Nero 7 doesnt uninstall on Win x64
Well I got my first BSOD in years using Nero 7. So I figured I'd
uninstall it and load Roxio 8 for a change. I know its hard to belive
since Roxio EZ-CD was so bad for years. Anyway I digress.
When I went to uninstall Nero 7 I recieved the following message
'Error applying transform. Verify that the specified transform paths
are valid'. Obviously Nero doesnt recogonize or like the \program
files (x86)\ directory even though it installed into it. It didn't
even ask me where I wanted to load the files, it just automatically
defaulted to c:\. I eventually had to delete the Nero folder and clean
out the registry with TweakNow Reg Cleaner 2.6.0 which supposedly
supports x64. Yes I know that using a reg cleaner is a bad idea but
time is not in abundance for me right now.
Well to make a long story short Roxio 8 is up and running well on my
system. Don't know if I'll run into the same problems if I have to
uninstall it.
Just a heads up!
Regards,
Wad Tag: Nokia software Tag: 19095
Internet Explorer (32-bit) doesn't work...
Hi. I can't surf using Internet Explorer (32-bit) but the 64-bit one works
just fine. I was able to install all the drivers correctly.
I tried installing Firefox 1.07, and it's the same situation: it can't
connect.
Except for Windows Update, it seems that all apps that connect to the
internet (ie. googletalk, avast) are having problems.
Hope somebody can help.
Thanks. Tag: Nokia software Tag: 19092
Search Feature in this Community Forum
Is it my imagination or is the Search For feature not working very well.
On 10/28/2005 I posted a message entitled "TV Tuner Card" but when I search
for it I get the following:
"Your query for "TV Tuner Card" did not return results.
The following may help you find the results you were looking for:
Check your spelling.
Enter a term or phrase that's less specific.
Try different phrasing.
Try fewer words.
Just some feedback Microsoft.
Regards,
--
websledder_____________* Tag: Nokia software Tag: 19086
New NVida NForce 4 chipset x64 drivers
Nvidia (www.nvida.com) has released new drivers (v6.69)for their NForce 4
chipset.
This is the download link for the international version:
http://download.nvidia.com/Windows/nForce/standalone/6.69/nForce4_amd_6.69_winxp64_international_whql.exe
Drivers included are versions:
Audio driver version 4.62 (WHQL)
Audio utility version 4.51
Ethernet NRM driver version 4.82 (WHQL)
Network management tools version 4.85
SMBus driver version 4.5 (WHQL)
Installer version 4.93
SATA RAID driver version 5.52 (WHQL)
IDE driver version 5.52 (WHQL)
RAIDTOOL application version 5.52
For dual-booters there was also v6.70 for x86 released a few days ago.
This is the download link:
http://download.nvidia.com/Windows/nForce/standalone/6.70/nForce4_amd_6.70_winxp2k_international.exe
Enjoy.
Carlos Tag: Nokia software Tag: 19079
Blank email messages in Outlook?
I've got Outlook 2003 on an XP-64 machine. Each day, a half dozen or
so blank emails reach my inbox. That's no From, To, Subject, or
Content.
Other than that, Outlook (and the rest of Office 2003) seems to be
working fine.
Anybody else notice these strange blank emails?
Outlook doesn't seem to be able to define a rule to zap blank emails... Tag: Nokia software Tag: 19068
COM dll (32 bits) on a x64 system
Hi,
I have tried to install a COM dll (32 bits) as a service using dcomcnfg on a
64bits OS. When I started the service, I got an error (can't quite remember)
about some dll's not found. I suspect this is related to the system32 folder
and the SysWOW64 folder but I'm not sure. It might also be related to the
fact that I'm using dllhost.exe to host the COM dll and that the dllhost is
64bits while my dll is 32bits. Any ideas?
