9 in 1 Media card reader?

I have a client who went with a x64 system from my recommendation (Brave!)
and so far so good. I was worried about a Laserjet driver, but the LJ 5000
GN printer they have is supported natively by x64. Whew.

So now, their digicam software/driver is not compatible, and they prefer a
media reader anyway.

Anyone try, or know of a Half Height Internal or External USB card reader
that I can stick on this machine that has x64 drivers?
That way, they can read their CF/SM/MS/XD/MMS/ABC/DoReMe/FUD cards from
their digicams.

Thanks.

Dominic
Mon Nov 28 12:17:28 CST 2005

You don't need drivers for a USB card reader, internal or external.
x64 has the drivers needed.


"wewa" <nomail@wewa.no> wrote in message
news:ebg0INE9FHA.1188@TK2MSFTNGP12.phx.gbl...
>I have a client who went with a x64 system from my recommendation (Brave!)
>and so far so good. I was worried about a Laserjet driver, but the LJ 5000
>GN printer they have is supported natively by x64. Whew.
>
> So now, their digicam software/driver is not compatible, and they prefer a
> media reader anyway.
>
> Anyone try, or know of a Half Height Internal or External USB card reader
> that I can stick on this machine that has x64 drivers?
> That way, they can read their CF/SM/MS/XD/MMS/ABC/DoReMe/FUD cards from
> their digicams.
>
> Thanks.
>

restperiod
Mon Nov 28 14:35:26 CST 2005






"wewa" <nomail@wewa.no> wrote in message
news:ebg0INE9FHA.1188@TK2MSFTNGP12.phx.gbl...
>I have a client who went with a x64 system from my recommendation (Brave!)
>and so far so good. I was worried about a Laserjet driver, but the LJ 5000
>GN printer they have is supported natively by x64. Whew.
>
> So now, their digicam software/driver is not compatible, and they prefer a
> media reader anyway.
>
> Anyone try, or know of a Half Height Internal or External USB card reader
> that I can stick on this machine that has x64 drivers?
> That way, they can read their CF/SM/MS/XD/MMS/ABC/DoReMe/FUD cards from
> their digicams.
>
> Thanks.
>

restperiod
Mon Nov 28 14:38:41 CST 2005






"restperiod" <not@real> wrote in message
news:u$n5gtF9FHA.1140@tk2msftngp13.phx.gbl...
>
>
>
>
>
> "wewa" <nomail@wewa.no> wrote in message
> news:ebg0INE9FHA.1188@TK2MSFTNGP12.phx.gbl...
>>I have a client who went with a x64 system from my recommendation (Brave!)
>>and so far so good. I was worried about a Laserjet driver, but the LJ 5000
>>GN printer they have is supported natively by x64. Whew.
>>
>> So now, their digicam software/driver is not compatible, and they prefer
>> a media reader anyway.
>>
>> Anyone try, or know of a Half Height Internal or External USB card reader
>> that I can stick on this machine that has x64 drivers?
>> That way, they can read their CF/SM/MS/XD/MMS/ABC/DoReMe/FUD cards from
>> their digicams.
>>
>> Thanks.
>>
>
>

Andre
Mon Nov 28 14:44:38 CST 2005

Interesting post, I agree.
--
Andre
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm

"restperiod" <not@real> wrote in message
news:OOG75vF9FHA.3520@TK2MSFTNGP10.phx.gbl...
>
>
>
>
>
> "restperiod" <not@real> wrote in message
> news:u$n5gtF9FHA.1140@tk2msftngp13.phx.gbl...
>>
>>
>>
>>
>>
>> "wewa" <nomail@wewa.no> wrote in message
>> news:ebg0INE9FHA.1188@TK2MSFTNGP12.phx.gbl...
>>>I have a client who went with a x64 system from my recommendation
>>>(Brave!) and so far so good. I was worried about a Laserjet driver, but
>>>the LJ 5000 GN printer they have is supported natively by x64. Whew.
>>>
>>> So now, their digicam software/driver is not compatible, and they prefer
>>> a media reader anyway.
>>>
>>> Anyone try, or know of a Half Height Internal or External USB card
>>> reader that I can stick on this machine that has x64 drivers?
>>> That way, they can read their CF/SM/MS/XD/MMS/ABC/DoReMe/FUD cards from
>>> their digicams.
>>>
>>> Thanks.
>>>
>>
>>
>
>

