Cannot write from CHKDSK

Tutorials Win: Microsoft Windows Forum

- Previous
  - 1
    - Vista 64 - Incomplete booting after increasing RAM I increaased the RAM on my system from 1GB to 3 GB. The sticks are 2 1 GB sticks and 2 512 MB sticks. As long as I keep the 2- 1GB sticks installed Vista will not Boot completely. First It will take about 15 minutes to get to the user selection window. Then after selection the boot process will only go to the opening window with a gray portion showing where the task bar would be located and the rest of the screen black. I will get a dialog stating the Windows Explorer is not responding. It also offers two choices Close the program Wait for the program to respond. I first tried to wait for the program to respond. After a half an hour I figured it wasn't going to so I rebooted and went through the tedious boot process again. When I got the Dialog again I selected close the program. This time, a few seconds later, a still picture of my usual moving pictire screen appeared. However nothing else could be done. I did remove one of the 1 - GB sticks and the system seemed to boot normally. I also checked if the BIOS recognized the new memory and it did. The problem appears to begin after I get the initial moving bar at the beginning of the windows boot process. Tag: Cannot write from CHKDSK Tag: 52532
  - 2
    - System Restore is not working due to RPC server error Hi, I have a problem with my Vista x64 installation. Something happened on my system that lets 'System Protection', 'Backup and Restore center' and 'System Restore' fail with te following message: "The transfer syntax is not supported by the RPC server. (0x800706C2)" I would like to revert to an earlier restore point but unfortunately this problem prevents System Restore from working at all. I post the message here because after some digging I found out that the message has something to do with a 64bit (ndr64) RPC client trying to access a 32bit (dce) RPC server? Suggesting some 64bit component got replaced by a 32bit one? Any help would be much appreciated. Because the only other solution I see now is to reinstall my system. Tx, THomas. Tag: Cannot write from CHKDSK Tag: 52531
  - 3
    - Vista 64 Raid card issue Hi, I have Vista Ultimate 64 bit. I am running a MSI K9n SLI Platinum motherboard and have set up a four drive RAID on it which I use for my software. I have also tried to add my Highpoint Rocket RAID 1720 PCI SATA II 2 channel controller Everything works fine except the Highpoint RAID controller. It has the latest bios installed, and it worked perfectly with Vista ultimate 32bit. Now, with Vista Ultimate 64bit, when I configure the RAID I get an error message saying: "no enough space to copy PCI Option Rom [00:00:00]" and "no enough space to copy PCI Option Rom [00:01:01]" can someone please help me? Tag: Cannot write from CHKDSK Tag: 52525
  - 4
    - Do I install .NET Framework x86 or x64? Running on XP x64... Software I'm trying to install says it requires .NET Framework to work. Visiting Microsoft.com, I see that the latest version is 3, and that it is available in both x86 and x64 flavors. The software requiring it is 32 bits. Which of the x86 and x64 versions of .NET Framework do I install in this scenario? Tag: Cannot write from CHKDSK Tag: 52506
  - 5
    - Updating Live Messenger 8.5 I finally got Live Messenger 8.5 working on my x64 XP... this is my first Messenger beta... will it auto-update when something more stable is released? Or am I stuck having to check regularly and updating manually? Tag: Cannot write from CHKDSK Tag: 52504
  - 6
    - Need free ISO burning utility - recommendations? Looking for a small and free utility to burn ISOs to DVD. Bonus points if it can do Audio CDs, but that's just a luxury, I don't really need it. thanks. Tag: Cannot write from CHKDSK Tag: 52500
  - 7
    - RAM and wireless adapter probs Hello, I would love some help with a strange problem! I recently expanded my system to 2gig ram ...this seemed to intefere with my network wireless adapter ..at first it will connect , 5 mins later the connection will slow and then stop ...other computers on my network are still ok and if I i remove a DIMM my connection returms to normal. so far I have linked the ram and the network adapter to the problem ....but thats where my computer expertise runs into a brick wall!! Anyone got any ideas ..many thanks amd athlon3200 64 asus k8vse win xp 64 pro 2gig ram (sometimes 1.5!! 2 x .5dimm + 1 gig ) broadcom 802.11g network adapter -- Di Tag: Cannot write from CHKDSK Tag: 52488
  - 8
    - problems with DirectX 10 I get an error when trying to open any program that uses DirectX saying that DSOUND.dll is corrupt or missing. SFC confirms that it is corrupt but can not repair it. This is on Vista Ultimate 64bit. Anyone know where I can get a working copy of this file and how to go about replacing it? Tag: Cannot write from CHKDSK Tag: 52486