Please refer me to an appropriate document or if you have any idea please
let me know,
Thanks in advance,
Henri. Tag: Nokia software Tag: 19067
scanning for viruses in newsgoups
I'm using Outlook express to receive my newsgroups. Does outlook
automaticlly scan received msg or how do I set it up? Tag: Nokia software Tag: 19047
re-install of evaluation copy build 3790
I noticed every-time I reinstall I get a longer trial period went from dec
05 th 05 to Jan 19 th 2006.???according to winver. Tag: Nokia software Tag: 19046
64 bit Workstation suggestions.
Can anyone suggest a good choice for a preconfigured 64 bit workstation?
I checked Dell and Sun Microsystem but these machines are pretty
pricey. I want something for test environment (ok a play toy). I would
like to start on the 64 bit journey. Being that 64 bit software choices
are a bit limited at the present I want a machine that can handle 32 bit
programs properly as well. Finally, I don't want to spend a fortune on
this "test drive" machine.
Regards;
John Tag: Nokia software Tag: 19035
Windows 64 bit activation
Hi there,
Have recently (just over a month ago) bought an AMD 64 bit 3000+ with XP Pro
64 bit preloaded from a reputable site on Ebay. Not knowing anything about 64
bit assumed it was just the latest version of XP. I had problems loading
applications Blue Yonder broadband, HP Deskjet software etc.. and gave up for
a few weeks. When I bootup the pc it now asks for Windows to be activated. On
saying "yes" to this a box appears saying that it is already activated and to
"exit". When exiting the welcome screen logs off everytime. I don't know what
to do now as I cannot get the Product ID in control panel until I can login.
I have the Product key on the Recovery disk supplied. I remember that it says
on the bottom of the desktop that this is an evaluation copy. Does this mean
that I have to purchase another copy of Windows XP or is there some way to
get this version activated? Thanks for any advice Tag: Nokia software Tag: 19034
Missing DVD Drives
Hi all,
I've been using my dvd reader for months and my new DVD burner for two weeks
without a hitch....
Today both drives are gone????
What's up???
Can you help Tag: Nokia software Tag: 19031
EULA
Does Windows XP Pro 64 Bit edition provide you with downgrade rights to 32
Bit edition or even older versions of Windows (ie Win 2000 Pro or NT) Tag: Nokia software Tag: 19025
creating a DISK IMAGE of a xp64 install. ghost
read old thread about 5 times, no real answer lol. Has anyone here been able
to successfully and with little hastle create an image of their 64bit win xp
install? I am currently using the trial version of the software. Standard
install on ata HD. if so, what programs work, and what do i need to do to
create a bootable image of my xp64 install.
thanks,
Dave Tag: Nokia software Tag: 19020
A problem with BToes and the x64 driver
I have bought the BToes ver. 365 and I have a winxp x64 system. When I
connect the BToes to my computer, winxp x64 automatic chooses the drivers
(Blutonium BCM2035 Bluetooth 2.4 GHz Single chip Transceiver and Microsoft
Bluetooth Enumerator). I can say that file transfer between my computer and
my cellphone works with this.
I have downloaded the btdongle_XP64bit.zip. When I try to update the
Blutonium BCM2035 Bluetooth 2.4 GHz Single chip Transceiver I get the message
that The specified location does not contain a compatible software driver for
your device. If the location contains a driver, make sure it´s designed to
work with Windows for x64-based systems. And when I try to update the
Microsoft Bluetooth Enumerator I get the message that Installing this device
driver is not recommended because Windows cannot verify that it is compatible
with your hardware. If I choose to intall the driver I get a yellow
exclamation mark beside the MSI USB Bluetooth Device in computer management
and with the error This device cannot start. (Code 10).
Am I doing something wrong? Tag: Nokia software Tag: 19016
HP PSC 1210 drivers for x64
Does anyone know anything about drivers for HP PSC 1210 All-In-One? Any
suggestions if so please post them thanks. The HP website says that they plan
to release some later this year but nothing yet. The alert feature on HP's
site doesn't work either. Tag: Nokia software Tag: 19014
32-bit Coinstaller under X64
I am installing a 64-bit driver, but the 32-bit coinstaller does not seem to
be running properly.
