I have Vista Ultimate 64 with MSFT's Intellimouse Explorer 4.0a mouse
and Intellipoint software 6.20.182.0

When I turn off my PC I usually lose the pointer speed setting and find
it's been reset to the middle postition which is faster than I want.

Anyone know of a similar problem or, better yet, a fix?

FWIW, all the other setting seem to stay the same, scrolling speed,
button assignments, etc. haven't changed.



--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

RE: Intellipoint help please? by Carlos

Carlos
Fri May 09 14:51:31 PDT 2008

Hi,
This is what I would do.
- Uninstall Intellipoint 6.2 software
- Reboot and let Vista "see" the mouse as a generic one
- Reinstall Intellipoint 6.2 software
There is no harm in trying that.
Best of luck.
Carlos

"XS11E" wrote:

>
> I have Vista Ultimate 64 with MSFT's Intellimouse Explorer 4.0a mouse
> and Intellipoint software 6.20.182.0
>
> When I turn off my PC I usually lose the pointer speed setting and find
> it's been reset to the middle postition which is faster than I want.
>
> Anyone know of a similar problem or, better yet, a fix?
>
> FWIW, all the other setting seem to stay the same, scrolling speed,
> button assignments, etc. haven't changed.
>
>
>
> --
> XS11E, Killing all posts from Google Groups
> The Usenet Improvement Project:
> http://improve-usenet.org
>

RE: Intellipoint help please? by XS11E

XS11E
Fri May 09 15:34:39 PDT 2008

Carlos <Carlos@discussions.microsoft.com> wrote:

> This is what I would do.
> - Uninstall Intellipoint 6.2 software
> - Reboot and let Vista "see" the mouse as a generic one
> - Reinstall Intellipoint 6.2 software
> There is no harm in trying that.

Well, it can't hurt, I'll give it a shot! Thanks for the suggestion.

I tried something a bit different, I removed Intellipoint, rebooted,
opened up the mouse in control panel and set the pointer options as I
wanted them, then I installed IP. We'll see if that helps any.

--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

New Question, was: Intellipoint help please? by XS11E

XS11E
Sat May 10 11:34:37 PDT 2008

XS11E <xs11e@NOSPAMyahoo.com> wrote:

> Carlos <Carlos@discussions.microsoft.com> wrote:
>
>> This is what I would do.
>> - Uninstall Intellipoint 6.2 software
>> - Reboot and let Vista "see" the mouse as a generic one
>> - Reinstall Intellipoint 6.2 software
>> There is no harm in trying that.
>
> Well, it can't hurt, I'll give it a shot! Thanks for the
> suggestion.
>
> I tried something a bit different, I removed Intellipoint,
> rebooted, opened up the mouse in control panel and set the pointer
> options as I wanted them, then I installed IP. We'll see if that
> helps any.

Booted up the computer this AM and found the settings back to default
again so the above didn't help.

I give up on this because I've had a couple of other nagging problems
that seem to be growing and I'm thinking something needs to be
addressed. I've got a replacement DVD burner coming next week so I
think I'll install it and then do a fresh install of Vista and I'm
thinking of installing Ultimate 32 bit. I can't think of any good
reason to keep the 64 bit version and it does cause a problem or two
with some software....

I have the weekend to think about it more but any advice is welcome.




--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

RE: New Question, was: Intellipoint help please? by Carlos

Carlos
Sat May 10 14:50:01 PDT 2008

Can we help you with those "one or two" programs that are causing you problems?
64-bit is the way to go.
32-bit is the past.
:)
Carlos

"XS11E" wrote:

> XS11E <xs11e@NOSPAMyahoo.com> wrote:
>
> > Carlos <Carlos@discussions.microsoft.com> wrote:
> >
> >> This is what I would do.
> >> - Uninstall Intellipoint 6.2 software
> >> - Reboot and let Vista "see" the mouse as a generic one
> >> - Reinstall Intellipoint 6.2 software
> >> There is no harm in trying that.
> >
> > Well, it can't hurt, I'll give it a shot! Thanks for the
> > suggestion.
> >
> > I tried something a bit different, I removed Intellipoint,
> > rebooted, opened up the mouse in control panel and set the pointer
> > options as I wanted them, then I installed IP. We'll see if that
> > helps any.
>
> Booted up the computer this AM and found the settings back to default
> again so the above didn't help.
>
> I give up on this because I've had a couple of other nagging problems
> that seem to be growing and I'm thinking something needs to be
> addressed. I've got a replacement DVD burner coming next week so I
> think I'll install it and then do a fresh install of Vista and I'm
> thinking of installing Ultimate 32 bit. I can't think of any good
> reason to keep the 64 bit version and it does cause a problem or two
> with some software....
>
> I have the weekend to think about it more but any advice is welcome.
>
>
>
>
> --
> XS11E, Killing all posts from Google Groups
> The Usenet Improvement Project:
> http://improve-usenet.org
>