  - 9
    - x64 compatibility issues hello, we upgraded windows xp pro 32bit to 64bit and we have various issues, one of them is the following: 1. Business objects application can not start giving error message 'connection not opened 64013 ' what we can do about it? thank you in advance. Tag: Cannot write from CHKDSK Tag: 52480
  - 10
    - vista 64 sp1 watermark Can we get rid of the Eval Copy Build 6001 down the bottom right. My copy is a purchased one. Tried the fixes in google to no avail. (reg fix + file replacement. Tag: Cannot write from CHKDSK Tag: 52468
  - 11
    - Applications fail to load after chkdsk auto repair My system with raid5 disks(3disks) 'crashed' yesterday while I was using Internet Explorer 6, visiting some dynamic/ajax enabled webpage, and clicking on an ajax enabled button. Trust me when I say it was this one that locked up my pc this way. Not that worse that I lost all my precious data... some tough luck huh :D I had to manually turn my pc off and turned it on again. After BIOS, the raid controller/bios came with its errors. I skipped the error message and started to boot xp. Chkdsk ran and recovered some free disk space (here the mess really begins, as I would find out afterwards). The problem now is, when I startup my pc, I get stuck with many applications that try to startup, but all fail and error. All seem to be related to COM errors(? as far as I understand the next errors). - skype gives something with ole errors - winrar never opens up nor giving an error message visually (but it does in eventvwr - application - eventid 1000, and with file kernel32.dll) - winvnc gives a dozen or even a few dozens of errormessages every 2-3 secs after login with rpcrt4.dll, and another app as well... These are the noticeable errors. In eventviewer I found some more errors, most userevnt 1000 errors. Some application errors that popup also show "The exception unknown software exception (0xc0000005) occured in the application at location 0x2d828acd ... ", as Adobe acrobat did. And if I start MS Word '03, it says something like "...documents cannot be linked this time..." and locks up. I believe chkdsk shouldn't free up that used disk space. This because I think it was partially pointing to data on the erroring raid5 disk. My suggestion to MS is, -if winxp can see that a RAID is giving errors- that chkdsk should not run after a one-raid5-disk-failure or a RAID degredation. Or else showing by default a message at auto chkdsk, with: "cancel chkdsk if you having RAID errors". Another possibility of the error(my actual problem) is it was created by the pc lockup where it all started. But there was no disk activity during manual shutdown, so... And another possibility is that one special website can lock my browser / pc up, -possibly- since the latest software changes: Some software changes which -might- have messed with my internet explorer: The latest software change I initialized was installing a .net mobile application devtoolkit, a .net sdk(v2.0 64bit), ASP.NET Futures July 2007(v1.2.61025), and a fix for asp.net framework v2.0.50727 (I can't find the fix version/name). This all around the 18th of October. I had the system lockup one time before, but managed to kill internet explorer and I could go on using my system. That was a few days before this happened, and... at the same website(tweakers.net, dutch site) with it's ajax enabled stuff. Last possibility is: the raid striping over the three disks was making a mess. Some error info about the raid array: One disk ended up with 'error' in nvidia mediashield (got an nforce4 chipset with raidcontroller), but healthy and the other 2 disks were 'degraded', but also healthy. This was right after the first reboot and chkdsk. Almost the same message was provided after BIOS by the raid controller (= before winxp boot). After rebuilding the RAID, nothing really changed, except the degradation was gradated again. Sorry for this huge explanation of my problem, but I wanted to give all the details so it could be used to possibly prevent this kind of problems in the future with RAID's, chkdsk by-design-flaws, Internet Explorer/.Net/Ajax or whatever contributed to my problem. But if someone could tell me how to recover (for free, don't going to pay for anybody's bugs) the chkdsk erasing action and/or how to normally use all my apps again without any windows or app reinstall, I would be very pleased. Kind regards, Michael Ponsteen Netherlands Tag: Cannot write from CHKDSK Tag: 52466
  - 12