Can I stil luse a 32-bit coinstaller dll or does it have to be a 64-bit dll? Tag: Nokia software Tag: 19012
WIA on X64
Hi,
On X32 I have a complete working WIA set of user mode .dll/.exe and kernel
mode driver for a video capture board.
On X64, I have a working X64 Kernel mode driver, and I have the same 32-bit
user mode WIA components (.dll/.exe).
I install using an X64 INF file under X64 and the kernel mode driver
captures video, but WIA is not working. For example, my device is not listed
under Scanners and Cameras.
I thought I did not need to rewrite the user mode stuff for WIA since there
is a WIAWOW64.dll that takes care of all the 32/64 bit transitions.
Does anyone know what I need to do to make WIA work under X64? Tag: Nokia software Tag: 19011
Registry help
Howdy folks
I need to clean my registry file and would like to know what works with X64?
Tell me what you use and with what results.
Thank you. Tag: Nokia software Tag: 19008
Optical Drivers for XP Pro x64
I evidently replaced my optical drivers when I loaded some software. All the
software help desks seem to say "We don't know if it works with 64 bit, Try
it." I have been searching for the drivers for my Sony CRX230EE & DW-D26A.
Sony advised get them from the Microsoft site. They are probably on my XP Pro
X64 CD but the CD drive is not recognized. Any ideas?
Thanks
Larry Tag: Nokia software Tag: 18999
Dialogue during MUI installation
In a dialogue while installing MUI, I added "Japanese" for "Install
languages for menus and dialogs" and left a default entry of "English"
for "Default user settings".
The last question in the dialogue was wheather to put a check mark or
not on "Match the language for non-Unicode programs with the default
user language". I did not understand what the question means so I did
not put a check mark.
Could anyone shed light on the above? What would be consequence for my
not putting a check mark there?
Kaz Tag: Nokia software Tag: 18998
x64 - WriteFile() - Insufficient system resources exist to complete
I am not sure if this is the right place for this question or not. If not,
kindly direct me to the proper group.
I am having a problem with WriteFile() returning an error. I have whittled
this problem down to a short test program in C which fails under WinXP x64,
but works fine on WinXP x86. I see the problem whether I compile for a win32
or a win64 target. The quick summary is that if I use a size of 33525760 I
can use WriteFile() (after a CreateFile() with the FILE_FLAG_NO_BUFFERING
flag) just fine. If, however I use a file size of 33526272 or larger, then I get:
Insufficient system resources exist to complete the requested service.
I am running on a Dell Precision Workstation 670 w/ dual Xeon processors,
2GB RAM and using WinXP x64 SP1.
I have tried increasing the pagefile.sys size since someone suggested that,
but it did not help.
Here's the sample code:
--- CUT HERE - start of cf-test.cpp ---
#include <stdio.h>
#include <io.h>
#include <fcntl.h>
#include <Windows.h>
// Forward Declaration
void PrintError (void);
int main(int argc, char *argv[])
{
HANDLE hHandle = NULL;
char caFilename[512];
bool bRet = false;
unsigned char *ucpData = NULL;
// This size will work
// long lChunkSizeBytes = 33525760;
// This size will NOT work
long lChunkSizeBytes = 33526272;
unsigned long ulNumBytesWritten = 0;
printf("argc = %d\n", argc);
if (argc > 1)
sscanf(argv[1], "%ld", &lChunkSizeBytes);
strcpy(caFilename, "test.dat");
// Allocate Memory
printf("Allocating memory (%ld bytes)...\n", lChunkSizeBytes);
ucpData = (unsigned char *) VirtualAlloc(NULL,
lChunkSizeBytes,
MEM_COMMIT,
PAGE_READWRITE);
printf("done.\n");
// Open File
printf("Opening file '%s'...\n", caFilename);
hHandle = CreateFile(caFilename,
GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL,
OPEN_ALWAYS,
FILE_FLAG_NO_BUFFERING,
NULL);
if (hHandle == INVALID_HANDLE_VALUE)
{
