Office Scan Manager 556KB 3/15/05 Pie chart Class 104KB 3/15/05 WUWebControlCl 176KB 5/26/05 I tried the free on-line Trend House call for a last check; I saw two programs that were under C:\programfiles\too large. The words "too large" and knew that program was a free dead. Ad-Aware is a program that I really like. It tells you personally when dead and it tells you where the dead go. The Ad-watch status - not available (system is falsely telling to update - the next update, a good system will disappear and be replace with a frozen). There were 162 Objects removed. 120 Objects quarantined. When the system becomes corrupt the objects will return to the files from which they were removed and all figures will return to 0. Three new critical objects were identified prior to crash. MRU list object recognized. Location: S-1-5-21-1056510136-386990482-1142637588-500\software\microsoft\internet explorer\ typedurls Description: List of recently entered addresses in Microsoft internet explorer. Location: S-1-5-21-1056510136-386990482-1142637588-500\software\microsoft\microsoft management console\recent file list Description: list of recent snap-ins used in the Microsoft management console MRU list object recognized! Location: S-1-5-21-1056510136-386990482-1142637588-500\software\microsoft\office\11.0\ common\open find\Microsoft office word\settings\save as\file name MRU I came to the conclusion that the severely flawed Outlook Express Dell Driver would be under "Dell Drivers". My Dell Driver list is the following: R50830 R54215 R54631 R54801 R56939 R57456 R58370 R61662 R61758 R64747 R64838 R64895 R64896 R66674 R81803 R89598 R98704 Under the word "Dell" was several interesting files: Dell Resource CD 1KB shortcut Wireless-B Notebook 1KB shortcut Wireless-B Note 1KB shortcut Daughter's name 1KB text document Then there were 8 Internet Downloads Dated 12-7-1999 My interest is in the Dell Outlook Express Driver, Which driver operates the Outlook Express? Tag: Sentinel Dongle can't see Tag: 16342
  - 16
    - Windows XP x64 incompatability issues! I recently installed x64 because that was the reason I built a 64bit system in the first place. To have the latest fastest system that I could get. Only now, do I learn that there are a number of 32bit apps and drivers that are incompatable with the x64 OS. Now if Microsoft is so hot on promoting this new OS, why cant I find the updated drivers from manufacturers such as HP for my scanner or digital camera or Pico for my DVR card. Even Nero is having difficulty running on this system and it seems to me that my machine was doing better running XP 32bit. Tag: Sentinel Dongle can't see Tag: 16337
  - 17
    - XP Pro x64 MSDN download doesn't work? I have found the MSDN version of the AMD x64 WindowsXP Pro to be practically none-functional. I tried installing both versions (the one suffixed with 'Checked/Debugged', whatever that means?, the other without this addendum) combined with the latest drivers, and other than showing the desktop, was otherwise useless. To rule out a hardware/driver deficiency, I purchased an OEM version of x64, which installed functions flawlessly. So, considering the astronomical cost of the subscription and the unbelievable amount of time that I've wasted with these worthless downloads, combined with the cost of the OEM version, what is going on here!? I've also not been able to get the Media Center OS download to even successfully install!? Thanks Tag: Sentinel Dongle can't see Tag: 16334
  - 18
    - VirtualPC on XP x64 ? Hi, I "upgraded" to Windows XP x64 edition recently. But I really miss VirtualPC. Any idea when a 64bits version will be available ? Thank you very much William Levra-Juillet MS certified partner http://www.wildup.net Tag: Sentinel Dongle can't see Tag: 16331
  - 19
    - Pinnacle Studio 9 installation on XP X64 Hello, Is there a way of faking Service Pack 1 on XP X64? This because the following problem: When I try to install Studio 9 from Pinnacle on XP X64 the software installer 'thinks' it needs Service Pack 1 and simply stop installing! Thanks in advance for any help Greetings Robert Tag: Sentinel Dongle can't see Tag: 16327
  - 20
    - Adaware for X64 Is it save to use? Ralf Tag: Sentinel Dongle can't see Tag: 16326
  - 21
    - Dual Boot with xp pro and xp64 I have just purchased a P4 D Processor 840 and a abit aw8 max motherboard with 4 gig memory and two raptor drives. I have installed xp pro on and it only sees one processor and 3 gig of memory. I reformated and installed xp64 and sure enough it found the processors and memory although it took me some time to find the drivers for the network. I need to have dual boot because some software will work on xp64 and some dont question for the day is it best to install each operating system on each drive and just unplug the drive with the operating system i dont want. Ideally i would like to dual boot having both operating systems on one drive and share the second drive for data . What would you Guys in the Know recomend . -- Barrie Hall Tag: Sentinel Dongle can't see Tag: 16325
  - 22
    - New MS Keyboard...again! ...but no x64 drivers?! :( http://www.microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=043 Hello Logitech! http://www.logitech.com/index.cfm/downloads/software/US/EN,CRID=1796,contentid=10226,OSID=11 Tag: Sentinel Dongle can't see Tag: 16324
  - 23
    - OT slightly RE Win Server academic??? An online store has an "Academic" version of this... I think it's 32-bit. I can get just about all my OS and SW, for IBM *or* Mac, "free" from school via MS contract (and discounts on systems from the same online store), but only our *departments* can get their hands on OS server editions.... So I'm wondering, is this a new offering, or is it not really legit? I guess I need to check in at school again, something I usually only do once a year for this stuff (most of which I never install or use -- except for test purposes, go figure). It costs less installed than even Linux on their server systems, which is why it caught my eye. Talking about an entire (Intel EM64T) system for under a grand, ready to go. Sheesh. Tag: Sentinel Dongle can't see Tag: 16318
  - 24
    - Intel vs AMD64 shootout... http://www.extremetech.com/article2/0,1697,1860533,00.asp Tag: Sentinel Dongle can't see Tag: 16305
  - 25
    - LG dvdram GSA-4120b This drive does not show up in My computer, but is functional burning with Nero. Why does it not show up? -- Hugh Tag: Sentinel Dongle can't see Tag: 16304

Installed SentinelPro dongle and new Sentinel software.

Same printer port supports printer fine. But Sentinel driver is "blocked".
System can't read dongle. Anyone knows how to get it loaded?

--
XP-Pro-64
Pentium-D-820
Asus-P5WD2-Premium
Maxtor SATA
DDR2-in-dual-channel

Top

Re: Sentinel Dongle can't see by Rick

Rick
Sun Sep 25 14:35:50 CDT 2005

You would need a 64-bit driver for Win x64 for the dongle.

Contact the vendor and/or the manufacturer for a 64-bit driver.

hpu wrote:
> Installed SentinelPro dongle and new Sentinel software.
>
> Same printer port supports printer fine. But Sentinel driver is "blocked".
> System can't read dongle. Anyone knows how to get it loaded?
>

Top