Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Vista bullet-proof install steps Another Vista install, another learning experience. This time it was a Gigabyte mobo, with 790FX (a.k.a. "spider") northbridge and SB600 southbridge, both ATI chipsets. I had not read this kb http://support.microsoft.com/kb/931369 previously so I found myself with a neverending installation. A Vista green screen with mouse pointer and hourglass that would never go away while the hard disk was spinning and spinning. To make a long story short, THIS is what should always be done to have a "safe", bullet-proof and enjoyable Vista installation experience. 1.- Use a standard IDE DVD drive for booting Vista installation, even if you won't use it later. You can plug your shiny brand new DVD/RW sata drive once the installation has finished. 2.- Only plug the hard disk (or disks for RAID, if applicable) that will be the home of the operating system. 3.- Disable in BIOS all hard disk controllers except for IDE and the one that holds the drives 4.- Don't plug any external hardware except for the mouse and keyboard. I would recommend vanilla PS/2 mouse and keyboard, even if you won't use them later. 5.- Disable on-board audio, parallel port, etc. You can enable them later. 6.- PCI and PCIe, only put your graphic card. You can add the other gizzmos later. 7.- If applicable, have ready a floppy/pen drive with drivers for your hard disk controller (or RAID). 8.- Use a maximum RAM memory of 2 gigabytes for the installation. The rest of the sticks can be added when Vista is up'n runnin'. 9.- This should be step 0. Flash BIOS with the latest one obtained from the mobo's manufacturer web site. It surely fixes issues and enables the latest processors. 10.-Have coffee ready, sit down, relax and enjoy! :) Carlos Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60569
  - 2
    - OT - Triple boot MAC OSx, Vista x64, Ubuntu x64 I found this article whose title "Triple-boot Macbook Pro: OSX Leopard, Vista 64-bit and Ubuntu 8.04 64-bit" migh appeal somebody in this NG. http://geeklimit.com/2008/07/02/triple-boot-macbook-pro-osx-leopard-vista-64-bit-and-ubuntu-804-64-bit/ All owners of MacBook Pro have fun! :) Carlos Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60563
  - 3
    - nero stuck in add and remove programs I have an old version of nero that has been removed from my xp 64 bit os, and it is still in the add and remove program list, I tried the nero clean tool, and looking in the regedit to find the entry, but could not find it. Anyone know how to manualy remove programs from the add and remove prgram list in window xp pro 64 bit? Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60554
  - 4
    - Screen Scrolling Effect I've formatted my pc a number of times and I've always been able to change the display from the scrolling screen, like ocean waves, to just moving items straightly. I've gone into Display > Appearance > Effects and chose "Fade Effect." When that option didn't change the ocean wave effect, I chose Scroll Effect. That one didn't change the ocean wave effect either. I've always been able to change that setting but I might have forgotten and I be looking in the wrong place. Is that setting located somewhere else? I'm starting to get sea sick. -- Denise Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60547
  - 5
    - 64-bit Cisco VPN Client I bought an HP Notebook to replace an old desktop that was running Windows XP Pro. The notebook was configured with: a.. Vista Home Premium (64-bit) SP1 b.. Intel Core 2 Duo T9300 @ 2.50 GHz c.. 4.00 GB RAM To my dismay, I have discovered that the VPN client that my government agency requires to connect to my office network will not install on the notebook. The client is a 32-bit program and my IT department does not provide a 64-bit client. So my new notebook was rendered useless as a computer to telework with. I configured it as a 64-bit Vista OS because HP sales told me it was needed in order to be able to use the 4 GB of RAM. With memory becoming more affordable, it seems to me that more purchasers of new PCs will be taking advantage of the 4+ RAM options and hopefully companies like Cisco will see fit to release 64-bit versions of their programs. I have replaced the OS with a 32-bit Vista Home Premium and installed the VPN client. The tradeoff: loss of about a gigabyte of RAM for the ability to use my notebook to do my job. Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60538
  - 6