fprintf(stderr, "Error Opening File\n");
PrintError();
//MemoryFree(&hMem, &ucpData);
exit(-1);
}
printf("done, handle = 0x%x.\n", hHandle);
// Write File
printf("Writing file...\n");
if (!WriteFile(hHandle, ucpData, lChunkSizeBytes, &ulNumBytesWritten,
NULL))
{
fprintf(stderr, "Error Writing File\n");
PrintError();
//MemoryFree(&hMem, &ucpData);
exit(-1);
}
printf("done.\n");
// Close File
printf("Closing file...\n");
if (!CloseHandle(hHandle))
{
fprintf(stderr, "Error Closing File\n");
PrintError();
//MemoryFree(&hMem, &ucpData);
exit(-1);
}
printf("done.\n");
// Free Memory
printf("Releasing Memory...\n");
if (!VirtualFree(ucpData, 0, MEM_RELEASE))
{
fprintf(stderr, "Error Freeing Memory\n");
PrintError();
//MemoryFree(&hMem, &ucpData);
exit(-1);
}
printf("done.\n");
}
void PrintError (void)
{
LPVOID lpMsgBuf;
FormatMessage(
FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM,
NULL,
GetLastError(),
MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT), // Default language
(LPTSTR) &lpMsgBuf,
0,
NULL
);
// Display the error number & string
fprintf(stderr, " GetLastError(0x%x) = %s\n", GetLastError(),
(LPCTSTR) lpMsgBuf);
// Free the buffer.
LocalFree(lpMsgBuf);
return;
}
--- CUT HERE - end of cf-test.cpp ---
Compilation for x64 is done with the Platform SDK for Windows Server 2003 SP1
and selecting the Build Environment for XP x64 Retail. Then "cl cf-test.cpp
bufferoverflowU.lib". Thanks very much for any assistance.
-Michael Russell
russell@mathtech.com Tag: Nokia software Tag: 18989
64 bit Atheros wifi reference drivers
http://america.giga-byte.com/Communication...lan42052bin.zip seems to
have the Atheros reference drivers. Should work with D-Link, Netgear
wireless cards under XP x64.
Use at your own risk, if something explodes, it is your problem not
mine <G>.
--
Barb Bowman
MS Windows-MVP
Expert Zone Columnist
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/ Tag: Nokia software Tag: 18971
Is x64 stable enough?
Hi,
Is XP Pro 64-bit stable enough to be the only
operating system on my next machine ?
Should I keep a XP Pro 32-bit in dual boot just
in case some programs don't work.
I'm a programmer and I'm mainly using developper
tools (VC++) on my machine... Maybe NHL 2006
also ;)
My new processor will be an Athlon 64 X2
Thank you Tag: Nokia software Tag: 18969
dvd formating & writing in win 64
what software, what dvd burner is available for win xp 64 for formating &
writing dvd's Tag: Nokia software Tag: 18968
Novell Netware
How can I access files which are in a Novell Server? I cannot install CSNW in
64bit XP, or even download the Novell Client for Windows, it doesn't work.
In the General Tab of Local Area Connection, when I click the Install
button, no matter add the "Client" or "Service", it prompts that :
"Windows are unable to find any drivers for this device"
And ask me to locate the "inf" file. I dunno what to do!
But for XP, there is no such problem. CSNW can easily be installed.
Apart from CSNW, is there any other new way to connect to Novell Server?
Dear Experts, pls help. I have 5 new computers having the same situation in
the company. Tag: Nokia software Tag: 18965
BFG 7800 GTX graphics problems.
Please help!!!! I've got a BFG 7800 GTX I'm tyring to get working but none of
the drivers I have installed seem to work properly; I've tried nVidia's and
BFG's websites and several different versions of the supposed x64 compatible
driver but no luck. All games have black glitches flashing up on the screen
here and there; sparks and flashes, especially AOEIII, and Black & White 2
crashed during the intro movie. Anyone else out there got this card and got
it working properly? Tag: Nokia software Tag: 18946
OpenAL and x64
I've just installed quake 4 which runs fine except for the sound, it does
work but sounds distorted and crappy. The game reports that my sound card
doesnt support openAL and I cant enable EAX.