    - Windows Support Tools I'm using XP Home Addition, but felt my problem would be answered better in this group. I was looking around on my HD and saw a folder C:\Bundle, so I clicked on it. There were two folders in it titled "support" and "valueadd". I clicked on the "support" folder, which went to "tools" and then there was a few files. I clicked on the "suptools" file (Window Installer) and up came a MS Install Wizard. I had two choices in the installer of a "typical" and "complete" install. I decided to do a restore point just in case something went wrong, so I canceled out and made the restore point. Then I went back and did the "typical" install. After looking through what got installed it became apparent this was meant for XP Pro and/or XP-64 and at levels beyond what I would use. There was no "un" install feature nor a Control Panel entry to remove what I just had installed. I went to System Restore and found that installing the Support Tools created it's own restore point and removed "all" previous restore points that were there before I did the install. I clicked on the restore point and after trying there was a message that my PC could "not" be restored to that point. It appears that everything is working OK so far, but I'd like to remove the Support Tools since I won't ever be using any of them. It put all of the apps in C:\Program Files\Support Tools. I'm sure there are register entries and such that got installed; is there anyway to remove what got installed "completely" as an "un" install feature would do ?? If not, will my PC suffer any ill effects from having installed these tools. Thanks in advance. Tag: Cannot write from CHKDSK Tag: 52460
  - 13
    - Cannot detect second hard drive after upgrade to Win XP 64-bit Hello, I recently upgraded my computer with a new motherboard and processor, but I kept my original two hard drives (one primary, one slave). Once the motherboard and processor was installed, I reinstalled windows xp. Prior to the upgrade I was running windows xp professional (32-bit) and decided to upgrade to windows xp professional (64-bit). During setup windows was able to see both hard drives. Windows was installed on the primary hard drive. Naturally, I had to reformat my primary hard drive, the second hard drive was not formatted. After installation I can only see the primary hard drive (C:). There is no icon or drive letter for the second hard drive (which should be labeled E:). I can see the drive in "device manager" and "computer management" but I cannot assign a drive letter. As far as I know, the hard drive and cables are functioning. Why can't I access my second/slave hard drive? Do I have to reformat the drive and lose all of my saved information? Tag: Cannot write from CHKDSK Tag: 52445
  - 14
    - Blue Screen crash over and over again : Hi, I have windows xp 64 bit . My pc is due2core 4gb ram geforce nvidia 8800gtx 768mb . The pc worked perfect untill 2-3 hours ago i played battlefield 2 heavey game that require a lot of memory and graphics . But the game worked fine and everything else untill 2-3 hours ago . Then while playing i had a blue screen for 1 second or less with some strange trrrrrrr noise also for second then the pc got reset . After it i tried to surf internet explorer after 1-3 minutes the IE got stuck then again blue screen for a second without any noise and again the pc got reset . Then i disabled the option of reset pc when getting failure msg . so i could read and see the blue screen msg . The msg is : Dirver_Irql_Not_Less_Or_Equal Then technical information : Stop: 0x000000D1 (0x00000000000000000,0x00000000000000002,0x0000000000000000,0xfffffADF9A9962B6) Then begining dumping physicial memory then finished dumping physical memory . Now i ran two tests rounds of memtest program and no errors on the memories . I checked the video card temp is 63c . The cpu and system temps on the bios are about 43-46c . What could make this problem to happen ? the pc worked fine how can it be something in the hardware got damaged like that ? Is it hardware or software maybe i should re install windows ? Could be windows got defected somehow ? I mean the pc worked fine till now . I hope its not hardware problem . Thnx for the help . -- chocolade1972 ------------------------------------------------------------------------ chocolade1972's Profile: http://forums.techarena.in/member.php?userid=33482 View this thread: http://forums.techarena.in/showthread.php?t=837706 http://forums.techarena.in Tag: Cannot write from CHKDSK Tag: 52443
  - 15
    - White screen When I go on te internet all pages have a white background what has gone wrong please help Tag: Cannot write from CHKDSK Tag: 52442
  - 16
    - 64bit drivers When I went to XP64 I found that some of my hardware (Epson etc) had no 64 bit drivers but after Vista appeared they suddenly supplied Vista x64 and these drivers work fine with XP64. Tag: Cannot write from CHKDSK Tag: 52432
  - 17