    - DirectX In Win XP Pro x64 SP2 dxdiag.exe 64bit wrongly reports the CPU as AMD64, while 32 bit correctly reports Intel. System Information reports the CPU correctly. I downloaded directx_jun2008_redist.exe, expanded it and ran dxsetup.exe. It seemed to go through an install process and I rebooted. However dxdiag.exe reports no change to dx file dates and the CPU information is still wrong. This matters because all the 64 bit display drivers that don't work are placed by the NVIDIA installer in c:\NVIDIA\Win2KAMD64\xxx. I want to be sure I am installing drivers for Intel CPU, not AMD. What should I do next? Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60500
  - 7
    - Problem with IE 7 32bit under XP 64 Hi I have a problem with IE7 32bit running on my XP64bit machine. The IE 64bit version works fine and I'd be happy just to stick to that, but I can't access the MS Update page using the 64bit version - it requires me to use the 32bit version. The problem is when you open IE7 32bit it seems to just hang. The interface opens as normal and the tab reports that is is connecting, but nothing happens. It also sends processor usage right up...as though it is doing something. Unfortunately, no matter how long you leave it nothing happens. You can't close the app either and I have to resort to killing the process manually. I have tried reinstall the application but this hasn't changed anything. Does anyone have any suggestions??? Cheers A -- CastlemaineGold ------------------------------------------------------------------------ CastlemaineGold's Profile: http://forums.techarena.in/member.php?u=52376 View this thread: http://forums.techarena.in/showthread.php?t=995071 http://forums.techarena.in Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60499
  - 8
    - my computer won't let me format from Vista x64 to XP Pro x64 What do I need to do to format my pc to XP Pro x64? I did all the right things but when I pressed F to format my C drive, it said that I couldn't do it. -- Denise Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60495
  - 9
    - 3124_vista_x64_logo_1.1.13.0 & SiI3726 Firmware won't install I'm having a lot of problems installing Vista x64 software/firmware. Vista x64 installed with no problems. I need to install 3124_vista_x64_logo_1.1.13.0 and SiI3726 Firmware and Firmware Update Utility for the NORCO-4618 Controller Card. I'm able to install only about 1/4 of the programs that I use. Does anyone have an idea why I can't install Vista x64 programs: This is a list of my pc components: - ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA (RAID) . . . . VIA K8M890 + VT8237A . . . . 2000/1600 HT/s . . . . Dual-channel DDR400, Max 2GB . . . . VIA Integrated Gfx in North Bridge K8M890 . . . . 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI . . . . 2 *ATA133 ,2 x SATA . . . . 10/100 LAN . . . . 6-Channel audio - Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array not set up) - AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache Socket 939 Processor - ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler - Corsair 620W PSU - Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered - NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID 0/1/5/10/JBOD -- Denise Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60472
  - 10
    - Congratulations Our Colin was just re-awarded as an MVP. He had a short break from it, but he's back, and I think he well deserves it. (and yes, if you've been paying attention, you'll have noticed the little MVP bug on his posts showed up a few days early. But it wasn't official until today.) -- Charlie. http://msmvps.com/blogs/xperts64 http://mvp.support.microsoft.com/profile/charlie.russel Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60468
  - 11
    - WinRar Hi, I just tried to install WinRar but received this message: "An unexpected error is preventing the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem: 0x80004005 Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60464
  - 12
    - "Error 1721. There is a problem with this Windows Installer packa I have some programs that are for the components in my computer, such as my cpu. I just tried to install the Dual Core Optimizer and received a message that says "Error 1721. There is a problem with this Windows Installer package. A program, required for this install to complete could not be run. Contact your support personel or package vendor. Action:InstTool, location: C:\Windows\Installer\MS1779.tmp, command:" I opened another thread where I mentioned Vista x64 won't install my motherboard software. Is this the reason why these type of programs won't run? How can I get Vista x64 to run my motherboard software and these programs? I opened D: and tried to manually install all the software but Vista x64 wouldn't let me do that either. -- Denise Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60463