Ive got realtek onboard sound (abit av8 3rd eye) and under xp32 all was good
with it. The realtek site has drivers for x64 which I do have installed
(WDM_A378.exe), so is there anything I can do to get it working?
Thanks
Steve Tag: Nokia software Tag: 18943
Software Speed Inconsistancies with Windows Professional XP x64
I have been having lots of weird software problems with my 32-bit programs.
Most noteably are the games where the software will run normally for 5-10
seconds and then speed up as if the game is running twice as fast as it
normally should, it will do this for 5-10 seconds and then go back to normal
and repeat.
The videogames I have noticed this on so far are
-Grand Theft Auto: San Andreas
-Star Wars: Jedi Knight II
-Star Wars: Knights of the Old Republic
I also notice the same problem in flash apps that run in my Firefox browser.
The animation will speed up and slow down. Obviously I haven't had extensive
testing with where this orginating from or why it is doing this but believe
me I have made sure that there aren't any other programs running while I use
these programs (unless there is something running that I am not seeing). The
funny thing is sometimes the software will run just fine and then I will hit
a loading transition in a game it will go out of whack; restarting my
computer fixes the problem usually. The system I am running this on was
purchased in June of this year with 1 gig of RAM, an AMD 64bit Dual Core
Processor +4600, and a new ATI graphics card. Could this have something to do
with AMD's dual processor set-up in their chip? Any info on this weird
problem would be much appreciated, thanks. Tag: Nokia software Tag: 18941
x64 detection
I had been using the existence of the registry key:
HKLM\SOFTWARE\WOW6432Node
to determine if a remote system is an x64 os. It seems a couple of
applications now create that key if it does not exist on non-x64 systems (at
least Emulex and Broadcom software has done so). I am looking for a more
accurate way (non-WMI) to do this. I have noticed a registry key existed on
a x64 system:
HKEY_LOCAL_MACHINE\HARDWARE\RESOURCEMAP\Hardware Abstraction Layer\ACPI x64
platform
On a non-x64 system I have:
HKEY_LOCAL_MACHINE\HARDWARE\RESOURCEMAP\Hardware Abstraction Layer\ACPI
1.0 - APIC platform MP
These are only two cases and I don't know how many others exist. Would it
be safe to assume that if the wow6432Node exists AND the key under Hardware
Abstraction Layer has "x64" in its name that I could be confident in
assuming the machine is an x64 system? If not, is there a (non-WMI) way
that I should use to identify a remote machine as x64. I do not know of a
WMI way either but the requirement I have is that WMI not be required to be
running on the remote machine.
Thanks Tag: Nokia software Tag: 18931
Internet security
Im having a problem with my internet security settings .When i select the
default setting then go to a website that requires a log in e.g email,this
newsgroup a box appears saying ,when you send info to the internet.it might
be possible for others to see infomation.do you want to continue.when i say
yes it changes my internet security settings to custom this has only just
started about 2 months ago Tag: Nokia software Tag: 18916
Invalid page fault in module RPCRT4.dll
Dear all,
I'm using Windows 98.
I have the following error message :
MSACCESS caused an invalid page fault in
module RPCRT4.DLL at 0187:7fbd0894.
Registers:
EAX=0063350b CS=0187 EIP=7fbd0894 EFLGS=00010216
EBX=0062f3d0 SS=018f ESP=0062f1f0 EBP=0062f3e0
ECX=7713ee58 DS=018f ESI=00000484 FS=4e8f
EDX=bff76855 ES=018f EDI=7713ef6e GS=0000
Bytes at CS:EIP:
ff 30 ff 75 d4 8d 85 1c fe ff ff 50 e8 cb 0b 00
Stack dump:
0062f714 00000000 00000000 0062f338 bff7a3a0 00000000 00000000 000ebf94
00000000 0040000c 00400000 00000001 00000000 00000000 8c7e07e0 00000000
Another error message :
MSMSGS caused an invalid page fault in
module RPCRT4.DLL at 0187:7fbd0894.