    - Win XP Pro 64-bit replacement If I go back to Win XP Pro 32 bit, will I lose all of my hard drive's data, or will I be able to simply downgrade OS without losing anything? Tag: Cannot write from CHKDSK Tag: 52429
  - 18
    - Freeeeeeeeeeze! Hello All, I'm running visa 64 ultimate on my 64 bit pc. Every single time I turn my computer on, I see the welcoming screen, windows opens...& then it freezes on me! Not even the mouse cursor works...it is unresponsive, the only thing I can do is to hold down the power button & turn the computer off. turn it back on again, reload it...& we're away! it works 2nd time (sometimes 3rd.) What's going on with my vista? An easy fix or critically damaged? Any one experience the same problem? Know how to fix it? Help me out someone! Tag: Cannot write from CHKDSK Tag: 52424
  - 19
    - cannot synchronize my clock with the internet Hello Everyone Every time I try and synchronize my computers clock with time.windows.com I get an error has occurred while windows was synchronizing with time.windows.com I have tried the other servers, same error, I have disabled my firewall no change. any ideas? I have Windows X64 Pro. with sp2 Thanks Tag: Cannot write from CHKDSK Tag: 52417
  - 20
    - Live Messenger on XP x64 Can someone give me a direct link to the latest XP x64 compatible version of Live Messenger? Tag: Cannot write from CHKDSK Tag: 52414
  - 21
    - Vista Manager (v1.2.5) http://www.yamicsoft.com/vistamanager/ Very nice set of apps that perform well on my system. Vista Manager is a system utility that helps you optimize, tweak, and clean up Windows Vista. It will increase your system speed, improve system security, and meet all of your expectations. Tag: Cannot write from CHKDSK Tag: 52405
  - 22
    - Logitech Setpoint on Vista 64, install solution I had a problem installing Logitech Setpoint 64 bit Vista version. Whilst I had searched the Logitech site for solutions none of them worked, I have found the cause and the solution ... this should even apply to some other software installations on Vista. Problem: Logitech Setpoint 4.0 for 64Bit Vista will not complete the installation. Cause: Admin rights not applied to the "correct" executable, due to unzipping of files to temp dir. Solution: 1) Run the Logitech Setpoint installer as Administrator This will unzip the actual installation files to a temp folder within C:\Users\UrUserName\AppData\Local\Temp\ 2) Locate the real installation files (search for setup.exe within the above folder) mine was called "pft3786.tmp" - within this folder are the actual set up files. 3) Run the Setup.exe in this folder AS ADMINISTRATOR and the software will install correctly. Hope this helps anyone with similar install problems. Tag: Cannot write from CHKDSK Tag: 52392
  - 23
    - Downgrading to Windows XP from Windows XP 64-bit I have Windows XP Pro 64 bit and do not like it at all! I bought several pieces of hardware and software for audio production (M-Audio NRV10, Pro-Tools) which are not compatible with this OS, and wish to downgrade to the 32 bit version, or simply go right to Vista. If I do this, will I loose all of my data, or will the computer automatically upgrade/downgrade the OS so that all of my data is preserved? Ryan Tag: Cannot write from CHKDSK Tag: 52390
  - 24
    - A clock interrupt was not received on a secondary processor within Hi Guys, Am an experienced system builder, and former software dev MVP. Recently put together a machine; E6700 Quad Core CPU Abit AW9D-Max Motherboard 2GB of PC8500 RAM ATI Radeon X1800 XL etc. I have installed Windows Vista Ultimate 64bit. I am getting random BSODs and reboots. I'm getting a comination of stop codes. Usually it's 'A Clock interrupt was not received on a secondary processor within the allocated time interval' Sometimes it's 0x0A IRQL_NOT_LESS_THAN_OR_EQUAL, but usually it's 0x0101 So, for example; 0x00000101, 0x000...030, 0x000...0, 0xFF..., 0x000...03 0x00000101, 0x000...030, 0x000...0, 0xFF..., 0x000...02 or 0x0000000A, 0x000...030, 0x000...C, 0x000...01, 0xFF.... I have swapped out the memory with known good memory. I have updated the motherboard BIOS to its latest version. I have tried both the latest graphics drivers from ATI and the default Microsoft drivers that Vista installs. The machine is not overheating. The built-in memory tester in windows ran the tests without issue. The machine seems to behave itself while running in Safe Mode. Loading the game 'World of Warcraft' can cause it to crash very quickly - but sometimes I can get a few minutes out of the game. Opening apparently any other game will not cause the machine to crash. Any thoughts? Regards, Jamie Tag: Cannot write from CHKDSK Tag: 52389
  - 25