  - 13
    - Where are the arrows to press to go up and down? Hi . . . it's me again. Where are the arrows to press to go up and down? I see back and forward and backward but no up or down. down. -- Denise Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60462
  - 14
    - I can't install my motherboard software Whenever I put my motherboard DVD in the DVD drive, nothing happens. I used to have XP Pro x64 and it worked with that os. As a matter of fact, most of my programs won't install, such as AdAware, video programs such as BeSweet, computer programs such as Advanced Windows Care, etc. I receive messages that a file is missing from each of the programs that won't install. Another message that I receive says "This problem was caused by a compatibility issue between this version of Windows and this version of Microsoft Deprecated DLL Components." And, btw, where's Add/Remove Programs that used to be in Control Panel? -- Denise Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60461
  - 15
    - Where's the Vista x64 Discussion Forum? Hi, I think that the subject says it all. I just switched from XP Pro x64 to Vista x64 and I can't find the Vista x64 forum. Would someone give me the url for it? -- Denise Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60459
  - 16
    - 64 bit Cisco VPN Client? Reposted from m.p.w.vista.general.... <snipped> Does Cisco have VPN client for Vista 64 bit? Would there by any other options that would support IPK protocol? http://www.google.com/search?hl=en&q=cisco+vpn+for+Vista+64-bit&btnG=Google+Search http://www.cisco.com/ <snipped> Thanks. I tried there first. The Cisco AnyConnect for 64 bit is the only one they support, but it is only SSL and not IPSec authentication. Is there another type of client that will allow that with a Cisco VPN? Cisco states this: The Cisco VPN client supports Windows 2000, XP and Vista (x86/32-bit only); Linux (Intel); Mac OS X 10.4; and Solaris UltraSparc (32 and 64-bit). Thanks, R "Colin Barnhorst" <c.barnhorst@comcast.net> wrote in message news:76D015F2-05AB-4A73-8AC7-4034B616F7CF@microsoft.com... A better place to take this question is the microsoft.public.windows.64bit.general ng. I say that only because I have seen Charlie Russel and Carlos comment on this very question there. >>>>>>>>>>>>>>>>>>>>>>>>>> Thanks. will do. - R Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60449
  - 17
    - Leadtek Quadro FX3500 I ordered from a VAR an NVIDIA Quadro FX 3500 along with a 64 bit mobo and Win XP x64, but was supplied with a Leadtek Quadro FX 3500. Although it works with the Win default VGA driver, it will not work with any driver from Leadtek or NVIDIA. I can find no mention of 64bit on the box, user manual or Leadtek web site so I am suspecting that the Leadtek BIOS does not support 64bit. Is this likely? Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60442
  - 18
    - Vista Ultimate I want to purchase a 64bit version of windows vista ultimate and download it... is this at all possible? If it is could you link me up? Thanks a ton! Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60434
  - 19
    - IE7 on X64 - This PC, X64, or? I have found some occasional problems with websites, but only using IE7 on X64. I don't personally know anyone else with x64, so I cannot confirm whether the error is this PC or Microsoft. If there is anyone out there with a Netgear DG834G, would you log into it using IE7 (either 32 or 64 bit) and tell me if the Wireless page displays, or does not display. It displays with Mozilla and Safari, but not IE7. All the other DG834G pages work fine - it is just the wireless page that shows up empty - noting the help along the right side and the menus on the left both display just fine. Online checkin with Virgin Blue also does not redirect to the checkin page from the home page, it just displays an empty page and "done". Safai or Mozilla work fine. There are a VERY SMALL number of other non-functioning web pages using IE7. Both Mozilla and Safari usually work fine, and I reinstalled IE7 from the download site (but did not uninstall-reinstall, which could be a fatal error in itself). With some confirmation it would work, a total uninstall reinstall would be next. Does anyone else experience such problems? Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60417