Re: New Question, was: Intellipoint help please? by Charlie

Charlie
Sat May 10 15:44:17 PDT 2008

I'm with Carlos on this - yes, you can go to 32-bit. But the future is
64-bit, so let's solve the problems. Also, just a gentle reminder that if
you want to run >3 GB of RAM, your only real option is 64-bit. (Yes, I know,
it's officially 4 GB, but there's no real way to access all of it, so why
spend the $$ on RAM that's hidden.)

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel


"XS11E" <xs11e@NOSPAMyahoo.com> wrote in message
news:Xns9A9A75C465B23xs11eyahoocom@127.0.0.1...
> XS11E <xs11e@NOSPAMyahoo.com> wrote:
>
>> Carlos <Carlos@discussions.microsoft.com> wrote:
>>
>>> This is what I would do.
>>> - Uninstall Intellipoint 6.2 software
>>> - Reboot and let Vista "see" the mouse as a generic one
>>> - Reinstall Intellipoint 6.2 software
>>> There is no harm in trying that.
>>
>> Well, it can't hurt, I'll give it a shot! Thanks for the
>> suggestion.
>>
>> I tried something a bit different, I removed Intellipoint,
>> rebooted, opened up the mouse in control panel and set the pointer
>> options as I wanted them, then I installed IP. We'll see if that
>> helps any.
>
> Booted up the computer this AM and found the settings back to default
> again so the above didn't help.
>
> I give up on this because I've had a couple of other nagging problems
> that seem to be growing and I'm thinking something needs to be
> addressed. I've got a replacement DVD burner coming next week so I
> think I'll install it and then do a fresh install of Vista and I'm
> thinking of installing Ultimate 32 bit. I can't think of any good
> reason to keep the 64 bit version and it does cause a problem or two
> with some software....
>
> I have the weekend to think about it more but any advice is welcome.
>
>
>
>
> --
> XS11E, Killing all posts from Google Groups
> The Usenet Improvement Project:
> http://improve-usenet.org


RE: New Question, was: Intellipoint help please? by XS11E

XS11E
Sat May 10 16:56:13 PDT 2008

Carlos <Carlos@discussions.microsoft.com> wrote:

> Can we help you with those "one or two" programs that are causing
> you problems?

No, unfortunately, unless you're CEO of Motorola and influential in
several other companies....

From Motorola:
"NOTE: Motorola Software Update works only with the following operating
systems:
Microsoft Windows 2000 (with Service Pack 4)
Windows XP (with Service Pack 2)
Windows Vista (32-bit)"

There's more.

BTW, remember, I've been here about as long as you have (since the
first beta of Longhorn, IIRC) and have straightened out dozens of
problems but there are some that can't be solved, software that's not
been updated and apparently never will be but w/o which I won't run a
PC such as IEPrivacyKeeper.

I may very well drop back to XP, everything works there. Sometimes you
need to know when you're whipped and after this many years it may be
time to admit defeat.... I'm too old and cranky to fool with these
things anymore, I just want a PC that works w/o having to turn off UAC,
w/o having to "run as administrator", w/o having to run in
compatibility mode (which never works!)


--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

Re: New Question, was: Intellipoint help please? by XS11E

XS11E
Sat May 10 16:56:56 PDT 2008

"Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote:

> I'm with Carlos on this - yes, you can go to 32-bit. But the
> future is 64-bit, so let's solve the problems.

See my reply to Carlos. I think it's time to quit.


--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

Re: New Question, was: Intellipoint help please? by Charlie

Charlie
Sat May 10 17:27:22 PDT 2008

Of course, if you run XP, you're running without UAC, as administrator, all
the time. With all the risks that entails. But it's certainly your choice,
and I respect it, even if I don't agree. You've been a positive and
contributing member of this newsgroup practically from the beginning, so
we'll miss you. But if you get bored, feel free to drop by. Carlos and I
will still be here. ;)