    - PC WILL NOT SWITCH OFF! This is a multi-part message in MIME format. ------=_NextPart_000_0044_01C813C8.B6E950F0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Morning to you all. Got my Vist x64 system working as I wanted and all = well until yesterday. All of a sudden on switching off it will restart = and I haven't been able to figure out why. I have not changed any = settings and the only way to keep it switched off is to use the main = power switch of the pc. Anyone has any idea on the problem? System is: M/board Asus P5W DH Deluxe Intel Core 2 6600 @ 2.40 GHz Vista Business 64 bit Thanks for any help. AndyB ------=_NextPart_000_0044_01C813C8.B6E950F0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.6000.16546" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT size=3D2>Morning to you all. Got my Vist x64 system working = as I wanted=20 and all well until yesterday. All of a sudden on switching off it will = restart=20 and I haven't been able to figure out why. I have not changed any = settings and=20 the only way to keep it switched off is to use the main power switch of = the pc.=20 Anyone has any idea on the problem?</FONT></DIV> <DIV><FONT size=3D2>System is:</FONT></DIV> <DIV><FONT size=3D2>M/board Asus P5W DH Deluxe</FONT></DIV> <DIV><FONT size=3D2>Intel Core 2 6600 @ 2.40 GHz</FONT></DIV> <DIV><FONT size=3D2>Vista Business 64 bit</FONT></DIV> <DIV><FONT size=3D2>Thanks for any help.</FONT></DIV> <DIV><FONT size=3D2>AndyB</FONT></DIV></BODY></HTML> ------=_NextPart_000_0044_01C813C8.B6E950F0-- Tag: Cannot write from CHKDSK Tag: 52387
- Next
  - 1
    - x64 Drivers for Printers Ok I have a good question. I recently upgraded my Servers from Windows 2003 R2 (x86) to Windows 2003 R2 (x64). Now I am having a few problems but one of my biggest problems right now stems from my printers. I am unable to add the printers via Print Management. This is because HP in all their wonderful wisdom does not make a x64 bit driver disk. Don't ask me why. They only offer it in a downloadable package. Problem is this is not a .zip file which would make sense. It is a .exe install program. Now I have been on the phone with HP for days and have cursed them out for not having a .zip file of the drivers. The install package will not make it through the install process because it is stupid and is looking for 2 things, the printer to be hooked up via USB, which they aren't because they are network printers, and a temp folder that self-implodes as soon as the install program makes it. So their program is hosed and I let them know that. So my question is does anyone know away around this to add the x64 bit drivers, without having to use their stupid program? Tag: Cannot write from CHKDSK Tag: 52373
  - 2
    - How to get back to Administrator login Hi group, I have using the default Administrator login for quite some time. Once I created a user account, the Administrator account is gone for the login screen. Reviewing the help file I see the default Administrator account is intended for the set-up purposes. My question is how do I login to my Administrator account? Thanks in advance, Scott Smith Tag: Cannot write from CHKDSK Tag: 52369
  - 3
    - Att. John Barnes! John, I remember you used to be on a Modem Connection - apparently, you have got yourself something else since. What is that? Here, in Denmark the Power Service Distributors have started putting Broadband onto their power lines, it just needs 'copper', as I understand. I am about to be fed-up with the big city life and may seek out some property out in the big forrests somewhere and would like to gather some of the options in advance - I understand you are living in a not so densely populated area yourself? Tony. . . Tag: Cannot write from CHKDSK Tag: 52363
  - 4
    - Cannot run x86 programs Ok, so this is a weird one. It just sort of started happening out of the blue. My computer gets an IP just fine, but when I attempt to connect to the internet it won't connect. I did some troubleshooting and found that I was also having an issue with windows media player and my antivirus (nod32) crashing. I played around a little more and found that the x64 versions of these programs worked just fine. I am able to get online using the x64 version of IE, and my media player doesn't crash when using the x64 version. Now obviously since the x86 versions are the defaults this causes some issues and most programs don't see that they are connected to the internet (AIM, Gtalk, etc). I consider myself fairly well versed in Vista and I have no idea what to do with this one. Anyway, let me know what you think. Thanks! Tag: Cannot write from CHKDSK Tag: 52355
  - 5
    - CMD Prompt Powertoy using the registry I've found these two simple registry modifications in order to allow the right-click menus of: "Open Elevated Command Prompt Window Here as Administrator" http://www.mydigitallife.info/2007/10/18/open-elevated-command-prompt-window-here-as-administrator-at-current-folder-directly-in-vista-windows-explorer/ and "Run Command Prompt Window as Administrator" http://www.mydigitallife.info/2007/10/17/run-command-prompt-window-as-administrator-by-right-click-computer-in-vista/ Maybe it is a little OT but someone may find the info, and the reading, useful. Carlos Tag: Cannot write from CHKDSK Tag: 52337
