John
Sat Aug 26 08:25:01 CDT 2006
You still don't say whether it is a burned copy or a manufactured CD. Very
unlikely anyone would attach an IDE port, so you can forget that and
concentrate on a bad burn/CD (as Charlie suggested) or bad memory (from
x64's standpoint) as suggested by Dennis.
Have you tried reading the file with a file integrity program.
"mbarne" <mbarne@discussions.microsoft.com> wrote in message
news:BBC30408-867F-405B-B397-B6D5510E1C82@microsoft.com...
>I got the CD from my sister in law who is a microsoft certified gold
>partner.
> She had extra license so it is a legal copy. Drive is attached to IDE 1, I
> dont belive it's a SATA drive, but I'll check. Thanks
>
> "Charlie Russel - MVP" wrote:
>
>> OK. So, what's the source of the CD you're using, and what controller is
>> the
>> drive attached to. I'm betting that it's a SATA CD/DVD drive, and I'm
>> guessing you're going to have to plug in a pure IDE CD drive to get the
>> install to run. Beyond that, if you burned the CD yourself, then it could
>> be
>> a bad burn. And even a manufactured CD can be bad.
>>
>> --
>> Charlie.
>>
http://msmvps.com/xperts64
>>
>>
>> mbarne wrote:
>> > "File /AMD64/ ntkrnlmp.exe could not be loaded. The error code is 7.
>> > Setup
>> > cannot continue. press any key to exit."
>> >
>> > "John Barnes" wrote:
>> >
>> >> Since that error usually has an error message with it, why don't you
>> >> give
>> >> the rest of the information.
>> >>
>> >> "mbarne" <mbarne@discussions.microsoft.com> wrote in message
>> >> news:4F2B1958-3C7A-40E7-91CB-678F7885F277@microsoft.com...
>> >>> I did'nt use any drivers as setup wont let me. I would have used the
>> >>> NVRAID 64bit driver disk that shipped with the motherboard
>> >>>
>> >>> "Charlie Russel - MVP" wrote:
>> >>>
>> >>>> OK, which drivers did you use for the 64bit install? You press F6
>> >>>> and
>> >>>> it prompts you? Or you press F6 and it reboots before you get to the
>> >>>> prompt for
>> >>>> the drivers? (clarity is essential here, since timing is telling us
>> >>>> where to
>> >>>> look)
>> >>>>
>> >>>> Also, remove ANY USB devices except keyboard or mouse.
>> >>>>
>> >>>>
>> >>>> --
>> >>>> Charlie.
>> >>>>
http://msmvps.com/xperts64
>> >>>>
>> >>>>
>> >>>> mbarne wrote:
>> >>>>> Sure, Thanks' mobo ABIT KN8 SLI,cpu AMDathlon 64 X2, mem 2 sticks
>> >>>>> OCZ
>> >>>>> 1 gb
>> >>>>> each ddr400, 2 wd hard drives. Error ocures at the press F6 to load
>> >>>>> raid
>> >>>>> driver point of windows install. Same error I got on the ASUS board
>> >>>>> I
>> >>>>> returned. I was able to complete 32 bit install with raid 0.Thanks
>> >>>>> for
>> >>>>> your help.
>> >>>>>
>> >>>>> "mbarne" wrote:
>> >>>>>
>> >>>>>> Trying to install and after I press F6to load raid dvr's, setup
>> >>>>>> stops
>> >>>>>> and I get the error code 7.After talking to asus 14 times, I
>> >>>>>> returned
>> >>>>>> the mobo, and got an abit. same issue, so its not the board. Also
>> >>>>>> pulled
>> >>>>>> mem ect.
>>
>>
>>