  - 20
    - Backup software What are my options for backup software for SCSI DDS3 tape and Win XP x64? Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60415
  - 21
    - Another Vista install tip Along time, more and more people is moving on to Vista. Guess who they call in town when they have a trouble? This one took me one hour to solve it. I was supposed to be an easy one. Vista x64 on an nVidia nForce 550 based mobo, had disks in RAID, IDE DVD was just a piece of cake. Well... not. After booting off the DVD, Vista would ask for DVD drivers!!! Drivers for vanilla IDE? WTF? I tried every known recipe. Flash BIOS, reduce memory speed (they were only 2 gigs!), increase memory voltage, disable every non necessary device, unplug everything. No dice. Until I took a closer look at the DVD IDE flat cable. It was an "old" 40 conductor cable as opposed to the newer 80 conductor ones. I replaced it, using a very bad looking ugly 80 conductor I had in my junk box and that was it. No more asking for IDE drivers, smooth install. :) Carlos Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60412
  - 22
    - Trying to install XP X64 I just bought the XP Pro X64 software and I am trying to install it on my PC. I am switching from XP home to X64 so I know that I will have to format my old drive and install a fresh copy of the X64. When I try to boot from the CD I get a weird error message. It says "File \AMD64\NTKRNLMP.EXE COULD NOT BE LOADED The Error code is 7" I have a qx6600 processor. What should I do ? Did they make a version for AMD and one for Intell ? -- tsartele Posted via http://ms-os.com Forum to Usenet gateway Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60407
  - 23
    - Switching from XP Pro X64 to Vista X64 In the last 2 post that I started, I mentioned problems that I'm having finding drivers and programs for XP Pro X64. I'm strongly considering buying Vista X64. I know that I'll have to update drivers but is there anything else that I'll need to do. Will my hardware components work with Vista X64 since they work with XP Pro X64? -- Denise Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60384
  - 24
    - Intel Raid Drivers for D975XBX Motherboard I have a computer with the Intel D975XBX Motherboard in it (not the XBX2). This has 4 Intel Sata connections & 4 Silicon Images Sata connections. I plan to load Vista x64 on this system and run it with Raid 1 on my disks. The raid F6 disks that came with it do not have Vista Drivers on them. I have gone to the Intel Website and downloaded the raid F6 files for the Silicon Images Sata connections; but, there appear to be no raid F6 drivers for the Intel Sata connections. Has anyone installed Vista on this motherboard using Raid? If so, what drivers did you use and where did you get them? I'm referring to the Raid drivers for the Intel connections. Larry Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60377
  - 25
    - Lost file for "Internet Connections" Greetings all, I've bought Windows XP Pro -64bit, and loaded it onto a system which previously had Vista. It's up and running, but i cant find the "internet Connection" files (normally in "Control Panel") and i'm stuck !! Any help would be greatly appreciated. Thanking you in advance, Regards, Neil Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60363
- Next
  - 1
    - How to identify the bitness of a dll Hi, How to identify the bitness of a dll/exe programatically? Is there any Windows/.NET API that supports this programatically? That is , i just want to create a program which will take a dll/exe as input and identify whether it is a 32 bit or a 64 bit dll/exe.. Appreciate your comments. Thanks Santhosh Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60359
  - 2
    - Hyper-V RTM http://msmvps.com/blogs/xperts64/default.aspx Download today, or wait till early July for WU/MU of your existing environments -- Charlie. http://msmvps.com/blogs/xperts64 http://mvp.support.microsoft.com/profile/charlie.russel Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60329
  - 3