  - 6
    - Is using 32-bit appz on x64 better than on x86? Hi, I went x64 because of the benefits found in one of the major programs I was using. As it turns out, problems with plugins means I will be using the 32-bit version of this program on my x64 installation. In fact, most everything installed on my computer is 32-bits, because of various conflicts and problems. Am I better off switching back to XP x86, or sticking with with x64 and continuing to use 32-bits appz on it? Am I doing more harm than good hanging on to x64 when I'm not really using anything 64-bits? Tag: Cannot write from CHKDSK Tag: 52331
  - 7
    - Fatloss computer program I have been using this computer program for a couple weeks now and i am very pleased with the results so far. its a software fatloss program, if your looking for a diet/weightloss plan i reccomend you check this place out first: http://fatloss9.50webs.com Tag: Cannot write from CHKDSK Tag: 52308
  - 8
    - HP Desktop for sale! Hi, I have an unused HP Pavilion with the fallowing specs: # Processor: AMD Athlon 64 X2 4000+ (2.1GHz, 2000MT/s System Bus) # Memory: 2048MB PC2-5300 DDR2 SDRAM memory (2x1GB) (expandable to 8 GB (4 x 2 GB) (64-bit OS)/ 4 GB (4 x 1 GB) (32-bit OS)) # Hard Drive:320GB 7200RPM SATA 3G (3.0 Gb/sec) hard drive # Optical Drive: 16X DVD(+/-)R/RW 12X RAM (+/-)R DL LightScribe SATA drive # Expandable Drive Bay: HP Pocket Media Drive bay # Video Graphics: Integrated graphics # Network Interface: Integrated 10/100BaseT network interface # Sound: High Definition 8-channel audio # Fax/Modem: 56K bps data/fax modem # Operating System: Genuine Windows Vista® Home Premium This is "used" but basically brand new (it has literally been on for no more than 6 total hours..) is only 1 month old.. PRICE: $425 OBO Email- pbdude911@yahoo.com Tag: Cannot write from CHKDSK Tag: 52307
  - 9
    - Watch NFL Games Online Watch NFL Games Online! For every one who wants to watch the games online because they dont live in the teams town or are at work i found a site that has basically every game covered. Its perfect if you have afford a monthly $70 direct tv nfl access subscription. they got a bunch of channels The sites http://nflonline.wizhoo.com Tag: Cannot write from CHKDSK Tag: 52304
  - 10
    - Is it possible to change from 64bit to 32bit Vista? Hi. I've bought Vista Home Premium 64bit, and tried it on my computer. But what I've learned is that some of the programs I need to use due to mye educational program doesn't support 64bit Vista. So, I wondered if it was possible to switch over to 32bit Vista without buying a brand new Vista product, which I just recently did(64bit). Thanks, Stian Tag: Cannot write from CHKDSK Tag: 52299
  - 11
    - Accessing files Problem I have a server with windows server 2003 and other pcs are connected through a domain with the server. I had to format one of the pcs and installed win xp prof again. The problem is this when the user logs in with the password that he had he cant create/delete folder in ( example program files ) because error access dnied is given. I have checked the other pcs and found out that when a user logs in on another computer that he usually dont use the same thing happens. Note:When an administrator password is used everything can be accessed but when a different account is used on another computer that a person dont use the access denied msg appears. Can someone help me out with this please. Tag: Cannot write from CHKDSK Tag: 52297
  - 12
    - Blue Screen Error HELP! While playing online multiplayer games "Shoot em'ups" affter about 20 min's The pc shuts off instantlly with a blue screen flash with error message the setup i use: psu tagan TG1100-U95 1100W ATX2.01 Turbojet mobo MSI-K8 Dimond plus v1 nF chipset PCIE/cpu.amd 3500 skt 939 2GB Corsair XMS3200 pro non-ecc 512 x4 x4 SATA 250GB WD,HDD's X2 Nvidia Geforce 6600GT PCI E X16 graphics cards The system is never overclocked and standard bios setup worked 100% for over a year I can reboot at once and windows loads as normal with the standard popup Recoverd from a serus error ,the manifest reads as follows Server=watson.microsoft.com UI LCID=1033 Flags=1696082 Brand=WINDOWS TitleName=Microsoft Windows DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId ErrorText=A log of this error has been created. HeaderText=The system has recovered from a serious error. Stage2URL=/dw/bluetwo.asp?BCCode=3b&BCP1=00000000C0000047&BCP2=FFFFF80001030919&BCP3=FFFFFADFC8777610&BCP4=0000000000000000&OSVer=5_2_3790&SP=2_0&Product=256_1 DataFiles=C:\DOCUME~1\James\LOCALS~1\Temp\WER04b6.dir00\Mini101807-02.dmp|C:\DOCUME~1\James\LOCALS~1\Temp\WER04b6.dir00\sysdata.xml ErrorSubPath=blue DirectoryDelete=C:\DOCUME~1\James\LOCALS~1\Temp\WER04b6.dir00 There is the Mini101807-02.dmp file and sysdata.xml Can anyone tell me what this means???? Please Tag: Cannot write from CHKDSK Tag: 52292