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel


"XS11E" <xs11e@NOSPAMyahoo.com> wrote in message
news:Xns9A9AAC4B06150xs11eyahoocom@127.0.0.1...
> Carlos <Carlos@discussions.microsoft.com> wrote:
>
>> Can we help you with those "one or two" programs that are causing
>> you problems?
>
> No, unfortunately, unless you're CEO of Motorola and influential in
> several other companies....
>
> From Motorola:
> "NOTE: Motorola Software Update works only with the following operating
> systems:
> Microsoft Windows 2000 (with Service Pack 4)
> Windows XP (with Service Pack 2)
> Windows Vista (32-bit)"
>
> There's more.
>
> BTW, remember, I've been here about as long as you have (since the
> first beta of Longhorn, IIRC) and have straightened out dozens of
> problems but there are some that can't be solved, software that's not
> been updated and apparently never will be but w/o which I won't run a
> PC such as IEPrivacyKeeper.
>
> I may very well drop back to XP, everything works there. Sometimes you
> need to know when you're whipped and after this many years it may be
> time to admit defeat.... I'm too old and cranky to fool with these
> things anymore, I just want a PC that works w/o having to turn off UAC,
> w/o having to "run as administrator", w/o having to run in
> compatibility mode (which never works!)
>
>
> --
> XS11E, Killing all posts from Google Groups
> The Usenet Improvement Project:
> http://improve-usenet.org


Re: New Question, was: Intellipoint help please? by Carlos

Carlos
Sat May 10 18:09:00 PDT 2008

And he might as well dual-boot XP and Vista x64 while the latter is mature
enough for him.
I wonder what Motorola program is he having problems with?
Motorola phone tools works in Vista x64 with the proper x64 drivers
available at:
http://developer.motorola.com/docstools/USB_Drivers/
Carlos

"Charlie Russel - MVP" wrote:

> Of course, if you run XP, you're running without UAC, as administrator, all
> the time. With all the risks that entails. But it's certainly your choice,
> and I respect it, even if I don't agree. You've been a positive and
> contributing member of this newsgroup practically from the beginning, so
> we'll miss you. But if you get bored, feel free to drop by. Carlos and I
> will still be here. ;)
>
> --
> Charlie.
> http://msmvps.com/blogs/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
>
> "XS11E" <xs11e@NOSPAMyahoo.com> wrote in message
> news:Xns9A9AAC4B06150xs11eyahoocom@127.0.0.1...
> > Carlos <Carlos@discussions.microsoft.com> wrote:
> >
> >> Can we help you with those "one or two" programs that are causing
> >> you problems?
> >
> > No, unfortunately, unless you're CEO of Motorola and influential in
> > several other companies....
> >
> > From Motorola:
> > "NOTE: Motorola Software Update works only with the following operating
> > systems:
> > Microsoft Windows 2000 (with Service Pack 4)
> > Windows XP (with Service Pack 2)
> > Windows Vista (32-bit)"
> >
> > There's more.
> >
> > BTW, remember, I've been here about as long as you have (since the
> > first beta of Longhorn, IIRC) and have straightened out dozens of
> > problems but there are some that can't be solved, software that's not
> > been updated and apparently never will be but w/o which I won't run a
> > PC such as IEPrivacyKeeper.
> >
> > I may very well drop back to XP, everything works there. Sometimes you
> > need to know when you're whipped and after this many years it may be
> > time to admit defeat.... I'm too old and cranky to fool with these
> > things anymore, I just want a PC that works w/o having to turn off UAC,
> > w/o having to "run as administrator", w/o having to run in
> > compatibility mode (which never works!)
> >
> >
> > --
> > XS11E, Killing all posts from Google Groups
> > The Usenet Improvement Project:
> > http://improve-usenet.org
>

Re: New Question, was: Intellipoint help please? by XS11E

XS11E
Sat May 10 19:24:37 PDT 2008

Carlos <Carlos@discussions.microsoft.com> wrote:

> I wonder what Motorola program is he having problems with?

Motorola Software Update and Radiocomm.



--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

Re: New Question, was: Intellipoint help please? by XS11E

XS11E
Sat May 10 19:31:36 PDT 2008

"Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote:

> Of course, if you run XP, you're running without UAC, as
> administrator, all the time.

I'm running w/o UAC now, IEPrivacyKeeper requires it be off because
it has never been updated for Vista, the last update was 2005.
IEPrivacyKeeper deleted cookies and Vista hides them in a folder named
Cookies/Low and, so far, I've been unable to do anything to fix that.
If I turn off UAC I can delete the Low folder and the cookie will then
be stored in Cookies so.... UAC is off.

There's a bunch of software that does essentially the same thing but
nothing that works as well or is as easy to use!