restperiod
Mon Nov 28 14:46:12 CST 2005





"restperiod" <not@real> wrote in message
news:OOG75vF9FHA.3520@TK2MSFTNGP10.phx.gbl...
>
>
>
>
>
> "restperiod" <not@real> wrote in message
> news:u$n5gtF9FHA.1140@tk2msftngp13.phx.gbl...
>>
>>
>>
>>
>>
>> "wewa" <nomail@wewa.no> wrote in message
>> news:ebg0INE9FHA.1188@TK2MSFTNGP12.phx.gbl...
>>>I have a client who went with a x64 system from my recommendation
>>>(Brave!) and so far so good. I was worried about a Laserjet driver, but
>>>the LJ 5000 GN printer they have is supported natively by x64. Whew.
>>>
>>> So now, their digicam software/driver is not compatible, and they prefer
>>> a media reader anyway.
>>>
>>> Anyone try, or know of a Half Height Internal or External USB card
>>> reader that I can stick on this machine that has x64 drivers?
>>> That way, they can read their CF/SM/MS/XD/MMS/ABC/DoReMe/FUD cards from
>>> their digicams.
>>>
>>> Thanks.
>>>
>>
>>
>
>

John
Mon Nov 28 14:55:04 CST 2005

He is resting. Don't awaken him ;-)
"Andre Da Costa [Extended64]" <andred25@hotmail.com> wrote in message
news:%23Z0BOyF9FHA.1020@TK2MSFTNGP15.phx.gbl...
> Interesting post, I agree.
> --
> Andre
> Extended64 | http://www.extended64.com
> Blog | http://www.extended64.com/blogs/andre
> http://spaces.msn.com/members/adacosta
> FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm
>
> "restperiod" <not@real> wrote in message
> news:OOG75vF9FHA.3520@TK2MSFTNGP10.phx.gbl...
>>
>>
>>
>>
>>
>> "restperiod" <not@real> wrote in message
>> news:u$n5gtF9FHA.1140@tk2msftngp13.phx.gbl...
>>>
>>>
>>>
>>>
>>>
>>> "wewa" <nomail@wewa.no> wrote in message
>>> news:ebg0INE9FHA.1188@TK2MSFTNGP12.phx.gbl...
>>>>I have a client who went with a x64 system from my recommendation
>>>>(Brave!) and so far so good. I was worried about a Laserjet driver, but
>>>>the LJ 5000 GN printer they have is supported natively by x64. Whew.
>>>>
>>>> So now, their digicam software/driver is not compatible, and they
>>>> prefer a media reader anyway.
>>>>
>>>> Anyone try, or know of a Half Height Internal or External USB card
>>>> reader that I can stick on this machine that has x64 drivers?
>>>> That way, they can read their CF/SM/MS/XD/MMS/ABC/DoReMe/FUD cards from
>>>> their digicams.
>>>>
>>>> Thanks.
>>>>
>>>
>>>
>>
>>
>
>

Andre
Mon Nov 28 15:03:08 CST 2005

Uh-oh!
--
Andre
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta
FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm

"John Barnes" <jbfoofy@email.net> wrote in message
news:%23dJRD4F9FHA.3876@TK2MSFTNGP09.phx.gbl...
> He is resting. Don't awaken him ;-)
> "Andre Da Costa [Extended64]" <andred25@hotmail.com> wrote in message
> news:%23Z0BOyF9FHA.1020@TK2MSFTNGP15.phx.gbl...
>> Interesting post, I agree.
>> --
>> Andre
>> Extended64 | http://www.extended64.com
>> Blog | http://www.extended64.com/blogs/andre
>> http://spaces.msn.com/members/adacosta
>> FAQ for MS AntiSpy http://www.geocities.com/marfer_mvp/FAQ_MSantispy.htm
>>
>> "restperiod" <not@real> wrote in message
>> news:OOG75vF9FHA.3520@TK2MSFTNGP10.phx.gbl...
>>>
>>>
>>>
>>>
>>>
>>> "restperiod" <not@real> wrote in message
>>> news:u$n5gtF9FHA.1140@tk2msftngp13.phx.gbl...
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> "wewa" <nomail@wewa.no> wrote in message
>>>> news:ebg0INE9FHA.1188@TK2MSFTNGP12.phx.gbl...
>>>>>I have a client who went with a x64 system from my recommendation
>>>>>(Brave!) and so far so good. I was worried about a Laserjet driver, but
>>>>>the LJ 5000 GN printer they have is supported natively by x64. Whew.
>>>>>
>>>>> So now, their digicam software/driver is not compatible, and they
>>>>> prefer a media reader anyway.
>>>>>
>>>>> Anyone try, or know of a Half Height Internal or External USB card
>>>>> reader that I can stick on this machine that has x64 drivers?
>>>>> That way, they can read their CF/SM/MS/XD/MMS/ABC/DoReMe/FUD cards
>>>>> from their digicams.
>>>>>
>>>>> Thanks.
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

wewa
Mon Nov 28 14:49:58 CST 2005

Hmm,

Could've sworn i needed drivers for some of them back in the Win32 days...
:)

I will give it a shot naked!

Thanks!


"Dominic Payer" <dominic@dcpayer.freeserve.co.uk> wrote in message
news:egz1$fE9FHA.1028@TK2MSFTNGP11.phx.gbl...
> You don't need drivers for a USB card reader, internal or external.
> x64 has the drivers needed.
>
>
> "wewa" <nomail@wewa.no> wrote in message
> news:ebg0INE9FHA.1188@TK2MSFTNGP12.phx.gbl...
>>I have a client who went with a x64 system from my recommendation (Brave!)
>>and so far so good. I was worried about a Laserjet driver, but the LJ 5000
>>GN printer they have is supported natively by x64. Whew.
>>
>> So now, their digicam software/driver is not compatible, and they prefer
>> a media reader anyway.
>>
>> Anyone try, or know of a Half Height Internal or External USB card reader
>> that I can stick on this machine that has x64 drivers?
>> That way, they can read their CF/SM/MS/XD/MMS/ABC/DoReMe/FUD cards from
>> their digicams.
>>
>> Thanks.
>>
>
>

Jud
Mon Nov 28 19:25:16 CST 2005

On Mon, 28 Nov 2005 10:49:58 -1000, "wewa" <nomail@wewa.no> wrote:

>Hmm,
>
>Could've sworn i needed drivers for some of them back in the Win32 days...
>:)
>
>I will give it a shot naked!

I'll confirm that you don't need seperate drivers. I have an Elecom
multi-card reader, which I plugged in. Drivers were installed
automagically, and I could read my memory-cards.

jud

vcast
Mon Nov 28 20:55:51 CST 2005

wake up


"restperiod" <not@real> wrote in message
news:u$n5gtF9FHA.1140@tk2msftngp13.phx.gbl...
>
>
>
>
>
> "wewa" <nomail@wewa.no> wrote in message
> news:ebg0INE9FHA.1188@TK2MSFTNGP12.phx.gbl...
>>I have a client who went with a x64 system from my recommendation (Brave!)
>>and so far so good. I was worried about a Laserjet driver, but the LJ 5000
>>GN printer they have is supported natively by x64. Whew.
>>
>> So now, their digicam software/driver is not compatible, and they prefer
>> a media reader anyway.
>>
>> Anyone try, or know of a Half Height Internal or External USB card reader
>> that I can stick on this machine that has x64 drivers?
>> That way, they can read their CF/SM/MS/XD/MMS/ABC/DoReMe/FUD cards from
>> their digicams.
>>
>> Thanks.
>>
>
>