  - 13
    - Usng more than one audio playback device I use Vista X64 Business and want to route my audio to BOTH the Digital output AND my analogue output. How can I do this? I currently have to set each one independently as default and switch between them. Tag: Cannot write from CHKDSK Tag: 52280
  - 14
    - whats the best recommended vista 64bit registry cleaner hi people i have vista 64bit OS and i cant seem to find a good FULLY 64bit compatible registy cleaner for my pc and i was hoping that someone could help me out finding a good one that is... 1- fully 64bit compatible 2- does everything a reg cleaner should do i dont mind paying for the app and i dont mind how much the software costs as long as its good and compatible, so please dont just post freeware apps Tag: Cannot write from CHKDSK Tag: 52264
  - 15
    - Wmic command-line tool in Vista 64 Can I use the "Wmic command-line tool" to examine the DEP settings in Vista 64? I'm trying to determine if hardware DEP is on or off? Thanks Tag: Cannot write from CHKDSK Tag: 52259
  - 16
    - 32-bit or 64-bit How do I know which I have on my new laptop which has Vista Home Premium? Is there somewhere where I look to find out? Tag: Cannot write from CHKDSK Tag: 52258
  - 17
    - Trouble running trial version setup Hi - this is my first post here. I am having trouble running XP Pro 64-bit trial setup. I had downloaded the ISO from Microsoft, and burned it onto a CD-ROM. Ran the setup from boot, and the setup program goes through its process loading the drivers and whatnot that is needed for setup. However, after it's done loading everything needed, the setup program reboots my machine - I didn't get a chance to choose where I wanted to setup the OS, or whatever. From what I can tell, the program reboots after the message "loading Windows NT file system" or something like that - can't be absolutely sure, as it only appears very briefly. I don't see any kind of error message, either. I've tried re-downloading the ISO, thinkning I had a corrupt download, but the 2nd one I got is the exact same size as the original, so I don't think this is the problem. I don't think I have a corrupt burn either - otherwise setup wouldn't run in the first place, right? Nevertheless, the program I used for that didn't give me any error, either. The hardware has been working fine since Day 1 I got this machine 2 years ago. I have checked with the manufacturer of my motherboard for a BIOS update I seem to already have the latest - last updated back in May, 2006, so I don't think it's an issue with that. I have heard some having trouble with Raid support, but I have this disabled in my BIOS as I don't have a need for it. Sorry for the long post, but I wanted to make sure I covered the common problems first. I would really appreciate any input. Here are my specs: Motherboard: MSI K8N Neo4 Platinum CPU: AMD Athlon 64 3800+ (this *should* support the OS) Memory: 1 GB DDR 400 Hard Disk: I have 2 - 1 SATA 120 MB drive (Western Digital, has 32-bit XP Pro), & 1 IDE 6 GB drive (Quantum Fireball - this is the drive I intend to install the 64-bit trial - it's empty) Tag: Cannot write from CHKDSK Tag: 52244
  - 18
    - I can't delete a folder on my desktop When I renamed a folder on my desktop, instead of typing in a word, I typed "Alt+255". This makes the text disappear. This also makes the file hard to delete. I can't delete the folder. In command prompt, if I try to delete it, it says "The syntax of the command is incorrect." I also tried "del *.*" in the command prompt, but this only worked for other things in the prompt. I'm not sure what to do, and would appreciate your advice. Thanks, Brian Tag: Cannot write from CHKDSK Tag: 52242
  - 19
    - I can't delete a folder on my desktop When I renamed a folder on my desktop, instead of typing in a word, I typed "Alt+255". This makes the text disappear. This also makes the file hard to delete. I can't delete the folder. In command prompt, if I try to delete it, it says "The syntax of the command is incorrect." I also tried "del *.*" in the command prompt, but this only worked for other things in the prompt. I'm not sure what to do, and would appreciate your advice. Thanks, Brian Tag: Cannot write from CHKDSK Tag: 52241
  - 20
    - Can I burn an ISO file in WinXP x64 without using 3rd party applications? ..? Tag: Cannot write from CHKDSK Tag: 52227
  - 21