> You've been a positive and contributing member of this newsgroup
> practically from the beginning, so we'll miss you. But if you get
> bored, feel free to drop by. Carlos and I will still be here. ;)

Thanks, I'm sure I will. BTW, you said "positive" AND "contributing"
so do I owe you double the usual $10??? <BSEG>


--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org


Re: New Question, was: Intellipoint help please? by Charlie

Charlie
Sun May 11 10:22:54 PDT 2008

Price has gone up (Fuel Surchage.<G>) Single positive is now $10 + a $5
Surchage. With the upsell to "contributing member", you are talking $30,
plus GST and PST, of course. (Or, for EU members, we'll substitute VAT -
it's at least as onerous.<G>)

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel


"XS11E" <xs11e@NOSPAMyahoo.com> wrote in message
news:Xns9A9AC6A352693xs11eyahoocom@127.0.0.1...
> "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote:
>
>> Of course, if you run XP, you're running without UAC, as
>> administrator, all the time.
>
> I'm running w/o UAC now, IEPrivacyKeeper requires it be off because
> it has never been updated for Vista, the last update was 2005.
> IEPrivacyKeeper deleted cookies and Vista hides them in a folder named
> Cookies/Low and, so far, I've been unable to do anything to fix that.
> If I turn off UAC I can delete the Low folder and the cookie will then
> be stored in Cookies so.... UAC is off.
>
> There's a bunch of software that does essentially the same thing but
> nothing that works as well or is as easy to use!
>
>> You've been a positive and contributing member of this newsgroup
>> practically from the beginning, so we'll miss you. But if you get
>> bored, feel free to drop by. Carlos and I will still be here. ;)
>
> Thanks, I'm sure I will. BTW, you said "positive" AND "contributing"
> so do I owe you double the usual $10??? <BSEG>
>
>
> --
> XS11E, Killing all posts from Google Groups
> The Usenet Improvement Project:
> http://improve-usenet.org
>


Re: New Question, was: Intellipoint help please? by Carlos

Carlos
Sun May 11 11:17:16 PDT 2008

Have you tried here?
http://direct.motorola.com/hellomoto/motosupport/source/softwareupdateselect.asp?country=USA&language=ENS
Carlos

"XS11E" <xs11e@NOSPAMyahoo.com> escribió en el mensaje de noticias
news:Xns9A9AC573E8A07xs11eyahoocom@127.0.0.1...
> Carlos <Carlos@discussions.microsoft.com> wrote:
>
>> I wonder what Motorola program is he having problems with?
>
> Motorola Software Update and Radiocomm.
>
>
>
> --
> XS11E, Killing all posts from Google Groups
> The Usenet Improvement Project:
> http://improve-usenet.org


Re: New Question, was: Intellipoint help please? by XS11E

XS11E
Sun May 11 13:11:33 PDT 2008

"Carlos" <atashian01@remove_the_obvious_hotmail.com> wrote:

> Have you tried here?
> http://direct.motorola.com/hellomoto/motosupport/source/softwareupd
> ateselect.asp?country=USA&language=ENS Carlos

Yes, but they won't update it. It requires a 32 bit OS.



--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

Re: New Question, was: Intellipoint help please? by XS11E

XS11E
Wed May 14 22:48:55 PDT 2008

"Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote:

> Price has gone up (Fuel Surcharge.<G>) Single positive is now $10 +
> a $5 Surchage. With the upsell to "contributing member", you are
> talking $30, plus GST and PST, of course. (Or, for EU members,
> we'll substitute VAT - it's at least as onerous.<G>)

The new price is only good if you give S&H Green Stamps (Google them if
your just a kid!)

Posted from Windows XP Media Center Edition with Intellipoint working
perfectly!

Just dropping by to say "Hi" and thanks to all here for the past help.

--
XS11E, Killing all posts from Google Groups
The Usenet Improvement Project:
http://improve-usenet.org

Re: New Question, was: Intellipoint help please? by Charlie

Charlie
Thu May 15 08:44:34 PDT 2008

No S&H,but we do accept Canadian Tire Dollars...

(and I'm certainly WAY old enough to know what green stamps are.)

--
Charlie.
http://msmvps.com/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel


"XS11E" <xs11e@NOSPAMyahoo.com> wrote in message
news:Xns9A9EE817242C6xs11eyahoocom@127.0.0.1...
> "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote:
>
>> Price has gone up (Fuel Surcharge.<G>) Single positive is now $10 +
>> a $5 Surchage. With the upsell to "contributing member", you are
>> talking $30, plus GST and PST, of course. (Or, for EU members,
>> we'll substitute VAT - it's at least as onerous.<G>)
>
> The new price is only good if you give S&H Green Stamps (Google them if
> your just a kid!)
>
> Posted from Windows XP Media Center Edition with Intellipoint working
> perfectly!
>
> Just dropping by to say "Hi" and thanks to all here for the past help.
>
> --
> XS11E, Killing all posts from Google Groups
> The Usenet Improvement Project:
> http://improve-usenet.org


Re: New Question, was: Intellipoint help please? by Dennis

Dennis
Thu May 15 20:24:59 PDT 2008

The Top Value stamps were better looking and took less books to get things.
Have a great day.