Registers:
EAX=006a31a7 CS=0187 EIP=7fbd0894 EFLGS=00010216
EBX=0069f06c SS=018f ESP=0069ee8c EBP=0069f07c
ECX=7713ee58 DS=018f ESI=00000484 FS=190f
EDX=bff76855 ES=018f EDI=7713ef6e GS=0000
Bytes at CS:EIP:
ff 30 ff 75 d4 8d 85 1c fe ff ff 50 e8 cb 0b 00
Stack dump:
0069f494 00000000 00000000 0069efd4 03973137 00000000 00000000 00000008
00000000 039730fc 00000008 00000001 00000000 00000000 9f260000 00000000
The error happens if I open every MDB file using Access 97.
The error also happens when I try to close MSN Messenger.
Besides that, in IE, the new window doesn't give result if I right click the
hyperlink.(open in a new window).
Another error also happens if I click Find menu (CTRL+F) from Internet
Explorer 6.0:
Error: 35
Incompatible version of the RPC stub.
I find this error has relation with Microsoft Outlook or Outlook Express
program. If Outlook program is not running, the invalid page fault error
doesn't happen.
I also have updated schannell.dll
(http://support.microsoft.com/default.aspx?scid=kb;en-us;315209) but the
error still occurs.
Please help me on this RPCRT4.DLL error.
Thanks.
Regards,
Vensia Tag: Nokia software Tag: 18915
Invalid page fault in module RPCRT4.dll
Dear all,
I'm using Windows 98.
I have the following error message :
MSACCESS caused an invalid page fault in
module RPCRT4.DLL at 0187:7fbd0894.
Registers:
EAX=0063350b CS=0187 EIP=7fbd0894 EFLGS=00010216
EBX=0062f3d0 SS=018f ESP=0062f1f0 EBP=0062f3e0
ECX=7713ee58 DS=018f ESI=00000484 FS=4e8f
EDX=bff76855 ES=018f EDI=7713ef6e GS=0000
Bytes at CS:EIP:
ff 30 ff 75 d4 8d 85 1c fe ff ff 50 e8 cb 0b 00
Stack dump:
0062f714 00000000 00000000 0062f338 bff7a3a0 00000000 00000000 000ebf94
00000000 0040000c 00400000 00000001 00000000 00000000 8c7e07e0 00000000
Another error message :
MSMSGS caused an invalid page fault in
module RPCRT4.DLL at 0187:7fbd0894.
Registers:
EAX=006a31a7 CS=0187 EIP=7fbd0894 EFLGS=00010216
EBX=0069f06c SS=018f ESP=0069ee8c EBP=0069f07c
ECX=7713ee58 DS=018f ESI=00000484 FS=190f
EDX=bff76855 ES=018f EDI=7713ef6e GS=0000
Bytes at CS:EIP:
ff 30 ff 75 d4 8d 85 1c fe ff ff 50 e8 cb 0b 00
Stack dump:
0069f494 00000000 00000000 0069efd4 03973137 00000000 00000000 00000008
00000000 039730fc 00000008 00000001 00000000 00000000 9f260000 00000000
The error happens if I open every MDB file using Access 97.
The error also happens when I try to close MSN Messenger.
Besides that, in IE, the new window doesn't give result if I right click the
hyperlink.(open in a new window).
Another error also happens if I click Find menu (CTRL+F) from Internet
Explorer 6.0:
Error: 35
Incompatible version of the RPC stub.
I find this error has relation with Microsoft Outlook or Outlook Express
program. If Outlook program is not running, the invalid page fault error
doesn't happen.
I also have updated schannell.dll
(http://support.microsoft.com/default.aspx?scid=kb;en-us;315209) but the
error still occurs.