    - A little help from my friends! This is a sharing issue but I hope my buddies will be able to help me. I have 3 hard disks in my PC. One is standalone SATA (I:) and there's where I keep my documents, favorites and e-mail. The two others are raid-0 SATA, having Vista in Primary Partition C: and 4 other partitions for different tasks. (D:, E:, F: G:) So far I have been sharing in my home network only one folder in the standalone disk (I:). I can access to that folder from the other PCs by having added the user "Guest" ("Invitado" in Spanish) in the sharing options. When working locally on that folder I have full R/W rights and when accessing remotely I can only read. So far so good. Now here's the issue. Whenever I share a folder in any of the other 4 partitions (D:, E:, F:, G:) I immediately lose writing rights on that folder. I, locally, can only read but not write or delete or rename. Even un-sharing is denied. And the only possible recovery of rights is by going to Disk Management, delete the partition, recreate it again and not sharing it! Any ideas? Carlos Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60328
  - 4
    - Flash install notes for Vista I came accross this interesting article regarding problems when running Adobe's Flash in both Vistas (x86 and x64). http://www.ocmodshop.com/ocmodshop.aspx?a=1201 Essentially what the author claims is that, if you have recurring prompts for installing Flash even if you did a zillion times, you might want to try this: "For Vista (32 bit): Open File Explorer Navigate to C:\Windows\System32\Macromed\Flash Right-click on FlashUtil9f (or whatever version you downloaded) Select Run as Administrator If you haven't turned UAC off, then you'll get a prompt. Let the wizard install Enjoy Flash For Vista x64: Open File Explorer Navigate to C:\Windows\SysWOW64\Macromed\Flash Right-click on FlashUtil9f (or whatever version you downloaded) Select Run as Administrator If you haven't turned UAC off, then you'll get a prompt. Let the wizard install Enjoy Flash" Carlos Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60322
  - 5
    - Need to find a VIA PSI to PCI Bridge Controller I'm also looking for a VIA PSI to PCI Bridge Controller. Again, I can't find it anywhere. This is what I have: - ASUS A8V-VM SE Socket 939 Micro ATX Motherboard - UDMA133, SATA (RAID) - VIA K8M890 + VT8237A - 2000/1600 HT/s - Dual-channel DDR400, Max 2GB - VIA Integrated Gfx in North Bridge K8M890 - 1 x PCI-E X16, 1 X PCI-E X 1, 2X PCI - 2 *ATA133 ,2 x SATA - 10/100 LAN - 6-Channel audio - Seagate Barracuda 7200.10 SATA 3.0 Gb/s 320Gb hard drive (RAID array not set up) - AMD Athlon Gforce 8400 64 X2 4200+ Toledo 2.2GHz 2 x 512KB L2 Cache Socket 939 Processor - ARCTIC COOLING Freezer 64 Pro 92mm CPU Cooler - Corsair 620W PSU - Ballistix 2x1G RAM, 184-pin DIMM, 128MX64 DDR PC3200, Unbuffered - VGA MSI NX8400GS-TD256EH 8400GS RT Video Card - NORCO-4618 PCI-X / PCI eSATA / SATA II / SATA I Controller Card RAID 0/1/5/10/JBOD - Windows XP Pro X64, SP2 - NetFramework 2.0 Redistributable Pack for X64 Updated Drivers: - Asus Bios Update v 71401 - Nvidia - 93.71_forceware_winxp64_english_whql - GeForce Release 175 - Realtek ALC883 Audio Driver V5.10.0.5296 - Realtek High Definition Audio Driver R1.96 - SATA Controller Card 3124_x64_11130_logo - SiI3726 Firmware (for SATA HUB) - SiI3726 Firmware Update Utility (for SATA HUB) - VIA Hyperion Pro v 518a Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60317
  - 6
    - ASPI for XP x64 I've been looking for ASPI for XP x64 but haven't been able to find it. My converter programs won't work without it. Does anyone know where I can find it? Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60315
  - 7
    - Tony was right again! One of most recommended fixes by Tony is to upgrade (flash) your BIOS to the latest version in case of strange troubles. I helped one friend of mine who could not add a second DDR-667 2 gigs memory stick to his brand new Gigabyte GA-MA790FX-DS motherboard (Vista x64). 2 gigs DDR-667, Vista would boot Ok. 4 gigs DDR-667, Vista would BSOD on boot. His BIOS was ver F3 so I downloaded the latest one, a.k.a. v F6. And that was it! Vista is now happy with 4 gigs. Carlos Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60311
  - 8
    - x64 upgrade from x86 i've got xp pro x86, and i'd like to get x64. i don't, however, want to re-purchase the whole thing (by next monday, no less). i remember hearing about a way to acquire xp pro x64 for a nominal fee rather than paying the full 150$ for the new software. is that still in effect? was it ever in effect? how would i go about upgrading if i didn't want to spend that much money? Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60289
  - 9
    - Slow performance for 32bit programs Is there any way to enhance the performance of 32-bit programs running on 64-bit Windows Vista? Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60278
  - 10