--
Dennis Pack
XP x64 SP2, Vista Enterprise x64 SP1
WHS, Office Professional Plus 2007
"Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in message
news:B274ABD4-B459-41E7-A55E-EBEB368399BD@microsoft.com...
> No S&H,but we do accept Canadian Tire Dollars...
>
> (and I'm certainly WAY old enough to know what green stamps are.)
>
> --
> Charlie.
> http://msmvps.com/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
>
> "XS11E" <xs11e@NOSPAMyahoo.com> wrote in message
> news:Xns9A9EE817242C6xs11eyahoocom@127.0.0.1...
>> "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote:
>>
>>> Price has gone up (Fuel Surcharge.<G>) Single positive is now $10 +
>>> a $5 Surchage. With the upsell to "contributing member", you are
>>> talking $30, plus GST and PST, of course. (Or, for EU members,
>>> we'll substitute VAT - it's at least as onerous.<G>)
>>
>> The new price is only good if you give S&H Green Stamps (Google them if
>> your just a kid!)
>>
>> Posted from Windows XP Media Center Edition with Intellipoint working
>> perfectly!
>>
>> Just dropping by to say "Hi" and thanks to all here for the past help.
>>
>> --
>> XS11E, Killing all posts from Google Groups
>> The Usenet Improvement Project:
>> http://improve-usenet.org
>


Re: New Question, was: Intellipoint help please? by Charlie

Charlie
Fri May 16 10:27:45 PDT 2008

We saved both when I was growing up.

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel


"Dennis Pack" <dennispack@hotmail.nospam.com> wrote in message
news:4C9E1D29-E188-42DE-899C-1A93BA44E2E3@microsoft.com...
> The Top Value stamps were better looking and took less books to get
> things. Have a great day.
>
> --
> Dennis Pack
> XP x64 SP2, Vista Enterprise x64 SP1
> WHS, Office Professional Plus 2007
> "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote in message
> news:B274ABD4-B459-41E7-A55E-EBEB368399BD@microsoft.com...
>> No S&H,but we do accept Canadian Tire Dollars...
>>
>> (and I'm certainly WAY old enough to know what green stamps are.)
>>
>> --
>> Charlie.
>> http://msmvps.com/xperts64
>> http://mvp.support.microsoft.com/profile/charlie.russel
>>
>>
>> "XS11E" <xs11e@NOSPAMyahoo.com> wrote in message
>> news:Xns9A9EE817242C6xs11eyahoocom@127.0.0.1...
>>> "Charlie Russel - MVP" <charlie@mvKILLALLSPAMMERSps.org> wrote:
>>>
>>>> Price has gone up (Fuel Surcharge.<G>) Single positive is now $10 +
>>>> a $5 Surchage. With the upsell to "contributing member", you are
>>>> talking $30, plus GST and PST, of course. (Or, for EU members,
>>>> we'll substitute VAT - it's at least as onerous.<G>)
>>>
>>> The new price is only good if you give S&H Green Stamps (Google them if
>>> your just a kid!)
>>>
>>> Posted from Windows XP Media Center Edition with Intellipoint working
>>> perfectly!
>>>
>>> Just dropping by to say "Hi" and thanks to all here for the past help.
>>>
>>> --
>>> XS11E, Killing all posts from Google Groups
>>> The Usenet Improvement Project:
>>> http://improve-usenet.org
>>
>


Re: New Question, was: Intellipoint help please? by Tony

Tony
Mon May 19 18:28:34 PDT 2008

Nosy, as allways, I must ask - is it known how much memory goes into that
'hole'? I mean, with 4GB of RAM it [may] be a minor loss, since the exact
same information, after it is remapped, is sitting somewhere else. However,
since the system becomes aware of 'some' extra memory it [may] seem as
though you've gained a substantial amount?

If the PCI memory adress space contains a mere 256 Bytes (or something of
the order) the 'remapping', of course, instantly becomes much more
important.

With the current prices on memory, I confess, I am tempted to upgrade even
though I may not really need it, but it should be a good thing anyhow,
depending on the level of waste that it carries.


Tony. . .