    - DEP Data Execution Prevention (exclude List) in vista 64 I have excluded some programs by putting them in the exclude list. When I remove them with remove button & apply settings they all re-appear when I close then re-enter. How do I remove items from the exclude list? This happens even if I hit apply & re-boot. I also tried to remove them in safe mode,they all just reappear upon close & re-open Tag: Cannot write from CHKDSK Tag: 52219
  - 22
    - Over-Clocking in Vista 64 How well does Vista Ultimate 64 handle "Over clocking"? Tag: Cannot write from CHKDSK Tag: 52216
  - 23
    - Update problem Hi, I am running XP 64bit on a dual AMD prcessor machine. I have tried many times but the following 2 updates will not install and they are marked as critical. Any ideas please? 1) Security Update for Microsoft XML Core Services 6.0 and Microsoft XML Core Services 6.0 Service Pack 1 (KB933579) 2) Microsoft .NET Framework 3.0: x64 (KB928416) Tag: Cannot write from CHKDSK Tag: 52208
  - 24
    - USB devices diplay I'm wanting to reformat a USB external drive. I have just installed the 64bit Home Premium version of Vista on a newly built system and I guess I'm just going to have to ask some questions until I learn some things on this version. I want to use a USB external drive that currently is formatted in Linux. When I plug it in and go to 'computer', it shows Devices with Removeable Storage (3) and physically shows three devices; Drive D: my master DVD drive, Drive E: my slave DVD drive, and Drive F. However, when I right click on drive F, and then cklick on Properties>Hardware, it lists both of my DVD drives, my printer, my external drive, and both of my hard drives. When I click on Start>Computer....Can I make the system display all devices individually so that I can simply click on each one? Thanks Tag: Cannot write from CHKDSK Tag: 52206
  - 25
    - 32 bi NetBIOS() caused RTC checks to complain under 64 bit Win2003 Hi The below routine works just fine on 32 bit Windows 2000, XP and Server 2003. But under WOW32 on a 2003 64 bit system the debug code (compiled with runtime checks) fails claiming that "Run-Time Check Failure #2 - Stack around the variable 'ncbO' was corrupted." Release version without the check seems to work ok but i want to debug. I'm using MSVC 2003 7.1.6030 and don't currently have time to convert the code to 64 bit. Here is the routine which purpose is to simulate use of "NBTSTAT -a computername" to check if a workstation is online. Netbios is after all considerably more reliable than ping. BOOL CheckOnline(char *p_szComputername) { NCB ncbO; int i; UCHAR uc; char sz[50]; struct { ADAPTER_STATUS as; NAME_BUFFER nb[20]; } X; if (p_szComputername==NULL) return FALSE; if ((i=strlen(p_szComputername))<2) return FALSE; if (i>16) return FALSE; memset(&ncbO, 0, sizeof(NCB)); ncbO.ncb_buffer = &X; memset(&X, 0, sizeof(X)); ncbO.ncb_length=sizeof(X); ncbO.ncb_lana_num = iBestLANadapter(); ncbO.ncb_command = NCBRESET; Netbios(&ncbO); ncbO.ncb_command = NCBASTAT; memcpy(ncbO.ncb_name, "IMIPserver ", 16); memcpy(sz, p_szComputername, i); sz[i]=0; strupr(sz); memset(ncbO.ncb_callname, ' ', 16); memcpy(ncbO.ncb_callname, sz, i); uc=Netbios(&ncbO); if (uc==NRC_CMDTMO) { Sleep(1000); ncbO.ncb_length=sizeof(X); uc=Netbios(&ncbO); } if (uc!=NRC_GOODRET && uc!=NRC_INCOMP) return FALSE; if (uc==NRC_INCOMP) { return FALSE; /* Need to issue second command ? */ } return TRUE; } Can it be possible that the WOW32 has a bug making it update the structures with data in 64 bit format? But even so i would think that huge buffer should be big enough and i have also tried to add extra buffers around it. Maybe it's just the runtime check routine that gets confused somehow. Help! Also, can someone tell how one is supposed to handle NRC_INCOMP ? And is the NCBRESET step always required? - Sten Tag: Cannot write from CHKDSK Tag: 52204

When I run CHKDSK, it says F parameter not specified. Running CHKDSK in
read-only mode. I need the F paramter to fix an index error.

Top

Re: Cannot write from CHKDSK by Tony

Tony
Wed Oct 24 11:54:58 PDT 2007

Type

CHKDSK /?

for help

CHKDSK /F

for the immidiate issue. And, lowercase is o.k.

Tony. . .

"cohenjer" <cohenjer@discussions.microsoft.com> wrote in message
news:1D918B1F-71A7-47FF-9C7E-88A98AB6F290@microsoft.com...
> When I run CHKDSK, it says F parameter not specified. Running CHKDSK in
> read-only mode. I need the F paramter to fix an index error.

Top

Re: Cannot write from CHKDSK by John

John
Fri Oct 26 14:02:58 PDT 2007

You don't say what system you are running. In Vista64, you will need to run
in administrative mode. In the start search, type comm when Command Prompt
appears, right click and run as administrator.

"cohenjer" <cohenjer@discussions.microsoft.com> wrote in message
news:1D918B1F-71A7-47FF-9C7E-88A98AB6F290@microsoft.com...
> When I run CHKDSK, it says F parameter not specified. Running CHKDSK in
> read-only mode. I need the F paramter to fix an index error.

Top