    - vista 64 cant find my drivers after restart, even tho they are the Hi, thanks all for your help. I have an OEM version of 64 bit home pro, and don't get support from microsoft...Thats lame. Anyway I have several devices I have installed: a logitech trackball, WD sata HDD, and unknown. these devices all work properly and are in device manager, detected and working fine with drivers installed. If i choose install later, there is no problem. If I choose find drivers, Vista will not find them, even if I put in the disk, or direct it in a browse to the proper location. If I say dont install I will do it later, the divice stops functioning. I am prompted to install an update, and when I download it, I am told it does not apply to my system. Any help here is greatly apreciated! Asus Maximus Formula, promisetek t2650 raid card with 2 fujitsu SAS HDD in striped raid 0, 2 asus EAH3870 TOP in crossfire, 4gigs OCZ reaper 1066, 1010w OCZ game extreme PSU, asus DVD drive, Pioneer dvdrw, rosewill multicard reader, WDD SATA HDD, ninja case. windows vista 64bit home pro OEM. Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60270
  - 11
    - Dual Opteron 2.2 Ghz performance. I'm being offered a Dual Opteron 2.2Ghz box at about $300. The machine comes with a SCSI controller/drive and with 3 GB RAM, but is capable of handling up to 16GB. The machine is in good working condition and I'm thinking that at $300 it's almost a giveaway. I'm thinking I may get the box as a "toy" and install an x64 version on it. Anyone here familiar with dual Opeterons? Are those dual 2.2 Ghz worth a try? John Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60234
  - 12
    - CredUIPromptForCredentials Trying to use CredUIPromptForCredentials function but it gives me errors when compiling? I am using the headers: Windows.h and WinCred.h - Error message (if any): fatal error LNK1120. Error LNK2019: unresolved external symbol __IMP__CredUIPromptForCredentailsW@40 refrenced in fucntcition "public:void __thisCall CMMC::OnBnClickedOk(void)"(?OnBnClickedOk@CMMC@@QAEXXZ) - Please state what you did and where the process failed: I just compiled it. and I get this errors. I am using the proper header files and followed instructions. - Additional information (if any): I just followed the MSDN instructions. Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60207
  - 13
    - PCI TV Tuner for Windows XP x64 Hi All, I've been using Windows XP x64 for two years and I am very pleased with this OS. I've been searching and haven't had much luck finding a TV Tuner for Windows XP x64. The Hauppuage support site doesn't appear to support Windows XP x64 (Vista 64 only). Can anyone recommend a TV Tuner for Windows XP x64? I just want to watch TV on my computer and occasionally record a TV show. Thanks in advance, -- Jim N Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60204
  - 14
    - 175.19 Nvidia x64 drivers WHQL Out today for Vista and XP x64, GeForce 7, 8, 9: http://www.nvidia.com/object/winvista_x64_175.19_whql.html http://www.nvidia.com/object/winxp64_175.19_whql.html -- Asus P5WDG2 WS Pro Coreâ?¢ 2 Extreme X6800 VelociRaptor 2x300 GB 8GB DDR2 800MHz GeForce 8800GTX Eizo 30" Enermax 1000W 75A@+12V LAN 100/100 XP x64 SP2 dualboot Vista x64 SP1 (slipstreamed) Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60200
  - 15
    - 175.19 Nvidia x64 drivers WHQL Out today for Vista and XP x64, GeForce 7, 8, 9: http://www.nvidia.com/object/winvista_x64_175.19_whql.html http://www.nvidia.com/object/winxp64_175.19_whql.html -- Asus P5WDG2 WS Pro Coreâ?¢ 2 Extreme X6800 VelociRaptor 2x300 GB 8GB DDR2 800MHz GeForce 8800GTX Eizo 30" Enermax 1000W 75A@+12V LAN 100/100 XP x64 SP2 dualboot Vista x64 SP1 (slipstreamed) Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60199
  - 16
    - Lost Vista games I have wrecked Vista Ultimate x64 to the point of my games and Windows features not working. I have a Intel 965 chipset with ICH8R and run 3 Raptors in a RAID 5 config. I have a 4th. drive, 80gb Barracuda, for Linux and storage. I got a wild hair to try Slackware. After what I felt was a productive couple of hours learning about Linix fdisk and getting a root and swap partition set up I managed to write over my second drive of the RAID config. I run the Windows Vista disk repair utlitly a couple of times to no avail and them realized what Slackware had done to my middle drive. I unplugged the middle drive and it booted to vista and started rebuilding the array with the missing drive. I shut down and plugged the middle drive back in thinking I would need to wipe it but Vista came up and the Intel Matrix Storage Manager started rebuilding the drives. It finished and the system runs just great like before except my Games won't open. Crysis still runs from the folder but Windows Solitaire, Mahjong, Spider, etc. all say wcp.dll isn't for this Windows or is corrupt. I have got it off the install disk and replaced it. I also tried sfc /scannow with no luck. Baffled with format c: closing in! Thanks for any suggestions. -- Sam Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60178