Please help me on this RPCRT4.DLL error.
Thanks.
Regards,
Vensia Tag: Nokia software Tag: 18914
Boot.ini command switches for x64
Could someone list the available switches for boot.ini?
There doesn't appear to be any references to x64 specifically, all links
relate to 32-bit Windows installations.
For example, do such switches as /PAE /3GB etc still perform the same
function as they would in their 32-bit counterparts?
Thanks. Tag: Nokia software Tag: 18902
Go from Eval version to full version
Hello there
I downloaded the eval version of XP 64 pro and now my work boght me an MSDN
subscription where I can install XP pro 64 on my computer. how do I get rid
of the eval without reinstalling ?
Please help!
I do not want to reintall the whole damn thing Tag: Nokia software Tag: 18896
Intel em64T with xp64 ?
hello there
I have an intel p4 em64t processor board and I successfully installed xp64
pro. but when I go to computer properties it shows as p4 !?
is it normal ?
I am also wondering if xp64 bit can install on 32 and work as 32 ? just
incase my MB doesn't really think it's a 64 ? Tag: Nokia software Tag: 18893
EM64T xp64 question ?
hello there
I have an intel p4 em64t processor board and I successfully installed xp64
pro. but when I go to computer properties it shows as p4 !?
is it normal ?
I am also wondering if xp64 bit can install on 32 and work as 32 ? just
incase my MB doesn't really think it's a 64 ? Tag: Nokia software Tag: 18891
Pocket PC active sync issue
Anyone have a pocket PC that they use with their 64?
I have been having issues with active sync 3.8. I can sync, but can't use
the explore option. Making it hard to access files on my CF and SD cards.
If anyone has found a fix for this, I'd appreciate it.
My pocket pc is a Dell AXIM X50v and it sync's fine on my laptop w/ XP Home.
USB connection on both.
* also, my old ASUS pocket pc has the same issue.
I've checked my firewall settings and they should allow active sync file
sharing. Tag: Nokia software Tag: 18885
Windows "Monad" Shell Beta 2 for x64 released
This for the .NET Framework 2.0 RC/RTM
Overview
Windows "Monad" Shell is a new interactive command-line and task-based
scripting technology in Windows that enables administrators to more
efficiently and securely automate and control system management tasks on
both desktops and servers. "Monad" Shell provides powerful task-based
control (via built-in command line tools and utilities) and a powerful
scripting language that enables comprehensive scripted control of the
Windows operating system and applications.
Download Monad BETA 2 for x64 here:
http://www.microsoft.com/downloads/details.aspx?FamilyID=ec1d82d9-0aff-451a-88b4-41db70e04f19&DisplayLang=en
.Net Framework 2.0 RTM for x64 here:
http://www.microsoft.com/downloads/details.aspx?familyid=B44A0000-ACF8-4FA1-AFFB-40E78D788B00&displaylang=en
--
Andre
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm Tag: Nokia software Tag: 18882
Background & Network printing problems
This is a multi-part message in MIME format.
------=_NextPart_000_0072_01C5DD55.C62B91F0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I have just installed x64 on a new computer build and have a few small=20
problems. First off I am unable to select any wallpaper except what is=20
installed as default. When I locate any .jpg picture there is no option =
to=20
set as desktop background as any option.=20
The second problem is that my HP laserjet 5 is connected on a Server =
2000=20
box which does not have a x64 driver installed. Since there are no =
drivers=20
available how does one force the computer to use the local driver on the =
x64=20
box & not the server?=20
--=20
DONALD RICETTI
------=_NextPart_000_0072_01C5DD55.C62B91F0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2600.0" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2><!--StartFragment --><FONT =
size=3D3><FONT=20
face=3D"Times New Roman"> <TD =
width=3D"10"></TD><TD></FONT></FONT><FONT=20
face=3D"Verdana, Arial, Helvetica" size=3D2>I have just installed x64 on =
a new=20
computer build and have a few small <BR>problems. First off I am unable =
to=20
select any wallpaper except what is <BR>installed as default. When I =
locate any=20
.jpg picture there is no option to <BR>set as desktop background as any =
option.=20
<BR>The second problem is that my HP laserjet 5 is connected on a Server =
2000=20
<BR>box which does not have a x64 driver installed. Since there are no =
drivers=20
<BR>available how does one force the computer to use the local driver on =
the x64=20
<BR>box & not the server?</FONT></TD><FONT face=3D"Times New Roman" =
size=3D3>=20
</FONT></FONT></DIV>
<DIV><FONT face=3DArial size=3D2><BR>-- <BR>DONALD=20
RICETTI</FONT></DIV></BODY></HTML>
------=_NextPart_000_0072_01C5DD55.C62B91F0-- Tag: Nokia software Tag: 18879
Changing Ports for Remote Desktop
This post is not specific to Windows XP 64 bit ...