  - 17
    - vista 64 - mouse pointer stuck in top left corner of screen hey all yesterday i had to reinstall vista due to hdd failure, i reinstalled no problems and to reward myself thought i'd play call of duty, excellent no problems there. Today i thought i'd kick some butt again and now disaster! My mouse pointer refuses to move from the top left corner of the screen on the main menu of call of duty. I also tried Call of duty UO and lo, the same problem - not happy. I've made no changes to anything, other than downloaded and installed SP1 after my game last night. I don't know if it's anything to do with my screen settings, currently the resolution is set to 1680x1050 but i'm sure that yesterday it was set 2080xsomething. i did mess around with the dpi because on some programs, nero, windows mail the text seemed blurry. anyone offer any advice? thx Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60169
  - 18
    - Just installed WS2k8 x64 Trial! Well, I keep hearing good things about this, and I'm curious so here I go. Only, even in the initial steps it refuses to allow me to download from Avast, each time I try and add it to the trusted zone (that is what I think I'm doing?) I'm back at the download link which connects to a different server from which I am then barred because it is not listed as a trusted zone - and so on 'ad infinitum'. Tony. . . Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60168
  - 19
    - Enable/Disable driver signature This should be made an option rather than an imposition. I know there are certain advantages of using it but it should be my decision if I want to use an unsigned driver or not. I installed Vista64 because i believed a phrase I saw at microsoft.com saying Vista64 was great for gamers. Well, us gamers sometimes like to modify/patch our systems. In my case I bought a USB mouse which will fail to read all my movements if I use the default USB driver which runs @ ~125MHz (standard USB speed). But I can modify this usb driver so it will allow my USB port to run @ 1000MHz. Thus making my mouse superior to almost any other mouse model in the market right now. Increasing the USB rate has different results on different models of mice, I bought mine with the intention of using a 1000MHz USB driver knowing it would give me superb results for that mouse model, and it worked fine on WinXP, even on Vista32. Well now that I just installed Vista64 I'm presented with the surprise that I can't use my modified driver because it's obviously unsigned (it's custom made, thus it will never be signed). Having to press F8 each time Vista boots to disable signed drivers doesn't sound fair. I should be the one who decides what can and cannot be installed on my system. Why not make it optional? I was starting to consider going back to WinXP 32bits if it weren't for the fact that I found a program which will disable this. Once again, I've been forced to download and install some third-party software to fix something that Microsoft simply couldn't present to me as a choice. I mean, it's ok if you set it on by default so unexpirienced users can't install drivers that might do who knows what. But why cripple people who know what they are doing? At least give them a choice other than changing the OS. I can't see how making this a choice would be a problem. Thanks for reading. ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane. http://windowshelp.microsoft.com/communities/newsgroups/en-us/default.mspx?mid=bd115ae4-1732-4ad1-bd48-56f3876db384&dg=microsoft.public.windows.64bit.general Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60167
  - 20
    - Windows Vista SP1 64Bit update Hi all, hope some one can help out there? Have installed sp1 three times now and each time I cannot start my pc afterwards I have to repair via Vista disk (restore) . The screen just goes blank and there is no H/D activity??? Once restored all is ok, this has happened each time I have tried. AMD 3400+ 2gig ram/raid/asus x800xl/ext h/d usb 500gig/2X lg dvd rw/ 800psu asus mobo? VISTA 64 ultimate Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60132
  - 21
    - XP 64Bit installation USB devices Will XP 64Bit Edition install onto a USB connected Sata2 harddrive? XP Home Editon will already be installed onto a motherboard connected Sata harddrive. The bios has boot from USB devices settings. -- ...scribble...scribble...scribble... Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60128
  - 22
    - Display Print in WordPerfect error. Hello. This is such a strange problem (to me, anyway). I have my "style" set for Times New Roman, 10 pt., 2 column newspaper. But now, all my WP documents are showing up at about 24 pt, bold. It even goes beyond the margins. I checked the Style, and all is as I set it up. I checked "view", and saw only what it usually does - it was all as I set it up. I don't know what I did to affect the change. I even restored to before it happened, that didn't help. Does anyone have an idea of what might have happened? Thanks in advance for any assistance. S. Young Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60116
  - 23
    - Audio and Video Problems in Windows Media Center Hi Everyone, I have a problem with Windows Media Center on my Vista Ultimate x64 system (4 GB RAM), using an AVerMedia M791 PCIe Combo NTSC/ATSC tuner with Comcast analog cable. Every few days, something goes wrong when I record a program or watch live TV. On playback, the audio stutters and skips and is out of sync with the video. The video is broken up. showing parts of different frames simultaneously. Sometimes, a large part of the picture is solid green. A program recorded at 7 PM might have the problem, while one recorded at 9 PM the same night is fine. When live TV is having the problem, closing and re-opening Windows Media Center usually fixes it. Sometimes, a reboot is required. I haven't seen the problem on my 32-bit XP MCE system or on my regular TV set. Any suggestions of how to fix it? -- Best Wishes, Steve Winograd, MS-MVP (Windows Networking) Microsoft Most Valuable Professional Program http://mvp.support.microsoft.com Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60105
  - 24
    - OT - Tony, OpenSUSE 11 is out News here: http://software.opensuse.org/ And download here: http://download.opensuse.org/distribution/11.0/iso/ :) Carlos Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60098
  - 25
    - Install hangs up after 'Download' and before 'Install' I'm using XP Professianal SP3 (hope so) in stand-alone, with ADSL dial-up, logged in with an account having administrator rights. I have the big problem that I cannot install new programs anymore (included the updates for XP...!). When I download the program or updates, the download themselves are very well executed, but when it comes to the point where is says 'installing begins' ore something simular depending on the program/application I want to install, the CPU got into a complete hang-up and I ave to reboot it manually (power off), even the tsk-manager is in hang-up8 Or it states after a sussesful dowload : "estimated time felftover : 1 sec" and it hangs up (this is the case too with an automatic or a manual update...). However, some programs of eg 'GiveAwyOfTheDay) do install, others give the same reaction as described above. I have already executed a lot of 'healing programs' (PChealth, Spybot, Ad-Aware and a lot of others), but no cure... And a couple of virus-checkers of course... What is going on? Tag: Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury Tag: 60097

Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404), Best Luxury
Watch - www.luxury-gift.org

Luxury Gift : http://www.luxury-gift.org
Jaeger LeCoultre Watches : http://www.luxury-gift.org//jaeger-lecoultre-watches.html
Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404) Link :
http://www.luxury-gift.org/Watches/jaeger-lecoultre-watch-1124.html

Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404) Information :
Brand : Jaeger LeCoultre Watches
Series : Master Ultra Thin
Code : 145.84.04 (q1458404)
Gender : Mens
Case Material : Stainless Steel
Dial Color : Silver
Bracelet Strap : Leather - Black
Movement : Manual Wind
Clasp Type : Deployant Clasp
Bezel : Fixed
Crystal : Scratch Resistant Sapphire
Case Back : Transparent
Case Diameter : 35mm
Case Thickness : 5.8mm
Water Resistant : 30m/100ft.

Black crocodile leather strap with stainless steel folding buckle,
Silver-tone hands and hour markers.

Jaeger LeCoultre Master Ultra Thin 145.84.04 (q1458404) Link :
http://www.luxury-gift.org/Watches/jaeger-lecoultre-watch-1124.html

Top