but both machines involved are running this os.
Please read on.
1. At work, I have a Windows box which I am
trying to acces remotely. For a complicated
set of reasons, the only port I can use is 1025.
2. I know how to edit the registry to change
from the standard port (3389) to another port,
and I know how to use a Remote Desktop client
to access a machine which has been configured
to use another port.
3. BUT, Windows apparently reserves port 1025
for another process and won't allow it to be used
for Remote Desktop.
4. So can anybody tell me which process uses port
1025 and whether it is possible to edit the registry
twice, once to switch the second process to use another
port and then again to switch Remote Desktop
to port 1025.
Thanks for any help you can offer.
Tom Trotter Tag: Nokia software Tag: 18878
XP64 OEM Update Error(s)
Is there an actual XP64 update site within microsoft? I have installed WIN XP
PRO X64 Edition [version 5.2 (build 3790.srv03_sp1_rtm.050324-1447: service
pack 1)] and have been attempting to access the update site. All I'm getting
so far is error codes - searching for which in usoft website gives nothing.
Most common error code is 0x8009200D and other is 0x8009310B. Tag: Nokia software Tag: 18859
Installing AOL on 64bit Edition
Hi there!
Just wondering if there is a compatibility issue between the Windows 64bit
Edition and AOL? I cannot install AOL Software on that platform. I keep
getting error message about missing or corrupted files.
Is there any patches on this issue or Microsoft is already have a patch on
this one?
Thanks in advance! Keep safe! Tag: Nokia software Tag: 18847
uphclean by Robin carron
seems to work fine in 64 bit
uphclean.exe (-users profile hive cleanup services). Available from
microsoft, link in their download notification news-letter. Just loaded it
in 64 bit. Loaded it last night in 32 & it seems to have made my system
faster...waiting to see if any changes or improvements in 64 bit. Tag: Nokia software Tag: 18845
audio/graphics drivers
where do I find drivers for my hardware. everyone says to go to planetAMD but
there's really not much there in the way of choices. my display isn't coming
in properly, and i've got no audio. can anyone help>?
thanks
Jon Tag: Nokia software Tag: 18842
Upgrading Server 200 and Setup cannot find the Hard Disk?
Hello there
I'm attempting to upgrade my Server 2000 to Server2003x64 - without any luck
and would appreciate your advice.
I've booted the CD and pressed F6 to load drivers from floppy.
After selecting the latest x64 drivers from Silicon Image I proceed to the
install Windows screen.
I select Install Windows and the next screen inform that the Hard disk is
not found and I can only press F3 to exit.
here is the spec:
mb: gigabyte ga-k8n Pro(nforce3 chipset)
processor: amd athlon 64 3400
memory: 2 * 1gb TwinX Corsair
hd: wd 160gb sata-II
os: windows 2000 sp4 Tag: Nokia software Tag: 18831
TV Tuner Card
Can anyone please recommend a TV Tuner card that has drivers compatible with
win 64?
Thx
--
websledder_____________* Tag: Nokia software Tag: 18828
.64 doesn't recognise Nokia Suite either. I can't find a driver on the Nokia
site. Any suggestions ?